PH CALIBRATION FILE GENERATED ON: 12/27/2021 15:00

** START CONFIG FILE COPY BLOCK **
Durafet SN = 15, APEX# XXXX
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-2.29656e-14,5.33636e-11,-1.01366e-07,-1.03398e-03, =k2(fP)*T
3.39263e-07, =k3*P
-2.73880e-08, =k4*P^3
6.44545e-11, =k5*P^4
-6.40072e-14, =k6*P^5
2.81590e-17, =k7*P^6
-4.51332e-21, =k8*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2(T)	k0(HCl)	R^2	k6	k5	k4	k3	k2	k1	k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
12/18-12/24/2021			NaN	-1.09165e-03	-1.43540	0.9998	-4.51332e-21	2.81590e-17	-6.40072e-14	6.44545e-11	-2.73880e-08	3.39263e-07	-1.43549	0.9959									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	15	
pH stem mfg:	MBARI	
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF15_cal_every2C.csv	
PT test channel :		
HCl concentration:	0.01000	Molar
k2 Calibration window:	12/18/2021 02:57	12/24/2021 05:45
Data subset:	ASCENDING	
Vrs drift rate:	NO DATA	mV/day
Vk drift rate:	NO DATA	mV/day
Avg std Vk	190.38056	uVolts
Average k2:	-1.0917e-03	V/degC
Std dev k2:	5.2260e-05	V/degC
k2 f(P) c0	-1.0340e-03	
k2 f(P) c1	-1.0137e-07	
k2 f(P) c2	5.3364e-11	
k2 f(P) c3	-2.2966e-14	
k0 HCL:	-1.4354	Volts
Avg Ik:	20.34	nano amps
Std dev Ik:	0.64	nano amps
Avg Ib:	3.63	nano amps
Std dev Ib:	36.91	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
22.9	-1.0329e-03	1.5949e-06	-1.4354	1.9587e-05	0.9998	87	1.9	19.7
39.1	-1.0358e-03	1.4410e-06	-1.4355	1.7973e-05	0.9998	113	1.9	19.7
62.1	-1.0392e-03	1.6380e-06	-1.4356	2.0152e-05	0.9997	130	1.9	19.7
87.2	-1.0435e-03	1.6442e-06	-1.4357	2.0199e-05	0.9997	121	1.9	19.7
123.9	-1.0478e-03	1.4164e-06	-1.4358	1.7424e-05	0.9996	236	1.9	19.7
173.9	-1.0524e-03	1.4326e-06	-1.4360	1.8097e-05	0.9996	230	2.0	19.7
249.8	-1.0586e-03	1.5325e-06	-1.4363	1.9254e-05	0.9991	441	1.9	19.7
349.6	-1.0654e-03	1.3589e-06	-1.4367	1.6847e-05	0.9993	446	1.9	19.7
448.7	-1.0704e-03	1.3438e-06	-1.4371	1.6401e-05	0.9993	441	1.9	19.7
548.6	-1.0746e-03	1.2916e-06	-1.4374	1.5956e-05	0.9994	441	1.9	19.7
649.6	-1.0826e-03	1.2201e-06	-1.4377	1.5056e-05	0.9994	443	1.9	19.7
749.8	-1.0932e-03	1.1167e-06	-1.4379	1.3781e-05	0.9995	434	1.9	19.7
899.5	-1.1020e-03	1.1214e-06	-1.4382	1.3808e-05	0.9991	862	1.9	19.7
1099.8	-1.1065e-03	1.7876e-06	-1.4388	2.1969e-05	0.9978	854	1.9	19.7
1300.0	-1.1177e-03	2.5069e-06	-1.4399	3.0838e-05	0.9958	849	1.9	19.7
1499.6	-1.1440e-03	1.8765e-06	-1.4407	2.3055e-05	0.9978	837	2.0	19.7
1699.2	-1.1738e-03	9.3566e-07	-1.4410	1.1579e-05	0.9995	836	2.0	19.7
1897.0	-1.1957e-03	7.6950e-07	-1.4408	9.4138e-06	0.9997	813	2.0	19.7
2029.4	-1.2052e-03	1.3338e-06	-1.4406	1.6448e-05	0.9997	278	2.0	19.7

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	1.3610e-08	
f(P) R*R:	0.9959	
f(P) c0	-1.4355e+00	
f(P) c1	3.3926e-07	
f(P) c2	-2.7388e-08	
f(P) c3	6.4454e-11	
f(P) c4	-6.4007e-14	
f(P) c5	2.8159e-17	
f(P) c6	-4.5133e-21	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: