# macro for creating sample lysate for sand hybe rxn used 6-9-03
# in situ ESP Delta unit - new valve manifold
# lysis solun. pushed in from top; pressure push mix
# rev 038 April 21 2003; mod 4/24 based on run notes
# modified from rev 005/036
# the 5xSET rinse is with 0.005% IGEPAL 
# ~2 ml lysate
# heating time 14 min
# run time is ~26min
PROGRAM: SSH1
#SYRINGE PULL 5 Sample		# prime puck
#DELAYSEC 10
#SYRINGE PUSH ALL Waste
#SYRINGE PULL 22.5 Sample
#DELAYSEC 10
#VALVEPORT Sample HOME
#SYRINGE PUSH ALL Waste
#VALVEPORT Exhaust HOME          #Done sampling
SYRINGE PULL 4.0 SETrinse 	# 5x SET with 0.005% IGEPAL
DELAYSEC 5
VALVEPORT SETrinse HOME
SYRINGEJOG PULL 4		# clear manifold
SYRINGE PUSH 7 Puck		# clear syringe block mnfld
DELAYSEC 10
VALVEPORT Puck HOME
VALVEPORT Syringe HOME
SYRINGEJOG PULL 7
DELAYSEC 10
SYRINGE PULL 3.0 Air
DELAYSEC 10
VALVEPORT M3Bypass SET		# relieve vacuum in syringe
DELAYSEC 5
SYRINGE PUSH ALL ToxicWaste
SYRINGE PULL 5 Air		# 2nd draw of air to dry out puck
DELAYSEC 10
VALVEPORT M3Bypass SET		# relieve vacuum in syringe
DELAYSEC 5
SYRINGE PUSH ALL ToxicWaste
SYRINGE PULL 1.0 Lysis		# premix lysis/sample buffer
DELAYSEC 5
VALVEPORT Lysis HOME
SYRINGEJOG PULL 3.5		# rinse syringe
SYRINGE PUSH ALL ToxicWaste
SYRINGE PULL 1.5 M3Bypass
SYRINGE PUSH ALL ToxicWaste	# burp M1 loop
SYRINGE PULL 2.25 Lysis		# incl comp for backlash
DELAYSEC 30                     # increase from 5 to 30 sec
VALVEPORT Lysis HOME
SYRINGEJOG PULL 4.5		# should leave 2ml in syringe
END