session {5/2 11:08:49am > rayt opened job C:/ProgramData/Stratasys/FDMControlCenter/10.6/jobs/rayt4/Default.sjb.  Insight 10.6 (4739).}
msg {11:08:50am > Read 59726 facets in 0:00 from "X:/ESP/G3-ESP/Solidworks files/Turbine/ESP RP/SnakeWireHeadPart1.STL"}
msg {11:08:50am > STL comment: solid SnakeWireHeadPart1}
msg {11:08:50am > 6 free surface edges left in model (object is not closed).}
msg {11:08:50am > Bounding box of this STL X, Y, Z:}
msg {11:08:50am >       min = (0.0000, 0.0000, 0.6913)}
msg {11:08:50am >       max = (1.5000, 1.3000, 1.3750)}
msg {11:08:50am > Done loading STL file after 1 sec.}
msg {11:09:20am > 	Slice height:	0.0050}
msg {11:09:21am > Curves too small to build will be removed}
msg {11:09:21am > Done slicing.}
msg {11:09:21am > Supports removed}
msg {11:09:21am > 	Support style:	Sparse}
msg {11:09:21am > Inspecting part curves}
msg {11:09:21am > Generating supports}
msg {11:09:30am > Done generating supports after 8 sec.}
msg {11:09:31am > Done writing boundary curves.}
msg {11:09:31am > Saved job:  X:/ESP/G3-ESP/Solidworks files/Turbine/ESP RP/ssys_SnakeWireHeadPart1/SnakeWireHeadPart1.sjb}
msg {11:09:31am > 	Part fill style:	One contour /  rasters}
msg {11:09:31am > 	Part interior style:	Solid - normal}
msg {11:09:31am > 	Contour width:	0.0120}
msg {11:09:31am > 	Part raster width:	0.0120}
msg {11:09:34am > Done generating toolpaths after 2 sec.}
msg {11:09:34am > CMB moved to envelope center.}
msg {11:09:36am > Toolpath Information}
msg {11:09:36am > 	Est. build time:	2 hr 38 min }
msg {11:09:36am > 	Model material:	0.734 in³}
msg {11:09:36am > 	Support material:	0.476 in³}
msg {11:09:36am > Done writing CMB file after 1 sec.}
msg {11:09:36am > Job Summary}
msg {11:09:36am > 	Full job path:	X:/ESP/G3-ESP/Solidworks files/Turbine/ESP RP/ssys_SnakeWireHeadPart1/SnakeWireHeadPart1.sjb}
msg {11:09:36am > 	Toolpath file name:	SnakeWireHeadPart1.cmb}
msg {11:09:36am > 	Modeler:		Fortus 400mc Large}
msg {11:09:36am > 	Est. build time:	2 hr 38 min }
msg {11:09:36am > 	Model material:	0.734 in³,	T10,	ABS-M30}
msg {11:09:36am > 	Support material:	0.476 in³,	T12,	SR30 support}
msg {11:09:36am > 	Slice height:	0.0050}
msg {11:09:36am > 	Part fill style:	One contour /  rasters}
msg {11:09:36am > 	Part interior style:	Solid - normal}
msg {11:09:36am > 	Visible surface style:	Normal}
msg {11:09:36am > 	Support style:	Sparse}
msg {11:09:36am > 	Contour width:	0.0200}
msg {11:09:36am > 	Number of contours:	0.2500}
msg {11:09:36am > 	Part interior contours:	0.0120}
msg {11:09:36am > 	Part raster width:	0.0120}
msg {11:09:36am > 	Application:	Insight 10.6, Build version: 4739}
msg {11:09:36am > Saved job:  X:/ESP/G3-ESP/Solidworks files/Turbine/ESP RP/ssys_SnakeWireHeadPart1/SnakeWireHeadPart1.sjb,  approximate build time 2 hr 38 min }
session {5/2 2:01:55pm > rayt closed job.}