| Tool list of: |
| X:\ESP\DWSM\4K DWSM\SOLIDWORKS FILES\WAND\P-201062-11.MCX-5 |
| ICON | Type | TlNo | Cut Ø | Flute length | Rad | Arbor Ø | Shldr length | Overall length | SS | Feed | Thds | Tip angle | Cycle time | ZMin | ZMax | Manufacturer | Chuck | Comment | User 1 | User 2 | Insert |
|
End Mill | 1 | 0.19 | 0.44 | 0.00 | 0.19 | 0.50 | 2.38 | 2852 | 6.16 | 0.00 | 180.00 | 00:36:54 | -0.25 | 0.25 | 3/16 FLAT ENDMILL | |||||
|
Spot Drill | 2 | 0.50 | 2.00 | 0.00 | 0.50 | 2.50 | 3.00 | 534 | 1.07 | 0.00 | 90.00 | 00:01:52 | -0.19 | 0.10 | 1/2 SPOTDRILL | |||||
|
Drill | 3 | 0.38 | 2.00 | 0.00 | 0.38 | 2.50 | 3.00 | 713 | 4.22 | 0.00 | 118.00 | 00:00:15 | -0.36 | 0.10 | 3/8 DRILL | |||||
|
Drill | 4 | 0.15 | 2.00 | 0.00 | 0.15 | 2.50 | 3.00 | 1759 | 4.22 | 0.00 | 118.00 | 00:00:30 | -0.30 | 0.10 | NO. 24 DRILL | |||||
|
Chamfer Mill | 5 | 0.25 | 1.00 | 0.00 | 0.50 | 1.20 | 2.00 | 0 | 0.00 | 0.00 | 45.00 | 00:01:03 | -0.01 | 0.25 | 1/4 CHAMFER MILL |
(TList V4.1 © 2009 GMCCS)