| Tool list of: |
| X:\ESP\DWSM\4K DWSM\SOLIDWORKS FILES\WAND\FIXTURE P-201059-11.MCX-5 |
| ICON | Type | TlNo | Cut Ø | Flute length | Rad | Arbor Ø | Shldr length | Overall length | SS | Feed | Thds | Tip angle | Cycle time | ZMin | ZMax | Manufacturer | Chuck | Comment | User 1 | User 2 | Insert |
|
Spot Drill | 1 | 0.50 | 2.00 | 0.00 | 0.50 | 2.50 | 3.00 | 534 | 1.07 | 0.00 | 90.00 | 00:01:47 | -0.25 | 0.10 | 1/2 SPOTDRILL | |||||
|
Drill | 2 | 0.25 | 2.00 | 0.00 | 0.25 | 2.50 | 3.00 | 1086 | 4.17 | 0.00 | 118.00 | 00:00:23 | -0.57 | 0.10 | LTR. D DRILL | |||||
|
Reamer | 3 | 0.25 | 1.00 | 0.00 | 0.50 | 1.50 | 2.00 | 850 | 8.00 | 20.00 | 118.00 | 00:00:16 | -0.50 | 0.10 | ||||||
|
Drill | 4 | 0.42 | 2.00 | 0.00 | 0.42 | 2.50 | 3.00 | 633 | 4.26 | 0.00 | 118.00 | 00:00:52 | -0.88 | 0.10 | 27/64 DRILL | |||||
|
Tap RH | 5 | 0.50 | 2.00 | 0.00 | 0.50 | 2.50 | 3.00 | 534 | 41.14 | 13.00 | 180.00 | 00:00:08 | -0.65 | 0.10 | 1/2-13 TAPRH | |||||
|
End Mill | 6 | 0.25 | 0.50 | 0.00 | 0.25 | 0.75 | 2.50 | 2139 | 6.42 | 0.00 | 180.00 | 00:00:06 | -0.25 | 0.25 | 1/4 FLAT ENDMILL |
(TList V4.1 © 2009 GMCCS)