HR: 0800h
AN: A51A-0031    [Abstracts]
TI: Light- and Heavy-Duty Vehicle Emission Factors of PM Species Based on Freeway Measurements and Comparison With Tunnel and Dynamometer Studies
AU: * Ning, Z
EM: ning@usc.edu
AF: University of Southern California, Department of Civil and Environmental Engineering, 3620 South Vermont Avenue, Los Angeles, CA 90089, United States
AU: Polidori, A
EM: polidori@usc.edu
AF: University of Southern California, Department of Civil and Environmental Engineering, 3620 South Vermont Avenue, Los Angeles, CA 90089, United States
AU: Schauer, J J
EM: jjschauer@wisc.edu
AF: University of Wisconsin Madison, Civil and Environmental Engineering Department, 660 N. Park St., Madison, WI 53706, United States
AU: Sioutas, C
EM: sioutas@usc.edu
AF: University of Southern California, Department of Civil and Environmental Engineering, 3620 South Vermont Avenue, Los Angeles, CA 90089, United States
AB: Emission factors of various particle species from light- and heavy-duty vehicles (LDVs and HDVs, respectively), including organic and elemental carbon (OC and EC), sulfate, polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes, trace metals, elements, and particle number (PN), were estimated based on roadway measurements. Sampling campaigns were conducted at two different roadways: the CA-110 highway (where only gasoline-powered vehicles are allowed), and the I-710 freeway (where about 20 % of the total number of vehicles are diesel-powered trucks). The PM emission factors determined in these roadways were compared to those reconstructed from recent source emission data from the Caldecott tunnel, and those from previous tunnel and chassis dynamometer studies. Very good agreement between estimated and reconstructed emission factors was found for PN, EC, sulfate, high molecular weight (MW) PAHs, hopanes and steranes. This suggests that PM speciated chemical data collected at roadsides can be used to calculate reliable emission factors for several important particulate species at other locations characterized by a similar mix of on-road motor vehicles. The agreement between our results and other studies in the emission factors of trace elements and metals varied from very good (for species such as Cu, Mo, Ba, Pb) to poor (for species such as Mg, Fe, Ca) probably because the atmospheric concentrations of the latter elements are associated with both traffic and non-traffic sources, and the relative abundances of Mg, Ca, and Fe in road dust varies considerably across locations. The emission factors of OC and EC were clearly highest for HDVs, and those of PAHs, hopanes, and steranes from our roadway measurements were well within the range of values reported in the literature from tunnel and dynamometer studies. The approach presented in this study allows for a straightforward estimation of PM emission factors from ambient, near-freeway measurements. Our results were generally in very good agreement with those in the available literature for most non-labile PM species.
DE: 0305 Aerosols and particles (0345, 4801, 4906)
DE: 0345 Pollution: urban and regional (0305, 0478, 4251)
SC: Atmospheric Sciences [A]
MN: 2007 Fall Meeting