PH CALIBRATION FILE GENERATED ON: 01/10/2022 09:44

** START CONFIG FILE COPY BLOCK **
Durafet SN = 15, APEX# XXXX
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-1.99115e-05, =k2*T
-2.20755e-07, =k3*P
-1.03133e-08, =k4*P^3
3.01843e-11, =k5*P^4
-3.39617e-14, =k6*P^5
1.63102e-17, =k7*P^6
-2.79856e-21, =k8*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2(T)	k0(HCl)	R^2	k6	k5	k4	k3	k2	k1	k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
01/01-01/05/2022			NaN	-1.99115e-05	-1.09464	0.0030	-2.79856e-21	1.63102e-17	-3.39617e-14	3.01843e-11	-1.03133e-08	-2.20755e-07	-1.09447	0.7834									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	15	
pH stem mfg:	MBARI	
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF15_cal_70Ids.csv	
PT test channel :		
HCl concentration:	0.01000	Molar
k2 Calibration window:	01/01/2022 11:50	01/05/2022 14:07
Data subset:	ASCENDING	
Vrs drift rate:	NO DATA	mV/day
Vk drift rate:	NO DATA	mV/day
Avg std Vk	181.17750	uVolts
Average k2:	-1.9911e-05	V/degC
Std dev k2:	1.4150e-05	V/degC
k2 f(P) c0	-1.9911e-05	
k2 f(P) c1	0.0000e+00	
k0 HCL:	-1.0946	Volts
Avg Ik:	20.66	nano amps
Std dev Ik:	0.65	nano amps
Avg Ib:	-0.62	nano amps
Std dev Ib:	2.87	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
22.9	2.4881e-06	5.9111e-06	-1.0946	5.5766e-05	0.0030	60	2.0	15.8
39.1	9.4504e-07	5.3746e-06	-1.0947	4.9578e-05	0.0004	80	2.0	15.8
62.4	-1.6791e-06	5.0280e-06	-1.0947	4.6139e-05	0.0012	96	2.0	15.8
87.5	-2.6667e-06	5.1583e-06	-1.0947	4.7804e-05	0.0033	83	2.0	15.8
124.2	-6.1244e-06	3.7032e-06	-1.0947	3.4144e-05	0.0163	167	2.0	15.8
174.2	-6.7998e-06	3.5961e-06	-1.0948	3.2950e-05	0.0217	163	2.0	15.8
249.0	-1.0069e-05	2.7397e-06	-1.0949	2.5474e-05	0.0419	311	2.0	15.8
348.3	-1.4464e-05	2.7408e-06	-1.0950	2.5319e-05	0.0847	303	2.0	15.8
447.9	-2.3983e-05	2.9916e-06	-1.0950	2.8689e-05	0.1889	278	2.0	15.8
548.4	-2.6459e-05	3.0317e-06	-1.0950	2.9049e-05	0.2175	276	3.9	15.8
649.5	-2.1163e-05	2.3010e-06	-1.0951	2.1081e-05	0.2276	289	1.9	15.8
749.6	-2.7919e-05	2.4356e-06	-1.0951	2.2138e-05	0.3156	287	1.9	15.8
899.3	-3.2532e-05	1.8620e-06	-1.0951	1.7106e-05	0.3487	572	1.9	15.8
1099.1	-3.6471e-05	2.4142e-06	-1.0953	2.2104e-05	0.2884	565	1.9	15.8
1299.3	-3.7275e-05	2.7070e-06	-1.0957	2.4799e-05	0.2523	564	1.9	15.8
1499.4	-3.8490e-05	2.9687e-06	-1.0959	2.7159e-05	0.2331	555	1.9	15.8
1699.0	-4.0098e-05	3.4270e-06	-1.0958	3.1479e-05	0.1993	552	1.9	15.8
1897.5	-3.0302e-05	4.1033e-06	-1.0954	3.7577e-05	0.0925	537	2.0	15.8
2029.8	-2.5256e-05	7.3781e-06	-1.0952	6.7430e-05	0.0608	183	2.0	15.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	6.1215e-08	
f(P) R*R:	0.7834	
f(P) c0	-1.0945e+00	
f(P) c1	-2.2076e-07	
f(P) c2	-1.0313e-08	
f(P) c3	3.0184e-11	
f(P) c4	-3.3962e-14	
f(P) c5	1.6310e-17	
f(P) c6	-2.7986e-21	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: