ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP203' ), '1' );
FILE_NAME ('P-201531-13_ESP-DOME-A1-DRAFT.STEP', '2014-07-29T22:37:33', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2014', '' );
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
ENDSEC;
DATA;
#2956 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #15229 ) ;
#3622 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #12782, 'distance_accuracy_value', 'NONE');
#4165 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
#4174 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #7350 ) ;
#4555 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #11776 ) ) ;
#5436 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#7350 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #11455, #12632 ) ;
#8570 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #12837 ) ;
#11455 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #11776, .NOT_KNOWN. ) ;
#11602 = MECHANICAL_CONTEXT ( 'NONE', #15229, 'mechanical' ) ;
#11776 = PRODUCT ( 'P-201531-13_ESP-DOME-A1-DRAFT', 'P-201531-13_ESP-DOME-A1-DRAFT', '', ( #11602 ) ) ;
#12095 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
#12632 = DESIGN_CONTEXT ( 'detailed design', #12837, 'design' ) ;
#12782 =( CONVERSION_BASED_UNIT ( 'INCH', #15000 ) LENGTH_UNIT ( ) NAMED_UNIT ( #12095 ) );
#12837 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
#14050 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#15000 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #4165 );
#15229 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
#15846 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #3622 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #12782, #5436, #14050 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
ENDSEC;
END-ISO-10303-21;