PH CALIBRATION FILE GENERATED ON: 01/06/2022 15:53

** START CONFIG FILE COPY BLOCK **
Durafet SN = 15, APEX# XXXX
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
1.75568e-11,-5.71035e-08,4.45698e-06, =k2(fP)*T
-1.90625e-06, =k3*P
-3.40888e-09, =k4*P^3
1.54471e-11, =k5*P^4
-1.81354e-14, =k6*P^5
8.65497e-18, =k7*P^6
-1.45816e-21, =k8*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2(T)	k0(HCl)	R^2	k6	k5	k4	k3	k2	k1	k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
12/31-01/05/2022			NaN	-2.04708e-05	-1.09464	0.0000	-1.45816e-21	8.65497e-18	-1.81354e-14	1.54471e-11	-3.40888e-09	-1.90625e-06	-1.09462	0.6011									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	15	
pH stem mfg:	MBARI	
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF15_cal_70Ids.csv	
PT test channel :		
HCl concentration:	0.01000	Molar
k2 Calibration window:	12/31/2021 07:10	01/05/2022 15:30
Data subset:	ALL	
Vrs drift rate:	NO DATA	mV/day
Vk drift rate:	NO DATA	mV/day
Avg std Vk	181.17750	uVolts
Average k2:	-2.0471e-05	V/degC
Std dev k2:	1.7482e-05	V/degC
k2 f(P) c0	4.4570e-06	
k2 f(P) c1	-5.7104e-08	
k2 f(P) c2	1.7557e-11	
k0 HCL:	-1.0946	Volts
Avg Ik:	20.66	nano amps
Std dev Ik:	0.65	nano amps
Avg Ib:	-0.59	nano amps
Std dev Ib:	2.86	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
21.0	3.4336e-07	6.5198e-07	-1.0946	6.6117e-06	0.0000	5700	1.9	17.8
37.9	9.8157e-08	4.3495e-06	-1.0947	4.0339e-05	0.0000	145	2.0	17.7
62.3	1.6800e-06	3.4284e-06	-1.0947	3.1936e-05	0.0012	209	2.0	17.7
88.3	-1.5788e-06	4.0722e-06	-1.0948	3.8267e-05	0.0010	159	2.0	17.7
124.1	-6.4192e-06	3.1346e-06	-1.0948	2.9300e-05	0.0127	327	2.0	17.8
174.1	-6.1661e-06	3.3813e-06	-1.0950	3.1269e-05	0.0099	335	2.0	17.8
249.4	-1.0437e-05	2.9703e-06	-1.0951	2.8125e-05	0.0195	624	2.0	17.8
348.7	-1.2202e-05	3.5283e-06	-1.0953	3.3056e-05	0.0194	608	1.9	17.8
448.2	-1.0211e-05	4.0803e-06	-1.0954	3.8866e-05	0.0107	581	1.9	17.8
548.6	-1.1022e-05	4.2760e-06	-1.0955	4.0827e-05	0.0114	579	1.9	17.8
649.0	-2.6274e-05	4.1653e-06	-1.0954	4.0048e-05	0.0675	552	1.9	17.8
749.9	-2.3941e-05	4.1175e-06	-1.0954	3.8317e-05	0.0553	579	1.9	17.8
899.4	-3.0395e-05	2.7851e-06	-1.0954	2.6112e-05	0.0931	1162	1.9	17.8
1099.2	-3.8933e-05	2.2162e-06	-1.0954	2.0685e-05	0.2122	1148	1.9	17.8
1299.5	-4.3984e-05	1.7655e-06	-1.0956	1.6503e-05	0.3515	1147	1.9	17.8
1499.4	-4.8295e-05	2.3560e-06	-1.0957	2.1783e-05	0.2730	1121	1.9	17.8
1698.6	-5.1799e-05	2.5124e-06	-1.0955	2.3210e-05	0.2793	1099	1.9	15.8
1899.0	-4.3029e-05	2.7885e-06	-1.0952	2.6008e-05	0.1841	1057	2.0	15.8
2058.9	-2.6381e-05	2.4099e-06	-1.0950	2.2606e-05	0.0692	1615	2.0	17.7

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	9.6318e-08	
f(P) R*R:	0.6011	
f(P) c0	-1.0946e+00	
f(P) c1	-1.9063e-06	
f(P) c2	-3.4089e-09	
f(P) c3	1.5447e-11	
f(P) c4	-1.8135e-14	
f(P) c5	8.6550e-18	
f(P) c6	-1.4582e-21	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: