#CREATED ON 8/2/04 TO CLEAN OUT PARTICLES FROM SYRINGE BLOCK
PROGRAM: SH1BOIL
SYRINGE PULL 1.0 Lysis		# premix lysis/sample buffer
DELAYSEC 5
VALVEPORT Lysis HOME
SYRINGEJOG PULL 3.5		# rinse syringe
SYRINGE PUSH ALL ToxicWaste
SYRINGE PULL 1.5 M3Bypass
SYRINGE PUSH ALL ToxicWaste	# burp M1 loop
HEAT 46 15			# 6/18/04 cal
VALVEPORT Puck SET		# relieve vacuum/vent lower loop
DELAYSEC 2
VALVEPORT Air SET		# vent puck during preheat
DELAYMIN 4
SYRINGE PULL 2 Lysis
DELAYSEC 5
VALVEPORT Lysis HOME
SYRINGEJOG PULL 3.5		# syringe @ 5.5
DELAYSEC 2
SYRINGE PUSH 1.5 Puck
DELAYSEC 2
VALVEPORT Puck HOME		# leave syringe SET; others home
SYRINGEJOG PUSH 3.5		# leaves 0.5mL in syringe
DELAYSEC 7
SYRINGEJOG PULL 2		# syringe at 2.5
DELAYMIN 2
SYRINGEJOG PUSH 0.75
SYRINGEJOG PULL 0.75		# SWISh
DELAYMIN 2
SYRINGEJOG PUSH 0.75
SYRINGEJOG PULL 0.75		# SWISH
DELAYMIN 2			# heater power begins cycling
SYRINGEJOG PUSH 0.75
SYRINGEJOG PULL 0.75		# SWISH
DELAYMIN 2
SYRINGEJOG PUSH 0.75
SYRINGEJOG PULL 0.75		# SWISH
DELAYMIN 2
#SYRINGEJOG PUSH 0.75
#SYRINGEJOG PULL 0.75		# SWISH; syringe @ 2.75
#DELAYMIN 2			# heat turns off w/~1 min left
SYRINGEJOG PUSH 1.5		# Syringe @1
SYRINGE PUSH ALL ToxicWaste
DELAYSEC 3
VALVEPORT M1Bypass HOME
VALVEPORT Syringe HOME
SYRINGEJOG PULL 5.5		# draw vacuum; AT 5.5
DELAYSEC 10
SYRINGE PULL 1.5 Air		# suck lysate in syringe; AT 7
DELAYSEC 10
VALVEPORT M3Bypass SET		# syringe valve now SET
DELAYSEC 5
VALVEPORT M3Bypass HOME		# isolate lysate; syringe and air SET
SYRINGE PUSH ALL ToxicWaste
END