PH CALIBRATION FILE GENERATED ON: 07/06/2022 15:00
GDF 23
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = XXXX, APEX# 23
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-4.57190e-14,1.43555e-10,-1.42007e-07,-1.03739e-03, =k2(fP)*T
-5.76316e-06, =k3*P
2.04877e-08, =k4*P^3
-3.21301e-11, =k5*P^4
1.85986e-14, =k6*P^5
-3.07186e-18, =k7*P^6
-2.05729e-22, =k8*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
06/29-07/04/2022			-0.009				-4.57190e-14	1.43555e-10	-1.42007e-07	-1.03739e-03	-1.38425	0.9999			-2.05729e-22	-3.07186e-18	1.85986e-14	-3.21301e-11	2.04877e-08	-5.76316e-06	-1.38398e+00	0.8071	GDF		23									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	23	
pH stem mfg:	MBARI	GDF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF23_062722_Ch E.csv	
PT test channel :		
HCl concentration:	0.01000	Molar
k2 Calibration window:	06/29/2022 04:13	07/04/2022 07:18
Data subset:	ASCENDING	
Vrs drift rate:	-0.00925	mV/day
Vk drift rate:	-3.81955	mV/day
Avg std Vk	101.93739	uVolts
Average k2:	-1.0725e-03	V/degC
Std dev k2:	2.2709e-05	V/degC
k2 f(P) c0	-1.0374e-03	
k2 f(P) c1	-1.4201e-07	
k2 f(P) c2	1.4355e-10	
k2 f(P) c3	-4.5719e-14	
k0 HCL:	-1.3842	Volts
Avg Ik:	7.58	nano amps
Std dev Ik:	1.44	nano amps
Avg Ib:	1.15	nano amps
Std dev Ib:	2.22	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
24.2	-1.0444e-03	2.6038e-06	-1.3842	3.7596e-05	0.9999	23	1.9	19.8
38.9	-1.0468e-03	1.9763e-06	-1.3843	2.7248e-05	0.9999	34	1.9	19.8
61.3	-1.0475e-03	1.6303e-06	-1.3843	2.3313e-05	0.9999	34	1.9	19.8
88.1	-1.0490e-03	1.9386e-06	-1.3843	2.7603e-05	0.9999	28	1.9	19.8
124.0	-1.0517e-03	1.5221e-06	-1.3843	2.1609e-05	0.9999	50	1.9	19.8
174.5	-1.0527e-03	1.5305e-06	-1.3844	2.1522e-05	0.9999	49	1.9	19.8
247.4	-1.0539e-03	1.4602e-06	-1.3846	2.0106e-05	0.9998	94	1.9	19.8
348.7	-1.0616e-03	1.4133e-06	-1.3847	1.9822e-05	0.9998	97	1.9	19.8
450.7	-1.0724e-03	1.4926e-06	-1.3849	2.0995e-05	0.9998	91	1.9	19.8
551.3	-1.0899e-03	1.4779e-06	-1.3848	2.0401e-05	0.9998	93	1.9	19.8
648.2	-1.1014e-03	2.1985e-06	-1.3848	3.3245e-05	0.9997	70	1.9	19.8
748.7	-1.1007e-03	1.7065e-06	-1.3849	2.3667e-05	0.9998	85	1.9	19.8
899.8	-1.0708e-03	2.8051e-06	-1.3856	3.9137e-05	0.9988	179	1.9	19.8
1098.7	-1.0508e-03	5.2930e-06	-1.3869	7.5139e-05	0.9958	167	2.0	19.8
1300.6	-1.0841e-03	5.5532e-06	-1.3869	7.7354e-05	0.9956	169	2.0	19.8
1500.6	-1.0889e-03	5.3966e-06	-1.3862	7.4416e-05	0.9959	169	2.0	19.8
1700.1	-1.0938e-03	6.2764e-06	-1.3855	8.6786e-05	0.9946	166	2.1	19.8
1899.9	-1.1041e-03	7.3057e-06	-1.3849	1.0288e-04	0.9929	166	2.1	19.8
2033.0	-1.1126e-03	1.3901e-05	-1.3844	1.8766e-04	0.9916	56	2.1	19.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	1.6891e-07	
f(P) R*R:	0.8071	
f(P) c0	-1.3840e+00	
f(P) c1	-5.7632e-06	
f(P) c2	2.0488e-08	
f(P) c3	-3.2130e-11	
f(P) c4	1.8599e-14	
f(P) c5	-3.0719e-18	
f(P) c6	-2.0573e-22	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: