PH CALIBRATION FILE GENERATED ON: 12/27/2021 14:58

** START CONFIG FILE COPY BLOCK **
Durafet SN = 15, APEX# XXXX
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-1.15296e-14,1.68484e-11,-7.17136e-08,-1.02883e-03, =k2(fP)*T
-7.12904e-06, =k3*P
2.97914e-10, =k4*P^3
1.57641e-11, =k5*P^4
-2.14683e-14, =k6*P^5
1.06335e-17, =k7*P^6
-1.79920e-21, =k8*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2(T)	k0(HCl)	R^2	k6	k5	k4	k3	k2	k1	k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
12/18-12/24/2021			NaN	-1.08284e-03	-1.43547	0.9998	-1.79920e-21	1.06335e-17	-2.14683e-14	1.57641e-11	2.97914e-10	-7.12904e-06	-1.43525	0.9832									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	15	
pH stem mfg:	MBARI	
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF15_cal_every2C.csv	
PT test channel :		
HCl concentration:	0.01000	Molar
k2 Calibration window:	12/18/2021 01:07	12/24/2021 06:01
Data subset:	ALL	
Vrs drift rate:	NO DATA	mV/day
Vk drift rate:	NO DATA	mV/day
Avg std Vk	190.38056	uVolts
Average k2:	-1.0828e-03	V/degC
Std dev k2:	5.2845e-05	V/degC
k2 f(P) c0	-1.0288e-03	
k2 f(P) c1	-7.1714e-08	
k2 f(P) c2	1.6848e-11	
k2 f(P) c3	-1.1530e-14	
k0 HCL:	-1.4355	Volts
Avg Ik:	20.32	nano amps
Std dev Ik:	0.64	nano amps
Avg Ib:	3.39	nano amps
Std dev Ib:	36.11	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
21.0	-1.0241e-03	1.6803e-07	-1.4355	2.0938e-06	0.9998	8070	1.9	19.7
37.8	-1.0305e-03	1.2042e-06	-1.4355	1.5262e-05	0.9997	210	1.9	19.7
62.0	-1.0316e-03	1.3210e-06	-1.4357	1.6306e-05	0.9995	285	1.9	19.7
88.3	-1.0387e-03	1.8387e-06	-1.4358	2.3180e-05	0.9992	245	1.9	19.7
124.7	-1.0428e-03	2.0198e-06	-1.4361	2.5106e-05	0.9983	463	1.9	19.7
173.6	-1.0432e-03	2.5844e-06	-1.4364	3.2311e-05	0.9972	466	1.9	19.7
249.0	-1.0454e-03	2.5679e-06	-1.4368	3.1915e-05	0.9945	911	1.9	19.7
349.1	-1.0529e-03	2.7993e-06	-1.4373	3.4651e-05	0.9937	895	1.9	19.8
448.5	-1.0582e-03	2.8186e-06	-1.4376	3.4609e-05	0.9937	889	1.9	19.8
548.6	-1.0612e-03	2.6575e-06	-1.4380	3.2890e-05	0.9945	889	1.9	19.8
649.4	-1.0741e-03	2.5796e-06	-1.4381	3.2484e-05	0.9952	840	1.9	19.8
749.9	-1.0785e-03	2.4936e-06	-1.4384	3.0935e-05	0.9954	858	1.9	19.8
899.5	-1.0880e-03	2.0061e-06	-1.4387	2.4752e-05	0.9941	1734	1.9	19.8
1099.5	-1.1003e-03	1.9221e-06	-1.4392	2.3688e-05	0.9948	1709	1.9	19.8
1299.5	-1.1156e-03	1.3813e-06	-1.4399	1.7046e-05	0.9974	1708	1.9	19.8
1499.6	-1.1383e-03	1.6832e-06	-1.4405	2.0727e-05	0.9963	1688	1.9	19.8
1699.3	-1.1635e-03	1.7563e-06	-1.4407	2.1740e-05	0.9962	1678	1.9	19.8
1898.2	-1.1833e-03	1.3237e-06	-1.4407	1.6472e-05	0.9980	1615	1.9	19.8
2059.1	-1.2036e-03	5.1239e-07	-1.4405	6.4571e-06	0.9995	2523	2.0	19.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	7.6886e-08	
f(P) R*R:	0.9832	
f(P) c0	-1.4352e+00	
f(P) c1	-7.1290e-06	
f(P) c2	2.9791e-10	
f(P) c3	1.5764e-11	
f(P) c4	-2.1468e-14	
f(P) c5	1.0634e-17	
f(P) c6	-1.7992e-21	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: