R Current RTC: Saturday 1/1/2000 0:2:30 -------------------------------------------------- BitsyXb Boot Loader Debug Menu -------------------------------------------------- (A) Read memory (B) Write memory (C) TOC for resident NK image (D) Disk directory for PC card (E) Erase FLASH memory (G) GPIO Control and Status (H) Hardware table definitions (O) Set options for this board (P) PC card detection & power (R) Get RTC info (S) Set RTC info (T) Toggle boot menu time-out (1) Load NK.BIN from PC card (2) Load NK.BIN over Ethernet (3) Load NK.BIN from SD card (X) Exit -------------------------------------------------- > R Current RTC: Saturday 1/1/2000 0:3:2 -------------------------------------------------- BitsyXb Boot Loader Debug Menu -------------------------------------------------- (A) Read memory (B) Write memory (C) TOC for resident NK image (D) Disk directory for PC card (E) Erase FLASH memory (G) GPIO Control and Status (H) Hardware table definitions (O) Set options for this board (P) PC card detection & power (R) Get RTC info (S) Set RTC info (T) Toggle boot menu time-out (1) Load NK.BIN from PC card (2) Load NK.BIN over Ethernet (3) Load NK.BIN from SD card (X) Exit -------------------------------------------------- > E FLASH is 32MB and Address from 0x00040000 to 0x01FFFFFF Enter range to erase: (Hex Address 0x) Start = 0x000400   80000 End = 0x000c0000     C0000 The address range you selected to erase is: 0xB0080000 - 0xB00FFFFF WARNING! Erasing Start address 0xB0080000 will delete the Persistent Registry Settings. Continue? > N FLASH erase aborted. -------------------------------------------------- BitsyXb Boot Loader Debug Menu -------------------------------------------------- (A) Read memory (B) Write memory (C) TOC for resident NK image (D) Disk directory for PC card (E) Erase FLASH memory (G) GPIO Control and Status (H) Hardware table definitions (O) Set options for this board (P) PC card detection & power (R) Get RTC info (S) Set RTC info (T) Toggle boot menu time-out (1) Load NK.BIN from PC card (2) Load NK.BIN over Ethernet (3) Load NK.BIN from SD card (X) Exit -------------------------------------------------- > Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Feb 12 2008 16:19:55 Unlocking FLASH blocks. INFO: LoadEBootCFG: Using default configuration for all blocks Resetting factory default configuration... Resetting MemCfg oconfiguration... Splash Display ADSLOAD.BMP. ADSLOAD.BMP File Format OK. BitsPerPixel is 16. Display Module is the default inside CPU. Copyright (c) 2002-2008 Applied Data Systems Inc. ================================================ BitsyXb Platform - Bootloader ------------------------------------------------ * Version 2.11 * SDRAM: 64 MB * Flash: 32 MB * Type: Retail * Built on Feb 12 2008 at 16:25:06 * CPLD Rev: 6 * DIP SW: 1=on, 2=off * Boot Option: OPEN BOX UPGRADE * Processor clock (turbo): 512 MHz ================================================== System ready! Preparing for download... PC Cards Inserted: 0 - ATA disk NOT found. -------------------------------------------------- BitsyXb Boot Loader Debug Menu -------------------------------------------------- (A) Read memory (B) Write memory (C) TOC for resident NK image (D) Disk directory for PC card (E) Erase FLASH memory (G) GPIO Control and Status (H) Hardware table definitions (O) Set options for this board (P) PC card detection & power (R) Get RTC info (S) Set RTC info (T) Toggle boot menu time-out (1) Load NK.BIN from PC card (2) Load NK.BIN over Ethernet (3) Load NK.BIN from SD card (X) Exit -------------------------------------------------- > E FLASH is 32MB and Address from 0x00040000 to 0x01FFFFFF Enter range to erase: (Hex Address 0x) Start = 0x00040000 End = 0x00080000 The address range you selected to erase is: 0xB0040000 - 0xB00BFFFF WARNING! Erasing Start address 0xB0040000 will delete the ADSLOAD.BMP. Continue? > þÿÿÿþð Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Feb 12 2008 16:19:55 Unlocking FLASH blocks. INFO: LoadEBootCFG: Using default configuration for all blocks Resetting factory default configuration... Resetting MemCfg oconfiguration... Splash Display ADSLOAD.BMP. ADSLOAD.BMP File Format OK. BitsPerPixel is 16. Display Module is the default inside CPU. Copyright (c) 2002-2008 Applied Data Systems Inc. ================================================ BitsyXb Platform - Bootloader ------------------------------------------------ * Version 2.11 * SDRAM: 64 MB * Flash: 32 MB * Type: Retail * Built on Feb 12 2008 at 16:25:06 * CPLD Rev: 6 * DIP SW: 1=off, 2=off * Boot Option: SEALED BOX UPGRADE * Processor clock (turbo): 512 MHz ================================================== System ready! Preparing for download... PC Cards Inserted: 1 - ATA disk found. AtaDeviceIndex is 0 Found resident NK image in FLASH: - Copying to RAM... Done. Jumping to image at 0xA0200000(P):0x80200000(V)... Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00 ProcessorType=0411 Revision=7 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80207a54 System DRAM (MB) - Total:64 Extension:None Sp=ffffc7cc Datalight FlashFX Pro v1.11 Build 856 Copyright (c) 1993-2004 Datalight, Inc. Patents: US#5860082, US#6260156. FFX: B1A00000 = CreateStaticMapping( 01A00000, 00600000 ) FlashFX SDK License ID #5B2C08D8 Created Thread 23C3EFD6 Datalight Reliance v1.13.0337 Copyright (c) 2003 - 2005 Datalight, Inc. Registered to #6A48B493 Initializing Debug Log Driver... Failed Initializing FLASH Driver... FSHDRV: B0000000 = CreateStaticMapping( 0, 2000000 ) MfgCode 890089 ok Initializing ADSLOAD.REG Parsing driver... FAILED (0) Initializing POWER Driver... ok Initializing Ethernet Driver... Detected Ethernet(SMC91C111) Ok OID_PNP_CAPABILITIES Statistics Query OID_PNP_CAPABILITIES Statistics Query Initializing SMARTIO Driver... SMARTIO Detected : PartType=0x8535 Firmware=0x0010 Revision=6 SMARTIO : SerialClockRate=10 KBits/S(0xa7). ok Initializing Serial(driver version support IR)... UART0 ok. (107ms) Initializing Serial(driver version support IR)... UART2 ok. (107ms) Initializing Serial(driver version support IR)... UART1 oInitializing USB HCD... Ok Initializing USB Client... Ok Initializing I2C driver v 1.1...ok (1ms) USB HCD wakeUpThread: Read Registry setting error, use default value. Initializing Digital I/O Driver v. 2.2...ok (5ms) Initializing WAV device... Ok Initializing SDHC Driver... Ok Initializing PXA25x Display Driver (v1.2)... Ok (364ms) Initializing Touch Panel driver v 1.6... Ok (6ms) Microsoft Windows CE Ver. 5.0 (build 0) Windows CE Ver.(5.00.36 BX270_Pro_HIVE) Bootloader Version 2.11 ADSLOAD.HWT Version 0x00000000 ADSLOAD.REG Version Not Available CPLD Version 6 AVR Version 10 6 FlashFX Disk Size (5MB) OK Platform Type : PXA27x ~ÿþþ