# 4/21/03 used 6-9-03
# Flush Process for new valve manifold
# Begins after filter puck is unloaded
# Assumes syringe homed
# ** For embedded unit NOT under pressure
# samll vol flush between SH trials
# do not push all for sample and waste ports or you get air bubbles!
# leaves all valves HOME 
PROGRAM: SFL
SHUTTLE FLUSH       		# begin flush sequence
FILTERCLAMP CLOSE 185000	# for steel flush puck
SYRINGE PULL 8 SPflush
DELAYSEC 5
SYRINGE PUSH 7 Sample		# flush sample port
VALVEPORT Sample HOME
SYRINGE PULL 7.5 SPflush
DELAYSEC 5
SYRINGE PUSH 8 Waste		# flush exhaust
VALVEPORT Exhaust HOME
SYRINGE PUSH ALL ToxicWaste 
SYRINGE PULL 5 FlushM2		# distilled water with 0.01% IGEPAL
DELAYSEC 15
VALVEPORT FlushM2 HOME
SYRINGEJOG PULL 5
DELAYSEC 15		# clear manifold 2 of flush
SYRINGE PUSH ALL Puck		# ck that all liquid is cleared
VALVEPORT Puck HOME
SYRINGE PULL 10 FlushM1		# distilled water with 0.01% IGEPAL
DELAYSEC 10
VALVEPORT FlushM1 HOME
SYRINGEJOG PULL 3.5		# clear manifold 1 of flush
DELAYSEC 10
SYRINGE PUSH ALL ToxicWaste	# ck that all liquid is cleared
VALVEPORT ToxicWaste HOME
VALVEPORT M1Bypass HOME
VALVEPORT Syringe HOME
FILTERCLAMP OPEN
SHUTTLE LOAD
END