| Tool list of: |
| X:\ESP\DWSM\4K DWSM\SOLIDWORKS FILES\WAND\P-201082-11.MCX-5 |
| ICON | Type | TlNo | Cut Ø | Flute length | Rad | Arbor Ø | Shldr length | Overall length | SS | Feed | Thds | Tip angle | Cycle time | ZMin | ZMax | Manufacturer | Chuck | Comment | User 1 | User 2 | Insert |
|
Face Mill | 1 | 3.00 | 1.97 | 0.00 | 1.00 | 2.00 | 2.10 | 1286 | 20.59 | 0.00 | 45.00 | 00:05:59 | 0.00 | 0.30 | 3" Face Mill | |||||
|
End Mill | 2 | 0.50 | 1.00 | 0.00 | 0.50 | 1.50 | 3.00 | 1069 | 6.42 | 0.00 | 180.00 | 00:10:48 | -1.00 | 0.25 | 1/2 FLAT ENDMILL | |||||
|
Spot Drill | 3 | 0.50 | 2.00 | 0.00 | 0.50 | 2.50 | 3.00 | 534 | 1.07 | 0.00 | 90.00 | 00:00:07 | -0.25 | 0.10 | 1/2 SPOTDRILL | |||||
|
Drill | 4 | 0.25 | 2.00 | 0.00 | 0.25 | 2.50 | 3.00 | 1069 | 4.28 | 0.00 | 118.00 | 00:00:14 | -1.08 | 0.10 | 1/4 DRILL | |||||
|
Drill | 5 | 0.50 | 2.00 | 0.00 | 0.50 | 2.50 | 3.00 | 534 | 4.28 | 0.00 | 118.00 | 00:00:10 | -1.15 | 0.10 | 1/2 DRILL | |||||
|
Chamfer Mill | 6 | 0.25 | 1.00 | 0.00 | 0.50 | 1.20 | 2.00 | 0 | 0.00 | 0.00 | 45.00 | 00:01:05 | -0.02 | 0.25 | 1/4 CHAMFER MILL |
(TList V4.1 © 2009 GMCCS)