HR: 10:20h
AN: C31D-01 INVITED     [PDF]
TI: Geoscience Laser Altimeter System (GLAS) on the ICESat Mission: Initial Science Measurement Performance
AU: * Abshire, J B
EM: James.B.Abshire@nasa.gov
AF: NASA- Goddard Space Flight center, Laboratory for Terrestrial Physics, Mail Code 920, Greenbelt, MD 20771 United States
AU: Sun, X
EM: Xiaoli.Sun@gsfc.nasa.gov
AF: NASA- Goddard Space Flight center, Laboratory for Terrestrial Physics, Mail Code 920, Greenbelt, MD 20771 United States
AU: Riris, H
EM: Haris.Riris@gsfc.nasa.gov
AF: Sigma Research and Engineering, c/o NASA Goddard Space Flight Center Mail Code 924, Greenbelt, MD 20771 United States
AU: Sirota, M
EM: Marcos.Sirota@gsfc.nasa.gov
AF: Sigma Research and Engineering, c/o NASA Goddard Space Flight Center Mail Code 924, Greenbelt, MD 20771 United States
AU: McGarry, J
EM: Jan.McGarry@gsfc.nasa.gov
AF: NASA- Goddard Space Flight center, Laboratory for Terrestrial Physics, Mail Code 920, Greenbelt, MD 20771 United States
AU: Palm, S
EM: Steve.Palm@gsfc.nasa.gov
AF: Science Systems And Applications Inc., c/o NASA Goddard Space Flight Center Mail Code 912, Greenbelt, MD 20771 United States
AB: The Geoscience Laser Altimeter System is the space lidar on the NASA ICESat mision. Its design combines an altimeter with 5 cm precision with a laser pointing angle determination system and a dual wavelength cloud and aerosol lidar. GLAS measures the range to the Earth's surface with 1064 nm laser pulses. Each laser pulse produces a precision pointing measurement from the stellar reference system (SRS) and an echo pulse waveform, which permits range determination and waveform spreading analysis. The single shot ranging accuracy is $< 10$ cm for ice surfaces with slopes $< 2$ degrees. GLAS also measures atmospheric backscatter profiles at both 1064 and 532 nm. The 1064 nm measurements use an analog Si APD detector and measure the height and profile the backscatter signal from thicker clouds. The measurements at 532 nm use photon counting detectors, and will measure the vertical height distributions of optically thin clouds and aerosol layers Before launch, the measurement performance of GLAS was evaluated using a lidar test instrument called the Bench Check Equipment (BCE). The BCE was developed in parallel with GLAS and served as an inverse altimeter, inverse lidar and a stellar source simulator. It was used to simulate the range of expected optical inputs to the GLAS receiver by illuminating its telescope with simulated background light as well as laser echoes with known powers, energy levels, widths and delay times. The BCE also allowed monitoring of the transmitted laser energy, the angle measurements of the SRS, the co-alignment of the transmitted laser beam to the receiver line of sight, and performance of the flight science algorithms. Performance was evaluated during the GLAS development, before and after environmental tests, and after delivery to the spacecraft. The ICESat observatory was launched into a 94 degree inclination, 590 km altitude circular polar orbit on January 12, 2003. Beginning in early February, GLAS was powered on tested in stages. Its 1064 nm optical receiver was evaluated in a several tests using both solar background light and an internal test source. Laser 1 was activated on February 20, 2003. GLAS operated with Laser 1 for 38 continuous days on orbit using its 1064 nm receiver channel, producing over 130 million individual laser measurements of the Earth's surface and atmosphere. These nadir-pointed measurements fell along the ICESat's ground track, and spanned more than 4 cycles of the initial 8-day ICESat repeat orbit. The initial GLAS measurement set shows strong echo pulses from ranging to the surface topography, oceans, ice sheets and cloud tops, as well as profiles of clouds and aerosols. The GLAS measurements have unprecedented vertical and angular resolution, and show nearly continuous height profiles of ice, land and ocean surfaces or cloud tops, as well profiles of backscatter from thin clouds and aerosol layers. Examples of these GLAS measurements and an initial assessment of its science measurement performance will be presented.
DE: 0394 Instruments and techniques
DE: 1640 Remote sensing
DE: 1827 Glaciology (1863)
SC: Cryosphere [C]
MN: 2003 Fall Meeting