session {9/9 2:12:27pm > rayt opened job C:/ProgramData/Stratasys/FDMControlCenter/14.8/jobs/rayt361ee69c26b60bc479be70dc/Default.sjb.  Insight 14.8 (1619).}
msg {2:12:28pm > Read 12692 facets in 0:00 from "X:/ESP/G3-ESP/Solidworks files/Turbine/ESP RP/FlowerPotSubconnLock.STL"}
msg {2:12:28pm > STL comment: solid FlowerPotSubconnLock}
msg {2:12:28pm > Bounding box of this STL X, Y, Z:}
msg {2:12:28pm >       min = (0.0000, 0.7588, 0.0000)}
msg {2:12:28pm >       max = (10.2943, 4.8962, 1.5249)}
msg {2:12:28pm > Done loading STL file after 1 sec.}
msg {2:12:38pm > 	Slice height:	0.0050}
msg {2:12:38pm > Curves too small to build will be removed}
msg {2:12:38pm > Done slicing.}
msg {2:12:38pm > Supports removed}
msg {2:12:38pm > 	Support style:	Sparse}
msg {2:12:39pm > Inspecting part curves}
msg {2:12:39pm > Generating supports}
msg {2:12:43pm > Done generating supports after 4 sec.}
msg {2:12:43pm > Num base 8 layers. Max height }
msg {2:12:43pm > Done writing boundary curves.}
msg {2:12:43pm > Saved job:  X:/ESP/G3-ESP/Solidworks files/Turbine/ESP RP/ssys_FlowerPotSubconnLock/FlowerPotSubconnLock.sjb}
msg {2:12:43pm > 	Part fill style:	One contour /  rasters}
msg {2:12:43pm > 	Part interior style:	Solid}
msg {2:12:43pm > 	Contour width:	0.0120}
msg {2:12:43pm > 	Part raster width:	0.0120}
msg {2:12:48pm > Done generating toolpaths after 4 sec.}
msg {2:12:48pm > CMB moved to envelope center.}
msg {2:12:52pm > Toolpath Information}
msg {2:12:52pm > 	Est. build time:	18 hr 58 min }
msg {2:12:52pm > 	Model material:	9.385 in³}
msg {2:12:52pm > 	Support material:	2.456 in³}
msg {2:12:52pm > Done writing CMB file after 4 sec.}
msg {2:12:52pm > Job Summary}
msg {2:12:52pm > 	Full job path:	X:/ESP/G3-ESP/Solidworks files/Turbine/ESP RP/ssys_FlowerPotSubconnLock/FlowerPotSubconnLock.sjb}
msg {2:12:52pm > 	Toolpath file name:	FlowerPotSubconnLock.cmb}
msg {2:12:52pm > 	Modeler:		Fortus 400mc Large}
msg {2:12:52pm > 	Est. build time:	18 hr 58 min }
msg {2:12:52pm > 	Model material:	9.385 in³,	T10,	ABS-M30}
msg {2:12:52pm > 	Support material:	2.456 in³,	T12,	SR30 support}
msg {2:12:52pm > 	Slice height:	0.0050}
msg {2:12:52pm > 	Part fill style:	One contour /  rasters}
msg {2:12:52pm > 	Part interior style:	Solid}
msg {2:12:52pm > 	Visible surface style:	Normal}
msg {2:12:52pm > 	Support style:	Sparse}
msg {2:12:52pm > 	Contour width:	0.0200}
msg {2:12:52pm > 	Number of contours (total):	2}
msg {2:12:52pm > 	Part interior contours:	0.0120}
msg {2:12:52pm > 	Part raster width:	0.0120}
msg {2:12:52pm > 	Application:	Insight 14.8, Build version: 1619}
msg {2:12:52pm > Saved job:  X:/ESP/G3-ESP/Solidworks files/Turbine/ESP RP/ssys_FlowerPotSubconnLock/FlowerPotSubconnLock.sjb,  approximate build time 18 hr 58 min }
msg {2:13:28pm > Saved job:  X:/ESP/G3-ESP/Solidworks files/Turbine/ESP RP/ssys_FlowerPotSubconnLock/FlowerPotSubconnLock.sjb}
session {9/9 2:22:32pm > rayt closed job.}