|
|
![]() |
Micro-SeaCam 1001 |
|
|
![]() | |
Because of its small size and high performance, the Micro-SeaCam 1001 is suitable for applications where other cameras can't fit. Diver's helmets, ROV manipulator wrists, and ROV tether management systems are but a few of the places this camera can be used.
CAMERA Image Sensor: 1/2-inch CCD sensor Resolution: 550 (H) x 350 (V) lines Pixels: 768 (H) x 494 (V) Minimum Illumination: 0.5 Lux at f1.4 Lens: f3.5 fixed iris, fixed focus Angle of View in Water: 58 deg. (H) x 49 deg. (V) x 69 deg. (D) Video Format: EIA, CCIR MECHANICAL Housing Material: Tiodized titanium Port Material: Sapphire Outer Diameter: 3.6 cm (1.4 in.) Overall Length: 12.2 cm (4.8 in.) without connector Weight in Air: 298 g (10.5 oz.) Weight in Water: 170 g (6.0 oz.) ENVIRONMENTAL Depth: 2,000 meters (6,500 feet) standard 6,000 meters (20,000 feet) option available ELECTRICAL Power: 12 volts DC Current: 140 mA Pin-Out (standard): 1=Ground, 2=Power, 3=Video, 4=No connection Connector: Subconn-type BH4MP or LPBH4MP (right angle), call for others Cable: RG59/U triax (ground, 12 VDC, video)
![]() |
Specifications subject to change without notice.
Rev. 01/06/00 |