SeaLaser 100
- SMALL, LIGHTWEIGHT & LOW COST
- 5 mW 670 nm & 7mW 635 nm
- BEAM IS PRECISELY ALIGNED TO HOUSING BARREL
- ENSURES CAMERA OR LIGHT ALIGNMENT; ALLOWS OBJECT SCALING USING PAIR
|
|
|
SeaLaser 100 |
|
|
| |
The 5 mW low cost unit is recommended for close-up applications out to about 1-meter range, whereas the7 mW high power 635nm unit is good to 5-8 meters range. The shorter 635nm wavelength penetrates water much better than does the near IR 670nm low cost laser. The beam sharp focus distance is a standard factory-set 1 meter.
An internal power regulation board allows operation to 24 volts DC and protects the laser diode from most voltage transients, and is internally fused. This is important for applications using long cables or those that might have switching transients. It has a scratch resistant SAR optical port.
NOTE: The usable range is a function of ambient light levels, water conditions, and camera sensitivity.
MECHANICAL Housing Material: Acetal plastic (Delrin) Port: SAR Acrylic Length: 15.24 cm (6.0 in.) excluding connector Diameter: 3.0 cm (1.2 in.) Weight in Air: 227 g laser only, 300 g with bracket Weight in Water: 67 g laser only, 140 g with bracket Other: Mounting bracket included LASER Type: Semi-conductor laser diode Class III-A (670 nm) Semi-conductor laser diode Class III-B (635 nm) Beam Diameter: 1.8 mm x 0.5 mm Wavelength: 635 nm (15 mW) and 670 nm (5 mW) Beam Divergence: 0.09 mRadians x 0.19 mRadians Power: 5 mW (670 nm) and 15 mW (635 nm) Beam Alignment: Beam runout 5 cm at 10 meters max. ELECTRICAL Voltage: 5-24 VDC Connector: BH2M standard, others available ENVIRONMENTAL Depth: 2,000 meters (6,500 feet) OTHER Option: Beam focus distance
 |
Specifications subject to change without notice.
Rev. 01/06/00 |
