Project Name: FrameDisplay_537.dpj

Project Type:
    ADSP-BF533 [ ]
    ADSP-BF537 [X]
    ADSP-BF561 [ ]

Hardware Used:

    **************************************
    **************************************
    ***  PLEASE READ THE RELEASE NOTE  ***
    ***  FOR SPECIFIC HARDWARE AND     ***
    ***  SOFTWARE CONFIGURATIONS       ***
    ***  SUPPORTED BY THIS APPLICATION ***
    **************************************
    **************************************

    ADSP-BF537 EZ-KIT Lite
    Analog Devices VisualDSP++
    VisualDSP++ Emulator
    TV with NTSC/PAL AV input

System Services Components Used:
    DMA Manager                         [X]   Deferred Callback Manager   [ ]
    Interrupt Manager                   [X]   Timer Module                [ ]
    Power Management Module             [X]   Flag Module                 [ ]
    External Bus Interface Unit Module  [X]   Port Module                 [ ]

OVERVIEW
========
    This application shows how to use ADV7179 device driver to output video frame.


    ADV7179 hardware registers can be accessed through TWI and device access service

RUNNING THE APPLICATION
=======================

1. Hardware settings
--------------------

ADSP-BF537 EZ-KIT LITE SETTINGS
-------------------------------
SW1: 1-OFF 2-OFF 3-OFF 4-OFF 5-OFF 6-OFF 7-OFF 8-OFF
SW2: 1-OFF 2-OFF 3-OFF 4-OFF
SW3: 1-OFF 2-OFF 3-OFF 4-OFF
SW4: 1-OFF 2-OFF 3-OFF 4-OFF
SW5: 1-ON  2-ON  3-ON  4-ON 
SW6: 1-OFF 2-OFF 3-OFF 4-OFF
SW7: 1-ON  2-ON  3-ON  4-ON  5-ON  6-ON  7-ON  8-ON
SW8: 1-ON  2-ON  3-OFF 4-OFF 5-OFF 6-OFF
SW16 1

BLACKFIN A-V EZ-EXTENDER
------------------------
JP1: No Jumpers installed
JP2: No Jumpers installed
JP3: 5-7, 6-8
JP4: 1-2, 3-4 
JP5: 3-4
JP6: No Jumpers installed
JP7: No Jumpers installed
JP8: 1-3, 2-4, 7-8
JP9: 3-5
JP10: No Jumpers installed



2. External connections
-----------------------
		Connect a monitor to the A-V Extender card video-out connector. The video 
		connectors are the bank of 6 RCA-style jacks on the A-V Extender card labeled as J7.
		
         J7 +---------------------------------------------------+
            |          O          O < Video Out  O              |	        	
            |          O          O              O 		|
            +---------------------------------------------------+

3. Operational Description
--------------------------

- Open the "FrameDisplay_537.dpj" project in the VisualDSP Integrated Development
  Environment (IDDE).

- Select via #define in FrameDisplay.c the desired video input format e.g.
  //#define   PAL_FRAME (for NTSC - default)
  or
  #define   PAL_FRAME   (for PAL)

- Under the "Project" tab, select "Build Project" (program is then loaded automatically into DSP).

- Connect a video display monitor to the video output jack (top middle connector of J7)

- Run the executables by pressing "run" (F5) on the toolbar.