lpd_smsc_lan911x readme.txt ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ lpd_smsc_lan911x is an Network driver for the SMSC LAN911x Ethernet family. This driver is supported under Logic Product Development's LoCE BSP v2.3.0+ By using this driver, you agree to Logic Product Development's WinCE BSP EULA. If you did not receive a copy of the EULA with this driver, please email product.sales@logicpd.com or contact Logic Product Development at: Logic Product Development Attn: Logic Product Sales 411 North Washington Avenue Suite101 Minneapolis, MN U.S.A. 55401 _____________________________________________________________________________ _______________ ToC ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ 1 Release Notes 2 What's New 3 Known Issues 4 Dependencies - Change Log _______________ Please see the LoCE BSP Users Guide for general installation instructions. 1) Release Notes ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ --) This is a production release binary supporting the iMX31-LV SOM. --) The SMSC9117 chip does not have power states directly mapping to NDIS D0-D3. The driver sets them up to map as follows: NDIS D0 --> SMSC9117 D0 state ("normal operation" - everything is on) NDIS D1 --> SMSC9117 D1 state ("packet detect" - mac/host interface off) NDIS D2 --> SMSC9117 D2 state ("energy detect" - wakes up when cable connected) NDIS D3 --> SMSC9117 D2 state ("full off" - only wakes up when BYTE_TEST written to) 2) What's New ŻŻŻŻŻŻŻŻŻŻŻŻŻ --) First Production release --) Power state transition issues fixed. --) Lock-up issue when transitioning Dx -> D0 power state fixed. 3) Known Issues ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ --) N/A 4) Dependencies ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ --) Kernel release v2.1.9.0 or later _____________________________________________________________________________ Change Log: ŻŻŻŻŻŻŻŻŻŻŻ --) v1.0.0 ŻŻŻŻŻŻ + First Production release ! Fixes power state transition issues. ! Fixes lock-up issue when transitioning Dx -> D0 power state --) v0.6.0 ŻŻŻŻŻŻ + Added power management. ! Fixed telnet connection issues. --) v0.5.0 ŻŻŻŻŻŻ ! Fixes connection issues to 10Mb/sec networks. --) v0.4.0 ŻŻŻŻŻŻ ! Fixes past-boot cable plugin lock-up issue. --) v0.3.0 ŻŻŻŻŻŻ ! Fixes compatibility issue with kernel release 2.1.9.0 beta 4 --) v0.2.0 ŻŻŻŻŻŻ ! Fixes lock-up issue if/when network cable is unplugged. --) v0.1.0 ŻŻŻŻŻŻ + Initial Release + Supports IMX31-10 SOM + Supports Windows CE 5.0 _____________________________________________________________________________ Copyright (c) 2006-2008 Logic Product Development http://www.logicpd.com/