-- ============================================ -- TITLE -- ============================================ -- Harris Corporation, Microwave Communications Division -- TRuepoint SNMP MIB version 4.1.2 -- Part Number 501-112948-019 -- -- This MIB is compatible with the firmware v.4.1.2 -- -- Development Date 2003-01-10 -- Author : Harris MCD -- -- -- ========= -- REVISIONS -- ========= -- Date Author Description -- ==== ====== =========== -- 2003-01-01 IY First edition. -- ============================================ -- Integrated System's MIB Compiler EXTENTIONS -- ============================================ TRuepoint-MIB -- default keywords -- Exclude -- ============================================ DEFINITIONS ::= BEGIN IMPORTS -- Counter, Gauge, TimeTicks FROM RFC1155 OBJECT-TYPE FROM RFC1212 DisplayString FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215; -- org OBJECT IDENTIFIER ::= { iso 3 } dod OBJECT IDENTIFIER ::= { org 6 } internet OBJECT IDENTIFIER ::= { dod 1 } private OBJECT IDENTIFIER ::= { internet 4 } enterprises OBJECT IDENTIFIER ::= { private 1 } -- harris OBJECT IDENTIFIER ::= { enterprises 290 } mcd OBJECT IDENTIFIER ::= { harris 3 } rtp OBJECT IDENTIFIER ::= { mcd 6 } truepoint-MIB OBJECT IDENTIFIER ::= { rtp 98 } system OBJECT IDENTIFIER ::= { truepoint-MIB 1 } tributary OBJECT IDENTIFIER ::= { truepoint-MIB 2 } radio OBJECT IDENTIFIER ::= { truepoint-MIB 3 } wayside OBJECT IDENTIFIER ::= { truepoint-MIB 4 } performance OBJECT IDENTIFIER ::= { truepoint-MIB 5 } net OBJECT IDENTIFIER ::= { truepoint-MIB 6 } inventory OBJECT IDENTIFIER ::= { truepoint-MIB 7 } alarm OBJECT IDENTIFIER ::= { truepoint-MIB 9 } -- -- system group -- systemNEaddress OBJECT-TYPE SYNTAX INTEGER(1..999) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the Network Element (NE) address used by FarScan to address the NE. It is a 3-digit number which should be unique to each radio in the network." ::= { system 1 } systemProtection OBJECT-TYPE SYNTAX INTEGER { unprotected(0), unprotected-2(1), mhsb(2), fd(3), sd(4), fd-sd(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the protection scheme used by the NE if any. The possible values for this variable are: unprotected: unprotected; unprotected-2: 2+0 unprotected scheme; mhsb: monitor hot standby protection scheme; fd: frequency diversity protection scheme; sd: frequency space diversity protection scheme; fd-sd: frequency diversity mounted as a space diversity protection scheme (hybrid diversity); Caution: change this on the farthest NE in the link first, since the change may break the link. The resulting loss of contact means that you may not receive the normal confirmation message from the far end." ::= { system 2 } systemMuxProtection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unprotected(0), protected(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the protection scheme of the multiplexer. This objects available only for protected configurations MHSB, FD, SD and FD/SD." ::= { system 3 } systemCapability OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), cap2E1(0), cap4E1(1), cap8E1(2), cap16E1(4), cap21E-E1 (6), cap4DS1(9), cap8DS1(10), cap12DS1(11), cap16DS1(12), cap28DS1-DS1 (26), capOC3-STM1(16), capPartiallyFilledSTM1(28), cap3DS3-3DS1(18), capDS3-E3-WS(19), cap100BT-WS(22), cap8DS1ADM-WS(30), mixSTM1(37), mix116DS1(48) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the capability of currently used Mux. For instance, it may be 2E1, 4E1, 8E1, 16E1, 21E+E1, 4T1, 8T1, 12T1, 16T1, 28DS1+DS1, OC3/STM1, Partially Filled STM1, 3DS3+3DS1, DS3/E3+WS, 100BT+WS, 8DS1ADM+WS, 16E1+2x10-100BT, 16T1+2x10-100BT." ::= { system 4 } systemUsedCapacity OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), cap2E1(0), cap4E1(1), cap8E1(2), cap16E1(4), cap21E1-E1(6), cap4DS1(9), cap8DS1(10), cap12DS1(11), cap16DS1(12), cap28DS1 (25), cap28DS1-DS1 (26), capOC3-STS3(16), capSTM1(27), capPartiallyFilledSTM1(28), cap3DS3-3DS1 (18), capE3-E1(19), capDS3-DS1(20), capDS3(21), cap100BT-E1(22), cap100BT-DS1(23), cap100BT(24), cap8DS1ADM(29), cap8DS1ADM-DS1(30), mix2E1 (31), mix4E1 (32), mix8E1 (33), mix16E1 (34), mix2E3 (35), mix2STM0 (36), mixSTM1 (37), mix100BT-4E1 (38), mix4DS1 (40), mix8DS1 (41), mix12DS1 (42), mix16DS1 (43), mix29DS1 (44), mix58DS1 (45), mix87DS1 (46), mix100DS1 (47), mix116DS1 (48), mix100BT-4DS1 (49) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the capacity configured for use on the radio. The used capacity may not be greater than the system capability. A list of available capacities can be retrieved from the object 'systemAvailableUsedCapacityList'." ::= { system 5 } systemBandwidth OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unknown(0), b2500KHz(25), b3500KHz(35), b3750KHz(38), b5000KHz(50), b7000KHz(70), b7500KHz(75), b10000KHz(100), b11660KHz(117), b12500KHz(125), b13750KHz(138), b14000KHz(140), b15000KHz(150), b18750KHz(188), b20000KHz(200), b27000KHz(270), b27500KHz(275), b28000KHz(280), b29650KHz(297), b30000KHz(300), b40000KHz(400), b50000KHz(500), b55000KHz(550), b56000KHz(560) } ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the bandwidth value of the RF link." ::= { system 6 } systemModulation OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unknown(0), qpsk(1), qam-16(2), qam-32(3), qam-64(4), qam-128(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the modulation scheme of the RF link." ::= { system 7 } systemRcsMode OBJECT-TYPE SYNTAX INTEGER { disable (1), simple (2), smart (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes RCS mode. It may be set to DISABLE to exclude RCS state machine from switching algorithm. It may be set to SIMPLE to include RCS state machine into switching algorithm. It may be set to SMART to include part of RCS state machine into switching algorithm. " ::= { system 10 } systemRcsDelay OBJECT-TYPE SYNTAX INTEGER { zero-sec (0), two-sec (2), four-sec (4), six-sec (6), eight-sec (8), ten-sec (10), twelve-sec (12), fourteen-sec (14), sixteen-sec (16), eightteen-sec (18), twenty-sec (20) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes RCS delay. It may be set to even value between 0 and 20 sec. The object available only in MHSB or SD protection scheme. Default value is 0 sec." ::= { system 11 } systemTribDfmThreshold OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This object describes Tributary Output Failure Protection threshold. The object available if System protection is MHSB/FD/SD/HD and MUX is protected and System Capability is NxDS1/NxE1." ::= { system 12 } systemRfuFrequencyBand OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unknown (0), lower6GHz-1 (1), lower6GHz-2 (2), upper6GHz (3), b7GHz (4), b8GHz (5), b10GHz (6), b11GHz (7), b13GHz (8), b14GHz (9), b15GHz (10), b18GHz (11), b23GHz (12), b26GHz (13), b28GHz (14), b31GHz (15), b32GHz (16), b38GHz (17) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the RFU frequency band value." ::= { system 15 } systemAvailableBandwidthList OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains list of available bandwidths for current system configuration (capacity and frequency band) as a string. For bandwidth values see systemBandwidth object. Value of this object is list of bandwidths separated by comma. For example, string '117,140,280,297' means, that 16.6MHz, 14MHz, 28.MHz and 29.65MHz bandwidths are available." ::= { system 16 } systemAvailableUsedCapacityList OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains list of available used capacity values for current system configuration (system capability and frequency band) as a string. For capacity values see systemUsedCapacity object. Value of this object is list of capacities separated by comma. For example, string '9,10,11,12' means, that only 4DS1, 8DS1, 12DS1 and 16DS1 capacities are available." ::= { system 17 } systemClearConfigFileAlarm OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), clear (0), equipped (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object allows manually clear Config File Alarm, which indicates that Config File on removable MMC flash card has been created with default values for all configuration points for the radio. The object is 'not-equipped' if there is no Config File Alarm and 'equipped' if Config File Alarm is set for the radio. Only 'clear' value is allowed for write for this object and only in case when this object is in equipped state." ::= { system 20 } systemShowPathAlarms OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies if Path alarm should be shown (ENABLE) or hide (DISABLE)." ::= { system 21 } -- Obsolete OID: systemRslLowAlarmSeverity OBJECT IDENTIFIER { system 22 } systemDangerousControlTimeout OBJECT-TYPE SYNTAX INTEGER (0..1440) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies timeout in minutes for Dangerous Controls (see systemModemIF-LPBK, systemMuxHighLevelLPBK, radioUnitMuteTx and radioCWTone objects). Dangerous Control will be cleared automatically when timeout for this control expired. Default value is 10 min. Value 0 indicates that the timeout is not applicable and the Dangerous Controls remain set until a user clears them." ::= { system 25 } -- Controller External Alarm systemControllerExtAlarm OBJECT IDENTIFIER ::= { system 28 } systemControllerExtAlarmName-1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object allows to set name for Controller External Alarm 1." ::= { systemControllerExtAlarm 1 } systemControllerExtAlarmName-2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object allows to set name for Controller External Alarm 2." ::= { systemControllerExtAlarm 2 } -- Opt Card External Alarm Table systemOptCardExtAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemOptCardExtAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Set name for Optional Card External Alarms." ::= { system 29 } systemOptCardExtAlarmEntry OBJECT-TYPE SYNTAX SystemOptCardExtAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object defines a row of Optional Cards Ext Alarm names." INDEX { systemOptCardExtAlarmNum } ::= { systemOptCardExtAlarmTable 1 } SystemOptCardExtAlarmEntry ::= SEQUENCE { systemOptCardExtAlarmNum INTEGER, systemOptCard1ExtAlarmName DisplayString, systemOptCard2ExtAlarmName DisplayString } -- systemOptCardExtAlarmNum OBJECT-TYPE SYNTAX INTEGER ( 1..30 ) ACCESS not-accessible STATUS mandatory DESCRIPTION "Used as index to address systemOptCardExtAlarmTable row. Number of Alarm." ::= { systemOptCardExtAlarmEntry 1 } systemOptCard1ExtAlarmName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object allows to set name for Optional Card 1 External Alarm 0...29." ::= { systemOptCardExtAlarmEntry 2 } systemOptCard2ExtAlarmName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object allows to set name for Optional Card 2 External Alarm 0..29." ::= { systemOptCardExtAlarmEntry 3 } -- Controller Ext Relay Table systemControllerExtRelayTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemControllerExtRelayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Set/Clear Controller Ext Relays if manually control mode is activated." ::= { system 30 } systemControllerExtRelayEntry OBJECT-TYPE SYNTAX SystemControllerExtRelayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object defines a row of Controller Ext Relay characteristics." INDEX { systemControllerExtRelayNum } ::= { systemControllerExtRelayTable 1 } SystemControllerExtRelayEntry ::= SEQUENCE { systemControllerExtRelayNum INTEGER, systemControllerExtRelayInput INTEGER, systemControllerExtRelayMC INTEGER } -- systemControllerExtRelayNum OBJECT-TYPE SYNTAX INTEGER ( 1..4 ) ACCESS not-accessible STATUS mandatory DESCRIPTION "Used as index to address systemControllerExtRelayTable row. Number of relay." ::= { systemControllerExtRelayEntry 1 } systemControllerExtRelayInput OBJECT-TYPE SYNTAX INTEGER { manual-control (1), major-alarm (2), minor-alarm (3), control-activated (4), input-loss-alarm (5), cable-alarm (6), rfu-alarm (7), spu-alarm (8), opt-1-orderwire-ring (9), side-a-demux-sync-loss-alarm (50), side-a-rsl-low-alarm (51), side-a-signal-degraded (52), side-a-error-second (53), side-a-ber-alarm (54), side-a-atpc-high-power-alarm (55), side-a-atpc-time-limit-alarm (56), side-a-modem-online (57), side-a-mux-online (58), side-a-mux-selected-in-tx (59), side-a-tx-channel-selected (60), side-a-rx-channel-selected (61), side-a-mux-selected-in-rx (62), side-b-demux-sync-loss-alarm (100), side-b-rsl-low-alarm (101), side-b-signal-degraded (102), side-b-error-second (103), side-b-ber-alarm (104), side-b-atpc-high-power-alarm (105), side-b-atpc-time-limit-alarm (106), side-b-modem-online (107), side-b-mux-online (108), side-b-mux-selected-in-tx (109), side-b-tx-channel-selected (110), side-b-rx-channel-selected (111), side-b-mux-selected-in-rx (112) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to select input for the Controller External Relay specified by systemControllerExtRelayNum. Each relay can be individually configurable as either linked to one of the alarms from predefined list of alarms or as manually controlled by using systemControllerExtRelayMC object. If a relay linked to an alarm it is not energized when the alarm is clear and energized when the alarm is set." ::= { systemControllerExtRelayEntry 2 } systemControllerExtRelayMC OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), de-energized (0), energized (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to SET (energized) or CLEAR (de-energized) the selected Controller External Relay, if it is configured to be controlled manually." ::= { systemControllerExtRelayEntry 3 } -- Opt Card Ext Relay Table systemOptCardExtRelayTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemOptCardExtRelayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Set/Clear Optional Card Ext Relays." ::= { system 31 } systemOptCardExtRelayEntry OBJECT-TYPE SYNTAX SystemOptCardExtRelayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object defines a row of Optional Cards Ext Relay characteristics." INDEX { systemOptCardExtRelayNum } ::= { systemOptCardExtRelayTable 1 } SystemOptCardExtRelayEntry ::= SEQUENCE { systemOptCardExtRelayNum INTEGER, systemOptCard1ExtRelayInput INTEGER, systemOptCard1ExtRelayMC INTEGER, systemOptCard2ExtRelayInput INTEGER, systemOptCard2ExtRelayMC INTEGER } -- systemOptCardExtRelayNum OBJECT-TYPE SYNTAX INTEGER ( 1..12 ) ACCESS not-accessible STATUS mandatory DESCRIPTION "Used as index to address systemOptCardExtRelayTable row. Number of relay." ::= { systemOptCardExtRelayEntry 1 } systemOptCard1ExtRelayInput OBJECT-TYPE SYNTAX INTEGER { manual-control (1), major-alarm (2), minor-alarm (3), control-activated (4), input-loss-alarm (5), cable-alarm (6), rfu-alarm (7), spu-alarm (8), opt-1-orderwire-ring (9), side-a-demux-sync-loss-alarm (50), side-a-rsl-low-alarm (51), side-a-signal-degraded (52), side-a-error-second (53), side-a-ber-alarm (54), side-a-atpc-high-power-alarm (55), side-a-atpc-time-limit-alarm (56), side-a-modem-online (57), side-a-mux-online (58), side-a-mux-selected-in-tx (59), side-a-tx-channel-selected (60), side-a-rx-channel-selected (61), side-a-mux-selected-in-rx (62), side-b-demux-sync-loss-alarm (100), side-b-rsl-low-alarm (101), side-b-signal-degraded (102), side-b-error-second (103), side-b-ber-alarm (104), side-b-atpc-high-power-alarm (105), side-b-atpc-time-limit-alarm (106), side-b-modem-online (107), side-b-mux-online (108), side-b-mux-selected-in-tx (109), side-b-tx-channel-selected (110), side-b-rx-channel-selected (111), side-b-mux-selected-in-rx (112) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to select input for the Optional Card 1 External Relay 0..11 specified by systemOptCardExtRelayNum. Each relay can be individually configurable as either linked to one of alarms from predefined list of alarms or as manually controlled by using systemControllerExtRelayMC object. If a relay linked to an alarm it is not energized when alarm is clear and energized when alarm is set." ::= { systemOptCardExtRelayEntry 2 } systemOptCard1ExtRelayMC OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), de-energized (0), energized (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to SET (energized) or CLEAR (de-energized) the selected Optional Card 1 External Relay 0..11, if it is configured to be triggered by this object, the Manual Control." ::= { systemOptCardExtRelayEntry 3 } systemOptCard2ExtRelayInput OBJECT-TYPE SYNTAX INTEGER { manual-control (1), major-alarm (2), minor-alarm (3), control-activated (4), input-loss-alarm (5), cable-alarm (6), rfu-alarm (7), spu-alarm (8), opt-1-orderwire-ring (9), side-a-demux-sync-loss-alarm (50), side-a-rsl-low-alarm (51), side-a-signal-degraded (52), side-a-error-second (53), side-a-ber-alarm (54), side-a-atpc-high-power-alarm (55), side-a-atpc-time-limit-alarm (56), side-a-modem-online (57), side-a-mux-online (58), side-a-mux-selected-in-tx (59), side-a-tx-channel-selected (60), side-a-rx-channel-selected (61), side-a-mux-selected-in-rx (62), side-b-demux-sync-loss-alarm (100), side-b-rsl-low-alarm (101), side-b-signal-degraded (102), side-b-error-second (103), side-b-ber-alarm (104), side-b-atpc-high-power-alarm (105), side-b-atpc-time-limit-alarm (106), side-b-modem-online (107), side-b-mux-online (108), side-b-mux-selected-in-tx (109), side-b-tx-channel-selected (110), side-b-rx-channel-selected (111), side-b-mux-selected-in-rx (112) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to select input for the Optional Card 2 External Relay 0..11 specified by systemOptCardExtRelayNum. Each relay can be individually configurable as either linked to one of alarms from predefined list of alarms or as manually controlled by using systemControllerExtRelayMC object. If a relay linked to an alarm it is not energized when alarm is clear and energized when alarm is set." ::= { systemOptCardExtRelayEntry 4 } systemOptCard2ExtRelayMC OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), de-energized (0), energized (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to SET (energized) or CLEAR (de-energized) the selected Optional Card 2 External Relay 0..11, if it is configured to be triggered by this object, the Manual Control." ::= { systemOptCardExtRelayEntry 5 } -- Optional Cards systemOptCards OBJECT IDENTIFIER ::= { system 32 } systemOpt1Usage OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls usage of Optional Card 1. It may be ENABLED or DISABBLED." ::= { systemOptCards 1 } systemOpt1Type OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), orderwire (32768), relay-12-alarm-12 (9472), relay-6-alarm-30 (9473), g703-v11 (9728), ethernet-over-64k (8960) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes Optional Card 2 Type. It may be ORDERWIRE, RELAY/ALARM cards, G703/V11 or Ethernet over 64 kbs." ::= { systemOptCards 2 } systemOpt2Usage OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls usage of Optional Card 2. It may be ENABLED or DISABBLED." ::= { systemOptCards 3 } systemOpt2Type OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), orderwire (32768), relay-12-alarm-12 (9472), relay-6-alarm-30 (9473), g703-v11 (9728), ethernet-over-64k (8960) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes Optional Card 2 Type. It may be ORDERWIRE, RELAY/ALARM cards, G703/V11 or Ethernet over 64 kbs." ::= { systemOptCards 4 } -- Orderwire systemOrderwire OBJECT IDENTIFIER ::= { systemOptCards 10 } systemOrderwire4WireMute1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), mute (0), on (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies Orderwire Card 1 4 Wire Mute value, which may be MUTE, ON, or NOT-EQUIPPED. Value is NOT-EQUIPPED when Orderwire 1 card is absent. The value NOT-EQUIPPED is read-only." ::= { systemOrderwire 1 } systemOrderwire4WireMute2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), mute (0), on (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies Orderwire Card 2 4 Wire Mute value, which may be MUTE, ON, or NOT-EQUIPPED. Value is NOT-EQUIPPED when Orderwire 2 card is absent. The value NOT-EQUIPPED is read-only." ::= { systemOrderwire 2 } systemOrderwireGainLevel1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), level-0-0dBm (0), level-16-7dBm (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies Orderwire Card 1 gain level value, which may be 0/0 dBm, -16/+7 dBm, or NOT-EQUIPPED. Value is NOT-EQUIPPED when Orderwire 1 card is absent. The value NOT-EQUIPPED is read-only." ::= { systemOrderwire 3 } systemOrderwireGainLevel2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), level-0-0dBm (0), level-16-7dBm (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies Orderwire Card 2 Gain Level value, which may be 0/0 dBm, -16/+7 dBm, or NOT-EQUIPPED. Value is NOT-EQUIPPED when Orderwire 2 card is absent. The value NOT-EQUIPPED is read-only." ::= { systemOrderwire 4 } systemOrderwireOverRF OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies control to ENABLE or DISABLE Orderwire channel over RF." ::= { systemOrderwire 5 } systemOrderwireOverHdlc OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies control to ENABLE or DISABLE Orderwire channel over HDLC Port." ::= { systemOrderwire 7 } systemOrderwireOverLanUp OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies control to ENABLE or DISABLE sending Orderwire packet to lan up neighborchannel." ::= { systemOrderwire 8 } systemOrderwireOverLanDown OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies control to ENABLE or DISABLE sending Orderwire packet to lan down neighborchannel." ::= { systemOrderwire 9 } -- G.703/V.11 Opt Card in Slot 1 systemG703V11Opt1 OBJECT IDENTIFIER ::= { systemOptCards 20 } systemG703V11InterfaceTypeSelectionOpt1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), g703 (0), v11 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies G.703/V.11 Optional Card 1 Interface Type. It can be G.703 (default) or V.11. This object is not available if card type is not G.703/V.11." ::= { systemG703V11Opt1 1 } systemG703V11ClockDirectionOpt1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), co-directional (0), contra-directional (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Tx Clock direction of Opt Card G.703/V.11 in slot 1. Card can be configured to send Tx Clock as co-directional and contra-directional with the transmit stream." ::= { systemG703V11Opt1 5 } systemG703V11ClockPhaseTxOpt1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), raised-edge (0), falling-edge (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies mode for Tx Data sampling for Opt Card in slot 1. It can be sampled on the raising or on the falling edge of Tx Clock. This object is alailable only for V.11 interface type." ::= { systemG703V11Opt1 6 } systemG703V11ClockPhaseRxOpt1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), raised-edge (0), falling-edge (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies mode for Rx Data sampling for Opt Card in slot 1. It can be sampled on the raising or on the falling edge of Rx Clock. This object is alailable only for V.11 interface type." ::= { systemG703V11Opt1 7 } -- G.703/V.11 Opt Card in Slot 2 systemG703V11Opt2 OBJECT IDENTIFIER ::= { systemOptCards 25 } systemG703V11InterfaceTypeSelectionOpt2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), g703 (0), v11 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies G.703/V.11 Optional Card 2 Interface Type. It can be G.703 (default) or V.11. This object is not available if card type is not G.703/V.11." ::= { systemG703V11Opt2 1 } systemG703V11ClockDirectionOpt2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), co-directional (0), contra-directional (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Tx Clock direction of Opt Card G.703/V.11 in slot 2. Card can be configured to send Tx Clock as co-directional and contra-directional with the transmit stream." ::= { systemG703V11Opt2 5 } systemG703V11ClockPhaseTxOpt2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), raised-edge (0), falling-edge (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies mode for Tx Data sampling for Opt Card in slot 2. It can be sampled on the raising or on the falling edge of Tx Clock. This object is alailable only for V.11 interface type." ::= { systemG703V11Opt2 6 } systemG703V11ClockPhaseRxOpt2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), raised-edge (0), falling-edge (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies mode for Rx Data sampling for Opt Card in slot 2. It can be sampled on the raising or on the falling edge of Rx Clock. This object is alailable only for V.11 interface type." ::= { systemG703V11Opt2 7 } -- Circuit Emulation Tunnel Communication systemCeTunnelComm OBJECT IDENTIFIER ::= { systemOptCards 100 } systemCeTunnelDstNeAddressOpt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies destination address for Opt Card 1 Tunnel Communication. Valid value of NE Address is 1..999. This object will report -1 if Optional Card Type is not G.703/V11 or Ethernet over 64 kbs (doesn't support tunnel communication). 0 value is default and means that there is no tunnel for communication." ::= { systemCeTunnelComm 11 } systemCeTunnelDstSlotOpt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies destination slot for Opt Card 1 Tunnel Communication. Optional Card, which supports tunnel communication can be in slot 1 or 2. This object will report -1 if Optional Card Type is not G.703/V11 or Ethernet over 64 kbs (doesn't support tunnel communication)." ::= { systemCeTunnelComm 12 } systemCeTunnelDstNeAddressOpt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies destination address for Opt Card 2 Tunnel Communication. Valid value of NE Address is 1..999. This object will report -1 if Optional Card Type is not G.703/V11 or Ethernet over 64 kbs (doesn't support tunnel communication). 0 value is default and means that there is no tunnel for communication." ::= { systemCeTunnelComm 21 } systemCeTunnelDstSlotOpt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies destination slot for Opt Card 2 Tunnel Communication. Optional Card, which supports tunnel communication can be in slot 1 or 2. This object will report -1 if Optional Card Type is not G.703/V11 or Ethernet over 64 kbs (doesn't support tunnel communication)." ::= { systemCeTunnelComm 22 } -- Data Channel systemDataChannel OBJECT IDENTIFIER ::= { system 34 } systemDataChannelMode OBJECT-TYPE SYNTAX INTEGER { pt-to-mpt (0), pt-to-pt (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies mode of Data Channel: point-to-multipoint or point-to-point." ::= { systemDataChannel 1 } systemDataChannelDest1 OBJECT-TYPE SYNTAX INTEGER(0..999) ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies address of destination 1 for Data Channel point-to-point mode. 0 means none." ::= { systemDataChannel 2 } systemDataChannelDest2 OBJECT-TYPE SYNTAX INTEGER(0..999) ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies address of destination 2 for Data Channel point-to-point mode. 0 means none." ::= { systemDataChannel 3 } -- Port systemPort OBJECT IDENTIFIER ::= { system 36 } systemPort1Application OBJECT-TYPE SYNTAX INTEGER { scan (0), data (8) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies protocol which is used by Port 1. There are SCAN to FarScan connection and DATA for Data Channel usage." ::= { systemPort 1 } systemPort1Parity OBJECT-TYPE SYNTAX INTEGER { none (1), odd (2), even (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the Parity of Port 1. The Parity may be NONE, ODD or EVEN." ::= { systemPort 2 } systemPort1CharLength OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), five (1), six (2), seven (3), eight (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the Char Length of a Port 1. It may be 5, 6, 7, or 8 bits. This object is available only if Port 1 application (systemPort1Parity object) is Data channel." ::= { systemPort 3 } systemPort1BaudRate OBJECT-TYPE SYNTAX INTEGER { br1200 (1),br2400 (2), br4800(3), br9600 (4), br19200 (5), br38400 (6), br57600 (7), br115200 (8) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the Baud Rate of Port 1. The Baud Rate may be 1200, 2400, 4800, 9600, 19200, 38400, 57600 or 115200. The maximum value of Baud Rate for Port 1 when used for a data channel is 19200." ::= { systemPort 4 } -- -- SNTP group -- -- SNTP - radio's system clock systemSntp OBJECT IDENTIFIER ::= { system 38 } systemSntpLocalTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the radio's local date, time and offset. Format (num of octets): year(2), month(1), day(1), hours(1), minutes(1), seconds(1), deciseconds(1), deltaUTC(3). Note 1: DeltaUTC is optional, format of deltaUTC: '+'|'-'(1), hours(1), minutes(1). Note 2: '+' = '2B'H, '-' = '2D'H. Example: May 26, 1992 at 1:30:15 PM EDT in date time format = 1992-05-26 13:30:15.0-04:00 in hexadecimal = '07C8051A0D1E0F002D0400'H" ::= { systemSntp 1 } systemSntpTimeOffset OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the radio's local time offset. Format (num of octets): '+'|'-'(1), hours(1), minutes(1). Note: '+' = '2B'H, '-' = '2D'H. Example: EDT, in date time format: -04:00 in hexadecimal = '2D0400'H" ::= { systemSntp 2 } systemSntpTimeSyncMode OBJECT-TYPE SYNTAX INTEGER { sntp (0), netcom (1), free-running-clock (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the time source for the radio. The default setting is free-running-clock." ::= { systemSntp 3 } systemSntpTimeServerMode OBJECT-TYPE SYNTAX INTEGER { sntp (0), netcom (1), sntp-and-netcom (2), disabled (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the mode of operation of the time server of the radio. The default setting is disabled. " ::= { systemSntp 4 } systemSntpPrimServ OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the IP address of the primary SNTP server." ::= { systemSntp 5 } systemSntpSecServ OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the IP address of the secondary SNTP server." ::= { systemSntp 6 } systemSntpUsedServ OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the IP address of the curent SNTP server in use." ::= { systemSntp 7 } systemSntpCurrentTimeSetting OBJECT-TYPE SYNTAX OCTET STRING (SIZE (11)) ACCESS write-only STATUS mandatory DESCRIPTION "This object is used by the MIB to set the local date and time. If a time offset is specified, it will be ignored. Format (num of octets): year(2), month(1), day(1), hours(1), minutes(1), seconds(1), deciseconds(1), deltaUTC(3). Note 1: DeltaUTC is optional, format of deltaUTC: '+'|'-'(1), hours(1), minutes(1). Note 2: '+' = '2B'H, '-' = '2D'H. Example: May 26, 1992 at 1:30:15 PM EDT in date time format = 1992-05-26 13:30:15.0-04:00 in hexadecimal = '07C8051A0D1E0F002D0400'H" ::= { systemSntp 8 } systemSntpDaylightSavingsTimeOffset OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the radio's local daylight-savings time offset. In most cases, this read/write value will be set to +1:00 in daylight-savings time, otherwise it will be set to +0:00. Format (num of octets): '+'|'-'(1), hours(1), minutes(1). Note: '+' = '2B'H, '-' = '2D'H. Example: In daylight-savings time: in date time format: +01:00 in hexadecimal = '2B0100'H" ::= { systemSntp 9 } -- ON Line Status systemOnline OBJECT IDENTIFIER ::= { system 40 } systemOnlineMuxTx-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if MUX side A transmitter is ON-LINE, OFF-LINE or NOT-EQUIPPED. The transmitter will be NOT-EQUIPPED if MUX A is absent or not used with the system's current configuration." ::= { systemOnline 1 } systemOnlineMuxTx-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if MUX side B transmitter is ON-LINE, OFF-LINE or NOT-EQUIPPED. The transmitter will be NOT-EQUIPPED if MUX B is absent or not used with the system's current configuration." ::= { systemOnline 2 } systemOnlineMuxRx-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if MUX side A receiver is ON-LINE, OFF-LINE or NOT-EQUIPPED. The receiver will be NOT-EQUIPPED if MUX A is absent or not used with the system's current configuration." ::= { systemOnline 3 } systemOnlineMuxRx-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if MUX side B receiver is ON-LINE, OFF-LINE or NOT-EQUIPPED. The receiver will be NOT-EQUIPPED if MUX B is absent or not used with the system's current configuration." ::= { systemOnline 4 } systemOnlineModemTx-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if Modem side A transmitter is ON-LINE, OFF-LINE or NOT-EQUIPPED. The transmitter will be NOT-EQUIPPED if Modem A is absent or not used with the system's current configuration." ::= { systemOnline 5 } systemOnlineModemTx-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if Modem side B transmitter is ON-LINE, OFF-LINE or NOT-EQUIPPED. The transmitter will be NOT-EQUIPPED if Modem B is absent or not used with the system's current configuration." ::= { systemOnline 6 } systemOnlineModemRx-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if Modem side A receiver is ON-LINE, OFF-LINE or NOT-EQUIPPED. The receiver will be NOT-EQUIPPED if Modem A is absent or not used with the system's current configuration." ::= { systemOnline 7 } systemOnlineModemRx-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if Modem side B receiver is ON-LINE, OFF-LINE or NOT-EQUIPPED. The receiver will be NOT-EQUIPPED if Modem B is absent or not used with the system's current configuration." ::= { systemOnline 8 } systemOnlineRfuTx-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if RFU side A transmitter is ON-LINE, OFF-LINE or NOT-EQUIPPED. The transmitter will be NOT-EQUIPPED if RFU A is absent or not used with the system's current configuration." ::= { systemOnline 9 } systemOnlineRfuTx-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if RFU side B transmitter is ON-LINE, OFF-LINE or NOT-EQUIPPED. The transmitter will be NOT-EQUIPPED if RFU B is absent or not used with the system's current configuration." ::= { systemOnline 10 } systemOnlineRfuRx-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if RFU side A receiver is ON-LINE, OFF-LINE or NOT-EQUIPPED. The receiver will be NOT-EQUIPPED if RFU A is absent or not used with the system's current configuration." ::= { systemOnline 11 } systemOnlineRfuRx-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off-line (0), on-line (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies if RFU side B receiver is ON-LINE, OFF-LINE or NOT-EQUIPPED. The receiver will be NOT-EQUIPPED if RFU B is absent or not used with the system's current configuration." ::= { systemOnline 12 } -- System Switch systemSwitch OBJECT IDENTIFIER ::= { system 42 } systemSwitchTxOut OBJECT-TYPE SYNTAX INTEGER { execute (1) } ACCESS write-only STATUS mandatory DESCRIPTION "This write-only object Switches the Transmitter output traffic to other side if the Transmitter to which the traffic would be switched is free of alarms. This is a safer operation than the Transmitter Lock, which would Lock traffic even onto an alarmed Tx." ::= { systemSwitch 1 } systemSwitchRxDecoder OBJECT-TYPE SYNTAX INTEGER { execute (1) } ACCESS write-only STATUS mandatory DESCRIPTION "This write-only object Switches the Decoder input traffic to other side if the Decoder to which the traffic would be switched is free of alarms. This is a safer operation than the Decoder Lock, which would Lock traffic even onto an alarmed Rx." ::= { systemSwitch 2 } systemSwitchRxMux OBJECT-TYPE SYNTAX INTEGER { execute (1) } ACCESS write-only STATUS mandatory DESCRIPTION "This write-only object Switches the Demux/Demodulator traffic (MUX input traffic) to other side if the Demux/Demodulator to which the traffic would be switched is free of alarms. This is a safer operation than the Rx Mux Lock, which would Lock traffic even onto an alarmed Rx." ::= { systemSwitch 3 } systemSwitchTxOutStatus OBJECT-TYPE SYNTAX INTEGER { side-A (0), side-B (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This read-only object displays the status of the Transmitter switcher." ::= { systemSwitch 4 } systemSwitchRxDecoderStatus OBJECT-TYPE SYNTAX INTEGER { side-A (0), side-B (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This read-only object displays the status of the Decoder input traffic switcher." ::= { systemSwitch 5 } systemSwitchRxMuxStatus OBJECT-TYPE SYNTAX INTEGER { side-A (0), side-B (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This read-only object displays the status of the Demux/Demodulator traffic (MUX input traffic) switcher." ::= { systemSwitch 6 } -- System Lock systemLock OBJECT IDENTIFIER ::= { system 44 } systemLockTxOutA OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), clear (0), set (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object Locks the traffic onto Transmitter A output. The value of the object may be SET, CLEAR, or NOT-EQUIPPED if side A is absent." ::= { systemLock 1 } systemLockTxOutB OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), clear (0), set (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object Locks the traffic onto Transmitter B output. The value of the object may be SET, CLEAR, or NOT-EQUIPPED if side B is absent." ::= { systemLock 2 } systemLockRxDecoderA OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), clear (0), set (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object Locks the traffic onto Decoder A input. The value of the object may be SET, CLEAR, or NOT-EQUIPPED if side A is absent." ::= { systemLock 3 } systemLockRxDecoderB OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), clear (0), set (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object Locks the traffic onto Decoder B input. The value of the object may be SET, CLEAR, or NOT-EQUIPPED if side B is absent." ::= { systemLock 4 } systemLockRxMuxA OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), clear (0), set (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object Locks the traffic onto Mux A input. The value of the object may be SET, CLEAR, or NOT-EQUIPPED if side A is absent." ::= { systemLock 5 } systemLockRxMuxB OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), clear (0), set (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object Locks the traffic onto Mux B input. The value of the object may be SET, CLEAR, or NOT-EQUIPPED if side B is absent." ::= { systemLock 6 } -- Loopbacks systemLoopback OBJECT IDENTIFIER ::= { system 46 } systemModemIF-LPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates Modem IF Loopback. This is a Dangerous Control. Setting it will cause a loss of communication with the remote site because it will automatically be cleared when the systemDangerousControlTimeout object timer expires. This object is only available when Protection is not 2+0." ::= { systemLoopback 1 } systemMuxHighLevelLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates MUX High Level Loopback. This is a Dangerous Control. Setting it will cause a loss of communication with the remote site because it will automatically be cleared when the systemDangerousControlTimeout object timer expires. The object is available when Protection is not 2+0 only." ::= { systemLoopback 2 } systemSonetLocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the loopback state if OC3/STM1 mux is present. The loopBack is done at the local system, looping the traffic received from the input to be transmitted back to the input (input loopback) or received from the far-end side to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if systemMuxLocRadioLPBKRmtReq is enabled." ::= { systemLoopback 10 } systemSonetRmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the remote loopback state if OC3/STM1 mux is present. The remote loopback is done on the remote radio system which is at the far-end of the hop from the radio where the command was issued, taking the traffic received from the local radio and looping it back to be transmitted back to the local radio." ::= { systemLoopback 11 } systemSonetLocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the local radio loopback state requested by remote site. The loopback is done on the local radio system which is at the near-end of the hop from the radio where the command was issued, taking the traffic received from the remote radio and looping it back to be transmitted back to the remote radio." ::= { systemLoopback 12 } systemModemAIF-LPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates Modem A IF Loopback. This is Dangerous Control and setting this control will cause a loss of communication with the remote equipment. Because that this loopback will be cleared automatically when timeout, which is specified by systemDangerousControlTimeout object, expired. The object is available when Protection is 2+0 only." ::= { systemLoopback 21 } systemMuxAHighLevelLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates MUX A High Level Loopback. This is Dangerous Control and setting this control will cause a loss of communication with the remote equipment. Because that this loopback will be cleared automatically when timeout, which is specified by systemDangerousControlTimeout object, expired. The object is available when Protection is 2+0 only." ::= { systemLoopback 22 } systemModemBIF-LPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates Modem B IF Loopback. This is Dangerous Control and setting this control will cause a loss of communication with the remote equipment. Because that this loopback will be cleared automatically when timeout, which is specified by systemDangerousControlTimeout object, expired. The object is available when Protection is 2+0 only." ::= { systemLoopback 31 } systemMuxBHighLevelLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates MUX B High Level Loopback. This is Dangerous Control and setting this control will cause a loss of communication with the remote equipment. Because that this loopback will be cleared automatically when timeout, which is specified by systemDangerousControlTimeout object, expired. The object is available when Protection is 2+0 only." ::= { systemLoopback 32 } -- System Sts/Stm Timing Reference systemTimingRef OBJECT IDENTIFIER ::= { system 50 } systemStsStmTimingMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), line-or-external-timing (0), through-timing (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines the mode of operation of selecting the source of timing for the outgoing STS-N and STM-M interfaces on the muxes. The object is available if the system capacity is '21E1/SUB 155MB/S'. In case of '21E1/SUB 155MB/S' system, only 'line-or-external-timing' mode is supported, and any attempt to set this to any other value will be denied. The 'through-timing' mode is reserved for future use. The object is not available when Protection is 2+0." ::= { systemTimingRef 1 } systemStsStmTimingReferencePriority1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), external-clock-input1 (0), pdh-derived (1), radio (2), local (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the first choice of timing reference source when more than one timing reference source is available. If this source is not available then the next priority object 'systemStsStmTimingReferencePriority2' is evaluated. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is not available when Protection is 2+0." ::= { systemTimingRef 4 } systemStsStmTimingReferencePriority2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), external-clock-input1 (0), pdh-derived (1), radio (2), local (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the second choice of timing reference source when more than one timing reference source is available. If priority 1 and this sources are not available then the next priority object 'systemStsStmTimingReferencePriority3' is evaluated. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is not available when Protection is 2+0." ::= { systemTimingRef 5 } systemStsStmTimingReferencePriority3 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), external-clock-input1 (0), pdh-derived (1), radio (2), local (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the third choice of timing reference source when more than one timing reference source is available. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is not available when Protection is 2+0." ::= { systemTimingRef 6 } systemExtInput1SyncQuality OBJECT-TYPE SYNTAX INTEGER ( -1..15 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a synchronization quality level for the timing reference of the external clock input 1. This value relates to the S1 byte of a STS/STM interface, bits 5, 6, 7, and 8. The value range is 0..15, or -1 if not equipped. The object is only available if the system capacity is '21E1/SUB 155MB/S'. The object is not available when Protection is 2+0." ::= { systemTimingRef 10 } systemPdhDerivedSyncQuality OBJECT-TYPE SYNTAX INTEGER ( -1..15 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a synchronization quality level for the timing reference derived from PDH (E1) incoming signal. This value relates to the S1 byte of a STS/STM interface, bits 5, 6, 7, and 8. The value range is 0..15, or -1 if not equipped. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is not available when Protection is 2+0." ::= { systemTimingRef 12 } systemMuxAStsStmTimingMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), line-or-external-timing (0), through-timing (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines the mode of operation of selecting the source of timing for the outgoing STS-N and STM-M interfaces for MUX A. The object is available if the system capacity is '21E1/SUB 155MB/S'. In case of '21E1/SUB 155MB/S' system, only 'line-or-external-timing' mode is supported, and any attempt to set this to any other value will be denied. The 'through-timing' mode is reserved for future use. The object is only available when Protection is 2+0." ::= { systemTimingRef 21 } systemMuxAStsStmTimingReferencePriority1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), external-clock-input1 (0), pdh-derived (1), radio (2), local (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the first choice of timing reference source for MUX A when more than one timing reference source is available. If this source is not available then the next priority object 'systemMuxAStsStmTimingReferencePriority2' is evaluated. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 24 } systemMuxAStsStmTimingReferencePriority2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), external-clock-input1 (0), pdh-derived (1), radio (2), local (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the second choice of timing reference source for MUX A when more than one timing reference source is available. If priority 1 and this sources are not available then the next priority object 'systemMuxAStsStmTimingReferencePriority3' is evaluated. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 25 } systemMuxAStsStmTimingReferencePriority3 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), external-clock-input1 (0), pdh-derived (1), radio (2), local (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the third choice of timing reference source for MUX A when more than one timing reference source is available. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 26 } systemMuxAStsStmRadioClockS1ByteStatus OBJECT-TYPE SYNTAX INTEGER ( -1..15 ) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the Synchronization status message (S1 status byte) of the STS/STM1 signal received from the radio interface for MUX A. This status indicates quality of Timing Reference used to generate the signal. The status byte is the S1 bits 5, 6, 7 and 8 from the incoming message. The object is available if the system capacity is '21E1/SUB 155MB/S'." ::= { systemTimingRef 30 } systemMuxARadioStsStmTimingReferenceSource OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), through (0), local (1), external-input1 (2), external-input2 (3), pdh-derived (4), radio (5), spur (6), input (7) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the STS/STM Timing Reference Source currently selected for the STS/STM signal being sent to the Radio interface for MUX A. The object is available if the system capacity is '21E1/SUB 155MB/S'." ::= { systemTimingRef 35 } systemMuxAExtInput1SyncQuality OBJECT-TYPE SYNTAX INTEGER ( -1..15 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a synchronization quality level for the timing reference of the external clock input 1 for MUX A. This value relates to the S1 byte of a STS/STM interface, bits 5, 6, 7, and 8. The value range is 0..15, or -1 if not equipped. The object is only available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 40 } systemMuxAPdhDerivedSyncQuality OBJECT-TYPE SYNTAX INTEGER ( -1..15 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a synchronization quality level for the timing reference derived from PDH (E1) incoming signal for MUX A. This value relates to the S1 byte of a STS/STM interface, bits 5, 6, 7, and 8. The value range is 0..15, or -1 if not equipped. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 42 } systemMuxBStsStmTimingMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), line-or-external-timing (0), through-timing (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines the mode of operation of selecting the source of timing for the outgoing STS-N and STM-M interfaces for MUX B. The object is available if the system capacity is '21E1/SUB 155MB/S'. In case of '21E1/SUB 155MB/S' system, only 'line-or-external-timing' mode is supported, and any attempt to set this to any other value will be denied. The 'through-timing' mode is reserved for future use. The object is only available when Protection is 2+0." ::= { systemTimingRef 51 } systemMuxBStsStmTimingReferencePriority1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), external-clock-input1 (0), pdh-derived (1), radio (2), local (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the first choice of timing reference source for MUX B when more than one timing reference source is available. If this source is not available then the next priority object 'systemMuxBStsStmTimingReferencePriority2' is evaluated. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 54 } systemMuxBStsStmTimingReferencePriority2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), external-clock-input1 (0), pdh-derived (1), radio (2), local (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the second choice of timing reference source for MUX B when more than one timing reference source is available. If priority 1 and this sources are not available then the next priority object 'systemMuxBStsStmTimingReferencePriority3' is evaluated. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 55 } systemMuxBStsStmTimingReferencePriority3 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), external-clock-input1 (0), pdh-derived (1), radio (2), local (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the third choice of timing reference source for MUX B when more than one timing reference source is available. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 56 } systemMuxBStsStmRadioClockS1ByteStatus OBJECT-TYPE SYNTAX INTEGER ( -1..15 ) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the Synchronization status message (S1 status byte) of the STS/STM1 signal received from the radio interface for MUX B. This status indicates quality of Timing Reference used to generate the signal. The status byte is the S1 bits 5, 6, 7 and 8 from the incoming message. The object is available if the system capacity is '21E1/SUB 155MB/S'." ::= { systemTimingRef 60 } systemMuxBRadioStsStmTimingReferenceSource OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), through (0), local (1), external-input1 (2), external-input2 (3), pdh-derived (4), radio (5), spur (6), input (7) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the STS/STM Timing Reference Source currently selected for the STS/STM signal being sent to the Radio interface for MUX B. The object is available if the system capacity is '21E1/SUB 155MB/S'." ::= { systemTimingRef 65 } systemMuxBExtInput1SyncQuality OBJECT-TYPE SYNTAX INTEGER ( -1..15 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a synchronization quality level for the timing reference of the external clock input 1 for MUX B. This value relates to the S1 byte of a STS/STM interface, bits 5, 6, 7, and 8. The value range is 0..15, or -1 if not equipped. The object is only available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 70 } systemMuxBPdhDerivedSyncQuality OBJECT-TYPE SYNTAX INTEGER ( -1..15 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a synchronization quality level for the timing reference derived from PDH (E1) incoming signal for MUX B. This value relates to the S1 byte of a STS/STM interface, bits 5, 6, 7, and 8. The value range is 0..15, or -1 if not equipped. The object is available if the system capacity is '21E1/SUB 155MB/S'. The object is only available when Protection is 2+0." ::= { systemTimingRef 72 } systemRadioDuplexMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), duplex (0), simplex-tx (1), simplex-rx (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Radio operation mode. The TRuepoint system can operate in duplex or in simplex mode. In duplex mode there is a transmitter and a receiver at both ends of a hop. In simplex mode, the data transmission is unidirectional, i.e. on end of a hop only transmits (in Simplex TX mode) while the other end of the hop only receives (in Simplex RX mode). This configuration point will be not-equipped if the System Capability is not DS3/E3+WS or System Capability is DS3/E3+WS but Used Capacity is not DS3 or DS3+DS1. Radio works in duplex mode in this case." ::= { system 51 } -- Reboot/Upgrade systemReboot OBJECT IDENTIFIER ::= { system 90 } systemRebootDelay OBJECT-TYPE SYNTAX INTEGER (0..999999) ACCESS read-write STATUS mandatory DESCRIPTION "This is time delay to equipment reboot. 4 byte integer value represents time delay in seconds. Count down will be started only after systemRebootCommand execution. If a reboot countdown has started, it may be cancelled by setting this object value to 0." ::= { systemReboot 1 } systemImmediateReboot OBJECT-TYPE SYNTAX INTEGER { execute (1) } ACCESS write-only STATUS mandatory DESCRIPTION "Command to equipment reboot. Primary bank content will be used at startup. Reboot will happen immediately independent of the value of 'systemRebootDelay' object. WARNING: This is traffic affected action!" ::= { systemReboot 2 } systemRebootAlternateSystem OBJECT-TYPE SYNTAX INTEGER { not-scheduled (0), execute (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Command to equipment reboot. Alternate bank content will be used at startup. Banks will be switched and all hardware components will be loaded to cards after reboot. Reboot will happen in seconds, specified in 'systemRebootDelay' object. To cancel a scheduled reboot, the object 'systemRebootDelay' must be set to 0 before that countdown value reaches zero. WARNING: This is traffic affected action!" ::= { systemReboot 3 } systemRebootAlternateSoftware OBJECT-TYPE SYNTAX INTEGER { not-scheduled (0), execute (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Command to equipment reboot. Alternate bank content will be used at startup. Reboot will happen in seconds, specified in 'systemRebootDelay' object. To cancel a scheduled reboot, the object 'systemRebootDelay' must be set to 0 before that countdown value reaches zero." ::= { systemReboot 4 } systemUpgradeHardware OBJECT-TYPE SYNTAX INTEGER { execute (1) } ACCESS write-only STATUS mandatory DESCRIPTION "Command to upgrade hardware. Primary bank content will be used to load all cards. Action will happen in seconds, specified in 'systemRebootDelay' object. WARNING: This is traffic affected action!" ::= { systemReboot 5 } systemUpgradeRfu-A OBJECT-TYPE SYNTAX INTEGER { execute (1) } ACCESS write-only STATUS mandatory DESCRIPTION "Command to upgrade RFU A. Primary bank content will be used to load firmware files to RFU A." ::= { systemReboot 6 } systemUpgradeRfu-B OBJECT-TYPE SYNTAX INTEGER { execute (1) } ACCESS write-only STATUS mandatory DESCRIPTION "Command to upgrade RFU B. Primary bank content will be used to load firmware files to RFU B." ::= { systemReboot 7 } systemUpgradeStateRfu-A OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object reports RFU A upgrade state and download percentage. Object will report N/A if RFU A is not in upgrade state." ::= { systemReboot 8 } systemUpgradeStateRfu-B OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object reports RFU B upgrade state and download percentage. Object will report N/A if RFU B is not in upgrade state." ::= { systemReboot 9 } -- System LED state systemLed OBJECT IDENTIFIER ::= { system 95 } systemLedMajorCtrl OBJECT-TYPE SYNTAX INTEGER { green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of MAJOR LED of the Controller. It indicates major alarm condition, when radio does not pass traffic. This is dual color LED: GREEN - normal, RED - major alarm." ::= { systemLed 1 } systemLedMinorCtrl OBJECT-TYPE SYNTAX INTEGER { off (0), yellow (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of MINOR LED of the Controller. It indicates minor alarm or override condition. This is YELLOW color LED. OFF - normal, ON - minor alarm." ::= { systemLed 2 } systemLedRemoteCtrl OBJECT-TYPE SYNTAX INTEGER { off (0), yellow (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of REMOTE LED of the Controller. It indicates status of the remote radio. This is YELLOW color LED. OFF - remote radio is normal, ON - remote radio is in alarm." ::= { systemLed 3 } systemLedRpmMux-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RPM LED of the Mux A Card. It indicates the 'Replace Me' Alarm on Mux A Card. This is dual color LED. GREEN - Mux Card is normal, RED - Mux Card needs to be replaced." ::= { systemLed 4 } systemLedTrafficMux-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off (0), green (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of TRAFFIC LED of the Mux A Card. It indicates the online status of Mux. This is GREEN color LED. OFF - no traffic, GREEN - traffic carrying." ::= { systemLed 5 } systemLedRpmMux-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RPM LED of the Mux B Card. It indicates the 'Replace Me' Alarm on Mux B Card. This is dual color LED. GREEN - Mux Card is normal, RED - Mux Card needs to be replaced." ::= { systemLed 6 } systemLedTrafficMux-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off (0), green (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of TRAFFIC LED of the Mux B Card. It indicates the online status of Mux. This is GREEN color LED. OFF - no traffic, GREEN - traffic carrying." ::= { systemLed 7 } systemLedRpmModem-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RPM LED of the Modem A Card. It indicates the 'Replace Me' Alarm on Modem A Card. This is dual color LED. GREEN - Modem Card is normal, RED - Modem Card needs to be replaced." ::= { systemLed 8 } systemLedCableModem-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of CABLE LED of the Modem A Card. It indicates the 'Cable Alarm' on Modem A Card. This is dual color LED. GREEN - Cable is normal, RED - Cable Alarm." ::= { systemLed 9 } systemLedRfuModem-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RFU LED of the Modem A Card. It indicates the 'RFU Replace Me' Alarm, which is connected to Modem A Card. This is dual color LED. GREEN - RFU is normal, RED - RFU needs to be replaced." ::= { systemLed 10 } systemLedTrafficModem-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off (0), green (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of TRAFFIC LED of the Modem A Card. It indicates the online status of Modem. This is GREEN color LED. OFF - no traffic, GREEN - traffic carrying." ::= { systemLed 11 } systemLedRpmModem-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RPM LED of the Modem B Card. It indicates the 'Replace Me' Alarm on Modem B Card. This is dual color LED. GREEN - Modem Card is normal, RED - Modem Card needs to be replaced." ::= { systemLed 12 } systemLedCableModem-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of CABLE LED of the Modem B Card. It indicates the 'Cable Alarm' on Modem B Card. This is dual color LED. GREEN - Cable is normal, RED - Cable Alarm." ::= { systemLed 13 } systemLedRfuModem-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RFU LED of the Modem B Card. It indicates the 'RFU Replace Me' Alarm, which is connected to Modem B Card. This is dual color LED. GREEN - RFU is normal, RED - RFU needs to be replaced." ::= { systemLed 14 } systemLedTrafficModem-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off (0), green (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of TRAFFIC LED of the Modem B Card. It indicates the online status of Modem. This is GREEN color LED. OFF - no traffic, GREEN - traffic carrying." ::= { systemLed 15 } systemLedRingOw-1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off (0), yellow (6), flash (4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RING LED of the Orderwire Card 1. It indicates the ringing status. This is YELLOW color LED. OFF - on-hook, YELLOW - off-hook, FLASHING - ringing." ::= { systemLed 16 } systemLedRpmOpt-1 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RPM LED of the Optional Card 1. It indicates the 'Replace Me' Alarm on Opt Card in slot 1. This is dual color LED. GREEN - Optional Card is normal, RED - Optional Card needs to be replaced." ::= { systemLed 17 } systemLedRingOw-2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), off (0), yellow (6), flash (4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RING LED of the Orderwire Card 2. It indicates the ringing status. This is YELLOW color LED. OFF - on-hook, YELLOW - off-hook, FLASHING - ringing." ::= { systemLed 18 } systemLedRpmOpt-2 OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), green (0), red (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects state of RPM LED of the Optional Card 2. It indicates the 'Replace Me' Alarm on Opt Card in slot 2. This is dual color LED. GREEN - Optional Card is normal, RED - Optional Card needs to be replaced." ::= { systemLed 19 } systemRemoteIpAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the IP address the Remote system. It will equals to 'empty' if there is no connection to remote." ::= { system 100 } -- -- The Tributary Group -- -- NxE1/NxDS1 Tributary tributaryTable OBJECT-TYPE SYNTAX SEQUENCE OF TributaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table reports Tributary characteristics. Each Tributary has an associated row that includes the following: the Tributary number (1 through 28), the Tributary's State, LPBKs, Code and Equalizer." ::= { tributary 1 } tributaryEntry OBJECT-TYPE SYNTAX TributaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the tributary table" INDEX { tributaryNumber } ::= { tributaryTable 1 } TributaryEntry ::= SEQUENCE { tributaryNumber INTEGER, tributaryState INTEGER, tributaryCode INTEGER, tributaryEqualizer INTEGER, tributaryLocLPBK INTEGER, tributaryRmtRadioLPBK INTEGER, tributaryLocRadioLPBKRmtReq INTEGER, tributaryMuxAState INTEGER, tributaryMuxACode INTEGER, tributaryMuxAEqualizer INTEGER, tributaryMuxALocLPBK INTEGER, tributaryMuxARmtRadioLPBK INTEGER, tributaryMuxALocRadioLPBKRmtReq INTEGER, tributaryMuxBState INTEGER, tributaryMuxBCode INTEGER, tributaryMuxBEqualizer INTEGER, tributaryMuxBLocLPBK INTEGER, tributaryMuxBRmtRadioLPBK INTEGER, tributaryMuxBLocRadioLPBKRmtReq INTEGER } tributaryNumber OBJECT-TYPE SYNTAX INTEGER (1..28) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the tributaryTable. Its value represents the Tributary number (1 through 28)." ::= { tributaryEntry 1 } tributaryState OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary indicated by 'tributaryNumber' is disabled or enabled to carry traffic. The object is not available when Protection is 2+0." ::= { tributaryEntry 2 } tributaryCode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), b8zs (0), ami (1), hdb3 (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the type of line code used on the tributary indicated by 'tributaryNumber'. B8ZS tributary code is available only in xDS1 configuration. HDB3 tributary code is available only in xE1 configuration. The object is not available when Protection is 2+0." ::= { tributaryEntry 3 } tributaryEqualizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), upto133 (3), from133to266 (4), from266to399 (5), from399to533 (6), from533to655 (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the status of the tributary line equalizer indicated by 'tributaryNumber'. This object is not available for E-rate system. The object is not available when Protection is 2+0." ::= { tributaryEntry 4 } tributaryLocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the local tributary loopback state of the tributary indicated by 'tributaryNumber'. The loopback is done at the local system, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end back to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if tributaryLocRadioLPBKRmtReq is enabled. The object is not available when Protection is 2+0." ::= { tributaryEntry 10 } tributaryRmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the remote radio loopback state of the tributary indicated by 'tributaryNumber'. The loopback is done at the remote radio system, looping the traffic received from the near-end to be transmitted back to the near-end of the hop. The object is not available when Protection is 2+0." ::= { tributaryEntry 11 } tributaryLocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This table object specifies the radio loopback state of the tributary indicated by 'tributaryNumber' and requested by remote site. The loopback is done at the local radio system, looping the traffic received from the far-end back to be transmitted back to the far-end of the hop. The object is not available when Protection is 2+0." ::= { tributaryEntry 12 } tributaryMuxAState OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX A tributary indicated by 'tributaryNumber' is disabled or enabled to carry traffic. The object is available when Protection is 2+0 only." ::= { tributaryEntry 22 } tributaryMuxACode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), b8zs (0), ami (1), hdb3 (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the type of line code used on the MUX A tributary indicated by 'tributaryNumber'. B8ZS tributary code is available only in xDS1 configuration. HDB3 tributary code is available only in xE1 configuration. The object is available when Protection is 2+0 only." ::= { tributaryEntry 23 } tributaryMuxAEqualizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), upto133 (3), from133to266 (4), from266to399 (5), from399to533 (6), from533to655 (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the status of the MUX A tributary line equalizer indicated by 'tributaryNumber'. This object is not available for E-rate system. The object is available when Protection is 2+0 only." ::= { tributaryEntry 24 } tributaryMuxALocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the local tributary loopback state of the MUX A tributary indicated by 'tributaryNumber'. The loopback is done at the local system, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end back to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if tributaryLocRadioLPBKRmtReq is enabled. The object is available when Protection is 2+0 only." ::= { tributaryEntry 30 } tributaryMuxARmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the remote radio loopback state of the MUX A tributary indicated by 'tributaryNumber'. The loopback is done at the remote radio system, looping the traffic received from the near-end to be transmitted back to the near-end of the hop. The object is available when Protection is 2+0 only." ::= { tributaryEntry 31 } tributaryMuxALocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This table object specifies the radio loopback state of the MUX A tributary indicated by 'tributaryNumber' and requested by remote site. The loopback is done at the local radio system, looping the traffic received from the far-end back to be transmitted back to the far-end of the hop. The object is available when Protection is 2+0 only." ::= { tributaryEntry 32 } tributaryMuxBState OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX B tributary indicated by 'tributaryNumber' is disabled or enabled to carry traffic. The object is available when Protection is 2+0 only." ::= { tributaryEntry 42 } tributaryMuxBCode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), b8zs (0), ami (1), hdb3 (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the type of line code used on the MUX B tributary indicated by 'tributaryNumber'. B8ZS tributary code is available only in xDS1 configuration. HDB3 tributary code is available only in xE1 configuration. The object is available when Protection is 2+0 only." ::= { tributaryEntry 43 } tributaryMuxBEqualizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), upto133 (3), from133to266 (4), from266to399 (5), from399to533 (6), from533to655 (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the status of the MUX B tributary line equalizer indicated by 'tributaryNumber'. This object is not available for E-rate system. The object is available when Protection is 2+0 only." ::= { tributaryEntry 44 } tributaryMuxBLocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the local tributary loopback state of the MUX B tributary indicated by 'tributaryNumber'. The loopback is done at the local system, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end back to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if tributaryLocRadioLPBKRmtReq is enabled. The object is available when Protection is 2+0 only." ::= { tributaryEntry 50 } tributaryMuxBRmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the remote radio loopback state of the MUX B tributary indicated by 'tributaryNumber'. The loopback is done at the remote radio system, looping the traffic received from the near-end to be transmitted back to the near-end of the hop. The object is available when Protection is 2+0 only." ::= { tributaryEntry 51 } tributaryMuxBLocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This table object specifies the radio loopback state of the MUX B tributary indicated by 'tributaryNumber' and requested by remote site. The loopback is done at the local radio system, looping the traffic received from the far-end back to be transmitted back to the far-end of the hop. The object is available when Protection is 2+0 only." ::= { tributaryEntry 52 } -- 21E1 Tributary tributary21E1 OBJECT IDENTIFIER ::= { tributary 4 } tributary21E1MuxClockSource OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), autmatic (0), external (1), internal (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies 21E1 MUX Clock Source. When external clock is selected, the clock on the external Mux connector or on the SDM will be used. When internal clock is selected, the internal MUX clock will be used. When the automatic clock mode is selected, if a valid external clock is available, the external clock will be used, otherwize, the internal clock will be used. The object is not available when Protection is 2+0." ::= { tributary21E1 1 } tributary21E1MuxAClockSource OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), autmatic (0), external (1), internal (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies 21E1 MUX A Clock Source. When external clock is selected, the clock on the external Mux connector or on the SDM will be used. When internal clock is selected, the internal MUX clock will be used. When the automatic clock mode is selected, if a valid external clock is available, the external clock will be used, otherwize, the internal clock will be used. The object is available when Protection is 2+0 only." ::= { tributary21E1 11 } tributary21E1MuxBClockSource OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), autmatic (0), external (1), internal (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies 21E1 MUX B Clock Source. When external clock is selected, the clock on the external Mux connector or on the SDM will be used. When internal clock is selected, the internal MUX clock will be used. When the automatic clock mode is selected, if a valid external clock is available, the external clock will be used, otherwize, the internal clock will be used. The object is available when Protection is 2+0 only." ::= { tributary21E1 12 } -- 28DS1 Tributary tributary28DS1 OBJECT IDENTIFIER ::= { tributary 6 } tributary28DS1MuxFramingFormat OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), m1-3-asynchronous (0), c-bit-parity (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies 28DS1 MUX Framing Mode. The 28DS1 are packets in a DS3 using M1-3 asynchronous format or Telecordia's C-bit Parity framing format. Available if MUX is 28DS1 or ADM 8DS1/DS3+DS1. The object is not available when Protection is 2+0." ::= { tributary28DS1 1 } tributary28DS1MuxAFramingFormat OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), m1-3-asynchronous (0), c-bit-parity (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies 28DS1 MUX A Framing Mode. The 28DS1 are packets in a DS3 using M1-3 asynchronous format or Telecordia's C-bit Parity framing format. Available if MUX is 28DS1 or ADM 8DS1/DS3+DS1. The object is available when Protection is 2+0 only." ::= { tributary28DS1 11 } tributary28DS1MuxBFramingFormat OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), m1-3-asynchronous (0), c-bit-parity (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies 28DS1 MUX B Framing Mode. The 28DS1 are packets in a DS3 using M1-3 asynchronous format or Telecordia's C-bit Parity framing format. Available if MUX is 28DS1 or ADM 8DS1/DS3+DS1. The object is available when Protection is 2+0 only." ::= { tributary28DS1 12 } -- E3/DS3 Tributary tributaryE3DS3Table OBJECT-TYPE SYNTAX SEQUENCE OF TributaryE3DS3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table reports E3/DS3 Tributary characteristics. Each Tributary has an associated row that includes the following: the Tributary number (1 through 3), the Wayside's State, LPBKs, Code and Equalazer." ::= { tributary 10 } tributaryE3DS3Entry OBJECT-TYPE SYNTAX TributaryE3DS3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the E3/DS3 tributary table" INDEX { tributaryE3DS3Number } ::= { tributaryE3DS3Table 1 } TributaryE3DS3Entry ::= SEQUENCE { tributaryE3DS3Number INTEGER, tributaryE3DS3State INTEGER, tributaryE3DS3Equalizer INTEGER, tributaryDS3FrameMode INTEGER, tributaryE3DS3LocLPBK INTEGER, tributaryE3DS3RmtRadioLPBK INTEGER, tributaryE3DS3LocRadioLPBKRmtReq INTEGER, tributaryMuxAE3DS3State INTEGER, tributaryMuxAE3DS3Equalizer INTEGER, tributaryMuxADS3FrameMode INTEGER, tributaryMuxAE3DS3LocLPBK INTEGER, tributaryMuxAE3DS3RmtRadioLPBK INTEGER, tributaryMuxAE3DS3LocRadioLPBKRmtReq INTEGER, tributaryMuxBE3DS3State INTEGER, tributaryMuxBE3DS3Equalizer INTEGER, tributaryMuxBDS3FrameMode INTEGER, tributaryMuxBE3DS3LocLPBK INTEGER, tributaryMuxBE3DS3RmtRadioLPBK INTEGER, tributaryMuxBE3DS3LocRadioLPBKRmtReq INTEGER } tributaryE3DS3Number OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the tributaryE3DS3Table. Its value represents the Tributary number (1 through 3)." ::= { tributaryE3DS3Entry 1 } tributaryE3DS3State OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary indicated by 'tributaryE3DS3Number' is disabled or enabled to carry traffic. The object is not available when Protection is 2+0." ::= { tributaryE3DS3Entry 2 } tributaryE3DS3Equalizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), upto225 (0), from226to450 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the status of the E3/DS3 tributary line equalizer indicated by 'tributaryE3DS3Number'. The object is not available when Protection is 2+0." ::= { tributaryE3DS3Entry 4 } tributaryDS3FrameMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), transparent (0), mFrame (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Frame Mode of DS3 tributary indicated by 'tributaryE3DS3Number'. It can be mFrame or Transparent. Mode is Transparent by default. This object is available when capacity is DS3, DS3+DS1, 3DS3-3DS1 only. The object is not available when Protection is 2+0." ::= { tributaryE3DS3Entry 5 } tributaryE3DS3LocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the local E3/DS3 tributary loopback state of the E3/DS3 tributary indicated by 'tributaryE3DS3Number'. The loopback is done at the local system, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end back to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if tributaryE3DS3LocRadioLPBKRmtReq is enabled. The object is not available when Protection is 2+0." ::= { tributaryE3DS3Entry 10 } tributaryE3DS3RmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the remote radio loopback state of the E3/DS3 tributary indicated by 'tributaryE3DS3Number'. The loopback is done at the remote radio system, looping the traffic received from the near-end to be transmitted back to the near-end of the hop. The object is not available when Protection is 2+0." ::= { tributaryE3DS3Entry 11 } tributaryE3DS3LocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This table object specifies the radio loopback state of the E3/DS3 tributary indicated by 'tributaryE3DS3Number' and requested by remote site. The loopback is done at the local radio system, looping the traffic received from the far-end back to be transmitted back to the far-end of the hop. The object is not available when Protection is 2+0." ::= { tributaryE3DS3Entry 12 } tributaryMuxAE3DS3State OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX A E3/DS3 tributary indicated by 'tributaryE3DS3Number' is disabled or enabled to carry traffic. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 22 } tributaryMuxAE3DS3Equalizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), upto225 (0), from226to450 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the status of the MUX A E3/DS3 tributary line equalizer indicated by 'tributaryE3DS3Number'. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 24 } tributaryMuxADS3FrameMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), transparent (0), mFrame (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Frame Mode of MUX A DS3 tributary indicated by 'tributaryE3DS3Number'. It can be mFrame or Transparent. Mode is Transparent by default. This object is available when capacity is DS3 or DS3+DS1 only. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 25 } tributaryMuxAE3DS3LocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the local tributary loopback state of the MUX A E3/DS3 tributary indicated by 'tributaryE3DS3Number'. The loopback is done at the local system, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end back to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if tributaryMuxAE3LocRadioLPBKRmtReq is enabled. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 30 } tributaryMuxAE3DS3RmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the remote radio loopback state of the MUX A E3/DS3 tributary indicated by 'tributaryE3DS3Number'. The loopback is done at the remote radio system, looping the traffic received from the near-end to be transmitted back to the near-end of the hop. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 31 } tributaryMuxAE3DS3LocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This table object specifies the radio loopback state of the MUX A E3/DS3 tributary indicated by 'tributaryE3DS3Number' and requested by remote site. The loopback is done at the local radio system, looping the traffic received from the far-end back to be transmitted back to the far-end of the hop. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 32 } tributaryMuxBE3DS3State OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX B E3/DS3 tributary indicated by 'tributaryE3DS3Number' is disabled or enabled to carry traffic. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 42 } tributaryMuxBE3DS3Equalizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), upto225 (0), from226to450 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the status of the MUX B E3/DS3 tributary line equalizer indicated by 'tributaryE3DS3Number'. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 44 } tributaryMuxBDS3FrameMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), transparent (0), mFrame (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Frame Mode of MUX B DS3 tributary indicated by 'tributaryE3DS3Number'. It can be mFrame or Transparent. Mode is Transparent by default. This object is available when capacity is DS3 or DS3+DS1 only. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 45 } tributaryMuxBE3DS3LocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the local tributary loopback state of the MUX B E3/DS3 tributary indicated by 'tributaryE3DS3Number'. The loopback is done at the local system, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end back to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if tributaryMuxBE3LocRadioLPBKRmtReq is enabled. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 50 } tributaryMuxBE3DS3RmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies the remote radio loopback state of the MUX B E3/DS3 tributary indicated by 'tributaryE3DS3Number'. The loopback is done at the remote radio system, looping the traffic received from the near-end to be transmitted back to the near-end of the hop. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 51 } tributaryMuxBE3DS3LocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This table object specifies the radio loopback state of the MUX B E3/DS3 tributary indicated by 'tributaryE3DS3Number' and requested by remote site. The loopback is done at the local radio system, looping the traffic received from the far-end back to be transmitted back to the far-end of the hop. The object is available when Protection is 2+0 only." ::= { tributaryE3DS3Entry 52 } -- 100BT Tributary tributary100BT OBJECT IDENTIFIER ::= { tributary 20 } tributaryMuxEthernetPortSegregation OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX Ethernet Port Segregation mode. The segregation can be enabled or disabled. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1,. The object is not available when Protection is 2+0." ::= { tributary100BT 1 } tributaryMuxEthernetPort1Enable OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX Ethernet Port 1 mode. Port 1 can be enabled or disabled. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { tributary100BT 2 } tributaryMuxEthernetPort2Enable OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX Ethernet Port 2 mode. Port 2 can be enabled or disabled. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { tributary100BT 3 } tributaryMuxEthernetPort1RateLimit OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), no-limit (0), limit-128Kbps (1), limit-256Kbps (2), limit-512Kbps (3), limit-1Mbps (4), limit-2Mbps (5), limit-4Mbps (6), limit-8Mbps (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies rate limit for MUX Ethernet Port 1. The rate can be limited by 128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps or rate can be not limited. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1 and EthernetPortSegregation is enabled and both EthernetPort1FixedCapacity and EthernetPort2FixedCapacity are disabled. The object is not available when Protection is 2+0." ::= { tributary100BT 5 } tributaryMuxEthernetPort2RateLimit OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), no-limit (0), limit-128Kbps (1), limit-256Kbps (2), limit-512Kbps (3), limit-1Mbps (4), limit-2Mbps (5), limit-4Mbps (6), limit-8Mbps (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies rate limit for MUX Ethernet Port 2. The rate can be limited by 128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps or rate can be not limited. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1 and EthernetPortSegregation is enabled and both EthernetPort1FixedCapacity and EthernetPort2FixedCapacity are disabled. The object is not available when Protection is 2+0." ::= { tributary100BT 6 } tributaryMuxAEthernetPortSegregation OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX A Ethernet Port Segregation mode. The segregation can be enabled or disabled. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributary100BT 11 } tributaryMuxAEthernetPort1Enable OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX A Ethernet Port 1 mode. Port 1 can be enabled or disabled. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributary100BT 12 } tributaryMuxAEthernetPort2Enable OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX A Ethernet Port 2 mode. Port 2 can be enabled or disabled. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributary100BT 13 } tributaryMuxAEthernetPort1RateLimit OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), no-limit (0), limit-128Kbps (1), limit-256Kbps (2), limit-512Kbps (3), limit-1Mbps (4), limit-2Mbps (5), limit-4Mbps (6), limit-8Mbps (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies rate limit for MUX A Ethernet Port 1. The rate can be limited by 128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps or rate can be not limited. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1 and EthernetPortSegregation is enabled and both EthernetPort1FixedCapacity and EthernetPort2FixedCapacity are disabled. The object is available when Protection is 2+0 only." ::= { tributary100BT 15 } tributaryMuxAEthernetPort2RateLimit OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), no-limit (0), limit-128Kbps (1), limit-256Kbps (2), limit-512Kbps (3), limit-1Mbps (4), limit-2Mbps (5), limit-4Mbps (6), limit-8Mbps (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies rate limit for MUX A Ethernet Port 2. The rate can be limited by 128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps or rate can be not limited. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1 and EthernetPortSegregation is enabled and both EthernetPort1FixedCapacity and EthernetPort2FixedCapacity are disabled. The object is available when Protection is 2+0 only." ::= { tributary100BT 16 } tributaryMuxBEthernetPortSegregation OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX B Ethernet Port Segregation mode. The segregation can be enabled or disabled. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributary100BT 21 } tributaryMuxBEthernetPort1Enable OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX B Ethernet Port 1 mode. Port 1 can be enabled or disabled. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributary100BT 22 } tributaryMuxBEthernetPort2Enable OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX B Ethernet Port 2 mode. Port 2 can be enabled or disabled. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributary100BT 23 } tributaryMuxBEthernetPort1RateLimit OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), no-limit (0), limit-128Kbps (1), limit-256Kbps (2), limit-512Kbps (3), limit-1Mbps (4), limit-2Mbps (5), limit-4Mbps (6), limit-8Mbps (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies rate limit for MUX B Ethernet Port 1. The rate can be limited by 128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps or rate can be not limited. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1 and EthernetPortSegregation is enabled and both EthernetPort1FixedCapacity and EthernetPort2FixedCapacity are disabled. The object is available when Protection is 2+0 only." ::= { tributary100BT 25 } tributaryMuxBEthernetPort2RateLimit OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), no-limit (0), limit-128Kbps (1), limit-256Kbps (2), limit-512Kbps (3), limit-1Mbps (4), limit-2Mbps (5), limit-4Mbps (6), limit-8Mbps (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies rate limit for MUX B Ethernet Port 2. The rate can be limited by 128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps or rate can be not limited. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1 and EthernetPortSegregation is enabled and both EthernetPort1FixedCapacity and EthernetPort2FixedCapacity are disabled. The object is available when Protection is 2+0 only." ::= { tributary100BT 26 } -- Ethernet QOS (Quality-of-Service) objects for tributary100BT node ethernetQOS OBJECT IDENTIFIER ::= { tributary100BT 80 } tributaryMuxEthernetPort1VtagToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 1 frames tagged with IEEE 802.1p priority to Quality-of-Service (QOS). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 10 } tributaryMuxEthernetPort2VtagToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 2 frames tagged with IEEE 802.1p priority to Quality-of-Service (QOS). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 11 } tributaryMuxEthernetPort1IptcToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 1 IP packets to Quality-of-Service (QOS) based on bits 2-7 of IPv4 TOS byte or of IPv6 Traffic Class byte. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 15 } tributaryMuxEthernetPort2IptcToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 2 IP packets to Quality-of-Service (QOS) based on bits 2-7 of IPv4 TOS byte or of IPv6 Traffic Class byte. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 16 } tributaryMuxEthernetPort1VtagQosOverIptc OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), false (0), true (1) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 1 contains both an IEEE 802.1p tag and an IP datagram (and both QOS mapping are enabled), this object indicates to map that Ethernet frame to QOS based on IEEE 802.1p tag (true) or based on IP TOS/Traffic Class byte (false). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 20 } tributaryMuxEthernetPort2VtagQosOverIptc OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), false (0), true (1) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 2 contains both an IEEE 802.1p tag and an IP datagram (and both QOS mapping are enabled), this object indicates to map that Ethernet frame to QOS based on IEEE 802.1p tag (true) or based on IP TOS/Traffic Class byte (false). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 21 } tributaryMuxEthernetPort1DefaultQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 1 contains neither an IEEE 802.1p tag nor an IP datagram (or both QOS mapping are disabled), this object indicates to map that Ethernet frame to the specified default QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 25 } tributaryMuxEthernetPort2DefaultQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 2 contains neither an IEEE 802.1p tag nor an IP datagram (or both QOS mapping are disabled), this object indicates to map that Ethernet frame to the specified default QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 26 } tributaryMuxEthernetVtagMappingQosTable OBJECT-TYPE SYNTAX SEQUENCE OF TributaryMuxEthernetVtagMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table configures Mux Ethernet IEEE 802.1p tag mapping to QOS. Each IEEE 802.1p priority (0..7) has an associated row for mapping to QOS 'best-effort', 'low', 'medium' or 'high'. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 30 } tributaryMuxEthernetVtagMappingQosEntry OBJECT-TYPE SYNTAX TributaryMuxEthernetVtagMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the Tributary 100BT Mux Ethernet IEEE 802.1p mapping to QOS table." INDEX { tributaryMuxEthernetVtagMappingQosNumber } ::= { tributaryMuxEthernetVtagMappingQosTable 1 } TributaryMuxEthernetVtagMappingQosEntry ::= SEQUENCE { tributaryMuxEthernetVtagMappingQosNumber INTEGER, tributaryMuxEthernetVtagMappingQosSetting INTEGER } tributaryMuxEthernetVtagMappingQosNumber OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the tributaryMuxEthernetVtagMappingQosTable. Its value represents the IEEE 802.1p tag priority (0 through 7)." ::= { tributaryMuxEthernetVtagMappingQosEntry 1 } tributaryMuxEthernetVtagMappingQosSetting OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the IEEE 802.1p priority indicated by 'tributaryMuxEthernetVtagMappingQosNumber' is to be mapped to 'best-effort', 'low', 'medium' or 'high' QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { tributaryMuxEthernetVtagMappingQosEntry 2 } tributaryMuxEthernetIptcgMappingQosTable OBJECT-TYPE SYNTAX SEQUENCE OF TributaryMuxEthernetIptcgMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table configures Mux Ethernet IP Traffic Class mapping to QOS. Each IPv4 TOS byte or IPv6 TC byte bits 2-7 Traffic Class (0..63) has an associated row for mapping to QOS 'best-effort', 'low', 'medium' or 'high'. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { ethernetQOS 31 } tributaryMuxEthernetIptcgMappingQosEntry OBJECT-TYPE SYNTAX TributaryMuxEthernetIptcgMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the Tributary 100BT Mux Ethernet IP Traffic Class mapping to QOS table." INDEX { tributaryMuxEthernetIptcgMappingQosNumber } ::= { tributaryMuxEthernetIptcgMappingQosTable 1 } TributaryMuxEthernetIptcgMappingQosEntry ::= SEQUENCE { tributaryMuxEthernetIptcgMappingQosNumber INTEGER, tributaryMuxEthernetIptcgMappingQosSetting INTEGER } tributaryMuxEthernetIptcgMappingQosNumber OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the tributaryMuxEthernetIptcgMappingQosTable. Its value represents the IP Traffic Class (0 through 63)." ::= { tributaryMuxEthernetIptcgMappingQosEntry 1 } tributaryMuxEthernetIptcgMappingQosSetting OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the IP Traffic Class indicated by 'tributaryMuxEthernetIptcgMappingQosNumber' is to be mapped to 'best-effort', 'low', 'medium' or 'high' QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is not 2+0." ::= { tributaryMuxEthernetIptcgMappingQosEntry 2 } tributaryMuxAEthernetPort1VtagToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 1 frames tagged with IEEE 802.1p priority to Quality-of-Service (QOS). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 60 } tributaryMuxAEthernetPort2VtagToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 2 frames tagged with IEEE 802.1p priority to Quality-of-Service (QOS). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 61 } tributaryMuxAEthernetPort1IptcToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 1 IP packets to Quality-of-Service (QOS) based on bits 2-7 of IPv4 TOS byte or of IPv6 Traffic Class byte. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 65 } tributaryMuxAEthernetPort2IptcToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 2 IP packets to Quality-of-Service (QOS) based on bits 2-7 of IPv4 TOS byte or of IPv6 Traffic Class byte. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 66 } tributaryMuxAEthernetPort1VtagQosOverIptc OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), false (0), true (1) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 1 contains both an IEEE 802.1p tag and an IP datagram (and both QOS mapping are enabled), this object indicates to map that Ethernet frame to QOS based on IEEE 802.1p tag (true) or based on IP TOS/Traffic Class byte (false). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 70 } tributaryMuxAEthernetPort2VtagQosOverIptc OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), false (0), true (1) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 2 contains both an IEEE 802.1p tag and an IP datagram (and both QOS mapping are enabled), this object indicates to map that Ethernet frame to QOS based on IEEE 802.1p tag (true) or based on IP TOS/Traffic Class byte (false). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 71 } tributaryMuxAEthernetPort1DefaultQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 1 contains neither an IEEE 802.1p tag nor an IP datagram (or both QOS mapping are disabled), this object indicates to map that Ethernet frame to the specified default QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 75 } tributaryMuxAEthernetPort2DefaultQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 2 contains neither an IEEE 802.1p tag nor an IP datagram (or both QOS mapping are disabled), this object indicates to map that Ethernet frame to the specified default QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 76 } tributaryMuxAEthernetVtagMappingQosTable OBJECT-TYPE SYNTAX SEQUENCE OF TributaryMuxAEthernetVtagMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table configures Mux Ethernet IEEE 802.1p tag mapping to QOS. Each IEEE 802.1p priority (0..7) has an associated row for mapping to QOS 'best-effort', 'low', 'medium' or 'high'. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 80 } tributaryMuxAEthernetVtagMappingQosEntry OBJECT-TYPE SYNTAX TributaryMuxAEthernetVtagMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the Tributary 100BT Mux Ethernet IEEE 802.1p mapping to QOS table." INDEX { tributaryMuxAEthernetVtagMappingQosNumber } ::= { tributaryMuxAEthernetVtagMappingQosTable 1 } TributaryMuxAEthernetVtagMappingQosEntry ::= SEQUENCE { tributaryMuxAEthernetVtagMappingQosNumber INTEGER, tributaryMuxAEthernetVtagMappingQosSetting INTEGER } tributaryMuxAEthernetVtagMappingQosNumber OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the tributaryMuxAEthernetVtagMappingQosTable. Its value represents the IEEE 802.1p tag priority (0 through 7)." ::= { tributaryMuxAEthernetVtagMappingQosEntry 1 } tributaryMuxAEthernetVtagMappingQosSetting OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the IEEE 802.1p priority indicated by 'tributaryMuxAEthernetVtagMappingQosNumber' is to be mapped to 'best-effort', 'low', 'medium' or 'high' QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributaryMuxAEthernetVtagMappingQosEntry 2 } tributaryMuxAEthernetIptcgMappingQosTable OBJECT-TYPE SYNTAX SEQUENCE OF TributaryMuxAEthernetIptcgMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table configures Mux Ethernet IP Traffic Class mapping to QOS. Each IPv4 TOS byte or IPv6 TC byte bits 2-7 Traffic Class (0..63) has an associated row for mapping to QOS 'best-effort', 'low', 'medium' or 'high'. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 81 } tributaryMuxAEthernetIptcgMappingQosEntry OBJECT-TYPE SYNTAX TributaryMuxAEthernetIptcgMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the Tributary 100BT Mux Ethernet IP Traffic Class mapping to QOS table." INDEX { tributaryMuxAEthernetIptcgMappingQosNumber } ::= { tributaryMuxAEthernetIptcgMappingQosTable 1 } TributaryMuxAEthernetIptcgMappingQosEntry ::= SEQUENCE { tributaryMuxAEthernetIptcgMappingQosNumber INTEGER, tributaryMuxAEthernetIptcgMappingQosSetting INTEGER } tributaryMuxAEthernetIptcgMappingQosNumber OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the tributaryMuxAEthernetIptcgMappingQosTable. Its value represents the IP Traffic Class (0 through 63)." ::= { tributaryMuxAEthernetIptcgMappingQosEntry 1 } tributaryMuxAEthernetIptcgMappingQosSetting OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the IP Traffic Class indicated by 'tributaryMuxAEthernetIptcgMappingQosNumber' is to be mapped to 'best-effort', 'low', 'medium' or 'high' QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributaryMuxAEthernetIptcgMappingQosEntry 2 } tributaryMuxBEthernetPort1VtagToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 1 frames tagged with IEEE 802.1p priority to Quality-of-Service (QOS). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 110 } tributaryMuxBEthernetPort2VtagToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 2 frames tagged with IEEE 802.1p priority to Quality-of-Service (QOS). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 111 } tributaryMuxBEthernetPort1IptcToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 1 IP packets to Quality-of-Service (QOS) based on bits 2-7 of IPv4 TOS byte or of IPv6 Traffic Class byte. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 115 } tributaryMuxBEthernetPort2IptcToQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables mapping of 100BT Ethernet Port 2 IP packets to Quality-of-Service (QOS) based on bits 2-7 of IPv4 TOS byte or of IPv6 Traffic Class byte. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 116 } tributaryMuxBEthernetPort1VtagQosOverIptc OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), false (0), true (1) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 1 contains both an IEEE 802.1p tag and an IP datagram (and both QOS mapping are enabled), this object indicates to map that Ethernet frame to QOS based on IEEE 802.1p tag (true) or based on IP TOS/Traffic Class byte (false). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 120 } tributaryMuxBEthernetPort2VtagQosOverIptc OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), false (0), true (1) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 2 contains both an IEEE 802.1p tag and an IP datagram (and both QOS mapping are enabled), this object indicates to map that Ethernet frame to QOS based on IEEE 802.1p tag (true) or based on IP TOS/Traffic Class byte (false). Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 121 } tributaryMuxBEthernetPort1DefaultQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 1 contains neither an IEEE 802.1p tag nor an IP datagram (or both QOS mapping are disabled), this object indicates to map that Ethernet frame to the specified default QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 125 } tributaryMuxBEthernetPort2DefaultQos OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When an Ethernet frame received on 100BT Ethernet Port 2 contains neither an IEEE 802.1p tag nor an IP datagram (or both QOS mapping are disabled), this object indicates to map that Ethernet frame to the specified default QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 126 } tributaryMuxBEthernetVtagMappingQosTable OBJECT-TYPE SYNTAX SEQUENCE OF TributaryMuxBEthernetVtagMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table configures Mux Ethernet IEEE 802.1p tag mapping to QOS. Each IEEE 802.1p priority (0..7) has an associated row for mapping to QOS 'best-effort', 'low', 'medium' or 'high'. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 130 } tributaryMuxBEthernetVtagMappingQosEntry OBJECT-TYPE SYNTAX TributaryMuxBEthernetVtagMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the Tributary 100BT Mux Ethernet IEEE 802.1p mapping to QOS table." INDEX { tributaryMuxBEthernetVtagMappingQosNumber } ::= { tributaryMuxBEthernetVtagMappingQosTable 1 } TributaryMuxBEthernetVtagMappingQosEntry ::= SEQUENCE { tributaryMuxBEthernetVtagMappingQosNumber INTEGER, tributaryMuxBEthernetVtagMappingQosSetting INTEGER } tributaryMuxBEthernetVtagMappingQosNumber OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the tributaryMuxBEthernetVtagMappingQosTable. Its value represents the IEEE 802.1p tag priority (0 through 7)." ::= { tributaryMuxBEthernetVtagMappingQosEntry 1 } tributaryMuxBEthernetVtagMappingQosSetting OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the IEEE 802.1p priority indicated by 'tributaryMuxBEthernetVtagMappingQosNumber' is to be mapped to 'best-effort', 'low', 'medium' or 'high' QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributaryMuxBEthernetVtagMappingQosEntry 2 } tributaryMuxBEthernetIptcgMappingQosTable OBJECT-TYPE SYNTAX SEQUENCE OF TributaryMuxBEthernetIptcgMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table configures Mux Ethernet IP Traffic Class mapping to QOS. Each IPv4 TOS byte or IPv6 TC byte bits 2-7 Traffic Class (0..63) has an associated row for mapping to QOS 'best-effort', 'low', 'medium' or 'high'. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { ethernetQOS 131 } tributaryMuxBEthernetIptcgMappingQosEntry OBJECT-TYPE SYNTAX TributaryMuxBEthernetIptcgMappingQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the Tributary 100BT Mux Ethernet IP Traffic Class mapping to QOS table." INDEX { tributaryMuxBEthernetIptcgMappingQosNumber } ::= { tributaryMuxBEthernetIptcgMappingQosTable 1 } TributaryMuxBEthernetIptcgMappingQosEntry ::= SEQUENCE { tributaryMuxBEthernetIptcgMappingQosNumber INTEGER, tributaryMuxBEthernetIptcgMappingQosSetting INTEGER } tributaryMuxBEthernetIptcgMappingQosNumber OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the tributaryMuxBEthernetIptcgMappingQosTable. Its value represents the IP Traffic Class (0 through 63)." ::= { tributaryMuxBEthernetIptcgMappingQosEntry 1 } tributaryMuxBEthernetIptcgMappingQosSetting OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), best-effort (0), low (1), medium (2), high (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the IP Traffic Class indicated by 'tributaryMuxBEthernetIptcgMappingQosNumber' is to be mapped to 'best-effort', 'low', 'medium' or 'high' QOS priority. Available if capacity is 100BT, 100BT+E1, 100BT+DS1, mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix100BT+4E1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1, mix100BT+4DS1. The object is available when Protection is 2+0 only." ::= { tributaryMuxBEthernetIptcgMappingQosEntry 2 } -- Mixed-mode Tributary tributaryMixedMode OBJECT IDENTIFIER ::= { tributary 22 } tributaryMuxEthernetPort1FixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX Ethernet Port 1 Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. The sum of both Ethernet ports fixed capacity and enabled E1/T1 tributaries cannot exceed the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is not 2+0." ::= { tributaryMixedMode 1 } tributaryMuxEthernetPort2FixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX Ethernet Port 2 Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. The sum of both Ethernet ports fixed capacity and enabled E1/T1 tributaries cannot exceed the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is not 2+0." ::= { tributaryMixedMode 2 } tributaryMuxEthernetPort1MaxAllowedFixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies MUX Ethernet Port 1 Maximum-Allowed Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. This value represents the capacity available for Ethernet Port 1 based on the configuration of the enabled E1/T1 tributaries, Ethernet Port 2 fixed capacity, and the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is not 2+0." ::= { tributaryMixedMode 3 } tributaryMuxEthernetPort2MaxAllowedFixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies MUX Ethernet Port 2 Maximum-Allowed Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. This value represents the capacity available for Ethernet Port 2 based on the configuration of the enabled E1/T1 tributaries, Ethernet Port 1 fixed capacity, and the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is not 2+0." ::= { tributaryMixedMode 4 } tributaryMuxAEthernetPort1FixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX A Ethernet Port 1 Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. The sum of both Ethernet ports fixed capacity and enabled E1/T1 tributaries cannot exceed the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is 2+0 only." ::= { tributaryMixedMode 11 } tributaryMuxAEthernetPort2FixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX A Ethernet Port 2 Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. The sum of both Ethernet ports fixed capacity and enabled E1/T1 tributaries cannot exceed the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is 2+0 only." ::= { tributaryMixedMode 12 } tributaryMuxAEthernetPort1MaxAllowedFixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies MUX A Ethernet Port 1 Maximum-Allowed Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. This value represents the capacity available for Ethernet Port 1 based on the configuration of the enabled E1/T1 tributaries, Ethernet Port 2 fixed capacity, and the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is 2+0 only." ::= { tributaryMixedMode 13 } tributaryMuxAEthernetPort2MaxAllowedFixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies MUX A Ethernet Port 2 Maximum-Allowed Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. This value represents the capacity available for Ethernet Port 2 based on the configuration of the enabled E1/T1 tributaries, Ethernet Port 1 fixed capacity, and the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is 2+0 only." ::= { tributaryMixedMode 14 } tributaryMuxBEthernetPort1FixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX B Ethernet Port 1 Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. The sum of both Ethernet ports fixed capacity and enabled E1/T1 tributaries cannot exceed the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is 2+0 only." ::= { tributaryMixedMode 21 } tributaryMuxBEthernetPort2FixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies MUX B Ethernet Port 2 Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. The sum of both Ethernet ports fixed capacity and enabled E1/T1 tributaries cannot exceed the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is 2+0 only." ::= { tributaryMixedMode 22 } tributaryMuxBEthernetPort1MaxAllowedFixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies MUX B Ethernet Port 1 Maximum-Allowed Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. This value represents the capacity available for Ethernet Port 1 based on the configuration of the enabled E1/T1 tributaries, Ethernet Port 2 fixed capacity, and the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is 2+0 only." ::= { tributaryMixedMode 23 } tributaryMuxBEthernetPort2MaxAllowedFixedCapacity OBJECT-TYPE SYNTAX INTEGER ( -1..65 ) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies MUX B Ethernet Port 2 Maximum-Allowed Fixed Capacity. '-1' if not-equipped, '0' if disabled, otherwise a value from 1(xE1) up to 49(xE1) for 'mixSTM1', or a value from 1(xDS1) up to 65(xDS1) for 'mix116DS1'. This value represents the capacity available for Ethernet Port 2 based on the configuration of the enabled E1/T1 tributaries, Ethernet Port 1 fixed capacity, and the available RF capacity e.g. 29 for mix29DS1. Available if capacity is mix2E1, mix4E1, mix8E1, mix16E1, mix4DS1, mix8DS1, mix12DS1, mix16DS1, mix2E3, mix2STM0, mixSTM1, mix29DS1, mix58DS1, mix87DS1, mix100DS1, mix116DS1 and Ethernet port segregration enabled. The object is available when Protection is 2+0 only." ::= { tributaryMixedMode 24 } -- OC3/STM1 Tributary tributarySonet OBJECT IDENTIFIER ::= { tributary 25 } tributarySonetState OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary for OC3/STM1 is disabled or enabled to carry traffic. The object is not available when Protection is 2+0." ::= { tributarySonet 5 } tributarySonetLocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the loopback state of OC3/STM1 MUX. The loopBack is done at the local system, looping the traffic received from the input to be transmitted back to the input (input loopback) or received from the far-end side to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if tributarySonetLocRadioLPBKRmtReq is enabled. The object is not available when Protection is 2+0." ::= { tributarySonet 10 } tributarySonetRmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the remote loopback state if OC3/STM1 mux is present. The remote loopback is done on the remote radio system which is at the far-end of the hop from the radio where the command was issued, taking the traffic received from the local radio and looping it back to be transmitted back to the local radio. The object is not available when Protection is 2+0." ::= { tributarySonet 11 } tributarySonetLocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the local radio loopback state requested by remote site. The loopback is done on the local radio system which is at the near-end of the hop from the radio where the command was issued, taking the traffic received from the remote radio and looping it back to be transmitted back to the remote radio. The object is not available when Protection is 2+0." ::= { tributarySonet 12 } tributaryMuxASonetState OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary for MUX-A OC3/STM1 is disabled or enabled to carry traffic. The object is available when Protection is 2+0 only." ::= { tributarySonet 15 } tributaryMuxASonetLocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the loopback state of MUX A OC3/STM1. The loopBack is done at the local system, looping the traffic received from the input to be transmitted back to the input (input loopback) or received from the far-end side to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if tributaryMuxASonetLocRadioLPBKRmtReq is enabled. The object is available when Protection is 2+0 only." ::= { tributarySonet 20 } tributaryMuxASonetRmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the remote loopback state of MUX A OC3/STM1. The remote loopback is done on the remote radio system which is at the far-end of the hop from the radio where the command was issued, taking the traffic received from the local radio and looping it back to be transmitted back to the local radio. The object is available when Protection is 2+0 only." ::= { tributarySonet 21 } tributaryMuxASonetLocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the local radio loopback state requested by remote site for MUX A. The loopback is done on the local radio system which is at the near-end of the hop from the radio where the command was issued, taking the traffic received from the remote radio and looping it back to be transmitted back to the remote radio." ::= { tributarySonet 22 } tributaryMuxBSonetState OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary for MUX-B OC3/STM1 is disabled or enabled to carry traffic. The object is available when Protection is 2+0 only." ::= { tributarySonet 25 } tributaryMuxBSonetLocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the loopback state of MUX B OC3/STM1. The loopBack is done at the local system, looping the traffic received from the input to be transmitted back to the input (input loopback) or received from the far-end side to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if tributaryMuxBSonetLocRadioLPBKRmtReq is enabled. The object is available when Protection is 2+0 only." ::= { tributarySonet 30 } tributaryMuxBSonetRmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), requested (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the remote loopback state of MUX B OC3/STM1. The remote loopback is done on the remote radio system which is at the far-end of the hop from the radio where the command was issued, taking the traffic received from the local radio and looping it back to be transmitted back to the local radio. The object is available when Protection is 2+0 only." ::= { tributarySonet 31 } tributaryMuxBSonetLocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the local radio loopback state requested by remote site for MUX B. The loopback is done on the local radio system which is at the near-end of the hop from the radio where the command was issued, taking the traffic received from the remote radio and looping it back to be transmitted back to the remote radio." ::= { tributarySonet 32 } -- SUBSTM1 Tributary tributarySubStm1 OBJECT IDENTIFIER ::= { tributary 30 } tributaryMuxRxTUG3Selection OBJECT-TYPE SYNTAX INTEGER { tug3-1 (1), tug3-2 (2), tug3-3 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies for the Partially Filled STM1 MUX the selection of the RX TUG#3. Object is available for the SUB-STM1+E1 capacity." ::= { tributarySubStm1 1 } tributaryMuxTxTUG3Selection OBJECT-TYPE SYNTAX INTEGER { tug3-1 (1), tug3-2 (2), tug3-3 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies for the Partially Filled STM1 MUX the selection of the TX TUG#3. Object is available for the SUB-STM1+E1 capacity." ::= { tributarySubStm1 2 } tributaryMuxARxTUG3Selection OBJECT-TYPE SYNTAX INTEGER { tug3-1 (1), tug3-2 (2), tug3-3 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies for the Partially Filled STM1 MUX A the selection of the RX TUG#3. Object is available for the SUB-STM1+E1 capacity." ::= { tributarySubStm1 3 } tributaryMuxATxTUG3Selection OBJECT-TYPE SYNTAX INTEGER { tug3-1 (1), tug3-2 (2), tug3-3 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies for the Partially Filled STM1 MUX A the selection of the TX TUG#3. Object is available for the SUB-STM1+E1 capacity." ::= { tributarySubStm1 4 } tributaryMuxBRxTUG3Selection OBJECT-TYPE SYNTAX INTEGER { tug3-1 (1), tug3-2 (2), tug3-3 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies for the Partially Filled STM1 MUX B the selection of the RX TUG#3. Object is available for the SUB-STM1+E1 capacity." ::= { tributarySubStm1 5 } tributaryMuxBTxTUG3Selection OBJECT-TYPE SYNTAX INTEGER { tug3-1 (1), tug3-2 (2), tug3-3 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies for the Partially Filled STM1 MUX B the selection of the TX TUG#3. Object is available for the SUB-STM1+E1 capacity." ::= { tributarySubStm1 6 } tributarySubStm1State OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary for the Partially Filled STM1 MUX is disabled or enabled to carry traffic. The object is not available when Protection is 2+0." ::= { tributarySubStm1 11 } tributaryMuxASubStm1State OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary for the Partially Filled STM1 MUX-A is disabled or enabled to carry traffic. The object is available when Protection is 2+0 only." ::= { tributarySubStm1 21 } tributaryMuxBSubStm1State OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary for the Partially Filled STM1 MUX-B is disabled or enabled to carry traffic. The object is available when Protection is 2+0 only." ::= { tributarySubStm1 31 } -- ADM 8DS1/DS3+DS1 Tributary Table tributaryADM8DS1Table OBJECT-TYPE SYNTAX SEQUENCE OF TributaryADM8DS1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table reports ADM 8DS1/DS3+DS1 Tributary characteristics. Each Tributary has an associated row that includes the following: the Tributary number (1 through 8), Add Input Selection, Add Radio Selection, Drop Input Selection, Drop Radio Selection, Drop Direction Switching Mode, and, in the case of MUX A and MUX B, the Drop Direction Status." ::= { tributary 40 } tributaryADM8DS1Entry OBJECT-TYPE SYNTAX TributaryADM8DS1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the ADM 8DS1/DS3+DS1 tributary table." INDEX { tributaryADM8DS1Number } ::= { tributaryADM8DS1Table 1 } TributaryADM8DS1Entry ::= SEQUENCE { tributaryADM8DS1Number INTEGER, tributaryADM8DS1AddInputSelection INTEGER, tributaryADM8DS1AddRadioSelection INTEGER, tributaryADM8DS1DropInputSelection INTEGER, tributaryADM8DS1DropRadioSelection INTEGER, tributaryADM8DS1DropDirectionStatus INTEGER, tributaryADM8DS1DropDirectionSwitchingMode INTEGER, tributaryADM8DS1MuxAAddInputSelection INTEGER, tributaryADM8DS1MuxAAddRadioSelection INTEGER, tributaryADM8DS1MuxADropInputSelection INTEGER, tributaryADM8DS1MuxADropRadioSelection INTEGER, tributaryADM8DS1MuxADropDirectionStatus INTEGER, tributaryADM8DS1MuxADropDirectionSwitchingMode INTEGER, tributaryADM8DS1MuxBAddInputSelection INTEGER, tributaryADM8DS1MuxBAddRadioSelection INTEGER, tributaryADM8DS1MuxBDropInputSelection INTEGER, tributaryADM8DS1MuxBDropRadioSelection INTEGER, tributaryADM8DS1MuxBDropDirectionStatus INTEGER, tributaryADM8DS1MuxBDropDirectionSwitchingMode INTEGER } tributaryADM8DS1Number OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the tributaryADM8DS1Table. Its value represents the Tributary number (1 through 8)." ::= { tributaryADM8DS1Entry 1 } tributaryADM8DS1AddInputSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary indicated by 'tributaryADM8DS1Number' will add to the specified Input timeslot. Disabled is the default value." ::= { tributaryADM8DS1Entry 2 } tributaryADM8DS1AddRadioSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the tributary indicated by 'tributaryADM8DS1Number' will add to the specified Radio timeslot. Disabled is the default value." ::= { tributaryADM8DS1Entry 3 } tributaryADM8DS1DropInputSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the specified Input timeslot will drop data on tributary indicated by 'tributaryADM8DS1Number'. Disabled is the default value." ::= { tributaryADM8DS1Entry 4 } tributaryADM8DS1DropRadioSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the specified Radio timeslot will drop data on tributary indicated by 'tributaryADM8DS1Number'. Disabled is the default value." ::= { tributaryADM8DS1Entry 5 } tributaryADM8DS1DropDirectionStatus OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), radio (0), input (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This status object indicates the direction, input or radio, as the current source of the drop traffic. If the drop input selection is disabled (0) and the drop radio selection is disabled (0), this status will default to radio (0). This object is read-only, it cannot be set." ::= { tributaryADM8DS1Entry 6 } tributaryADM8DS1DropDirectionSwitchingMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), automatic (0), switchToInput (1), switchToRadio (2), lockToInput (3), lockToRadio (4) } ACCESS read-write STATUS mandatory DESCRIPTION "When a tributary has both a non-zero drop input selection and a non-zero drop radio selection, this object specifies the direction, input or radio, as the source for the drop traffic. The default is automatic (0). When set to automatic (0), the direction will switch to the other side only when the AIS signal is detected on the current side. When set to switchToInput (1), the direction is set to input, then this mode is set to automatic (0). When set to switchToRadio (2), the direction is set to radio, then this mode is set to automatic (0). When set to lockToInput (3), the direction is set to input. When set to lockToRadio (4), the direction is set to radio." ::= { tributaryADM8DS1Entry 7 } tributaryADM8DS1MuxAAddInputSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX A tributary indicated by 'tributaryADM8DS1Number' will add to the specified Input timeslot. Disabled is the default value." ::= { tributaryADM8DS1Entry 20 } tributaryADM8DS1MuxAAddRadioSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX A tributary indicated by 'tributaryADM8DS1Number' will add to the specified Radio timeslot. Disabled is the default value." ::= { tributaryADM8DS1Entry 21 } tributaryADM8DS1MuxADropInputSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the specified Input timeslot will drop data on MUX A tributary indicated by 'tributaryADM8DS1Number'. Disabled is the default value." ::= { tributaryADM8DS1Entry 22 } tributaryADM8DS1MuxADropRadioSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the specified Radio timeslot will drop data on MUX A tributary indicated by 'tributaryADM8DS1Number'. Disabled is the default value." ::= { tributaryADM8DS1Entry 23 } tributaryADM8DS1MuxADropDirectionStatus OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), radio (0), input (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This status object indicates for MUX A the direction, input or radio, as the current source of the drop traffic. If the drop input selection is disabled (0) and the drop radio selection is disabled (0), this status will default to radio (0). This object is read-only, it cannot be set." ::= { tributaryADM8DS1Entry 24 } tributaryADM8DS1MuxADropDirectionSwitchingMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), automatic (0), switchToInput (1), switchToRadio (2), lockToInput (3), lockToRadio (4) } ACCESS read-write STATUS mandatory DESCRIPTION "When a tributary for MUX A has both a non-zero drop input selection and a non-zero drop radio selection, this object specifies the direction, input or radio, as the source for the drop traffic. The default is automatic (0). When set to automatic (0), the direction will switch to the other side only when the AIS signal is detected on the current side. When set to switchToInput (1), the direction is set to input, then this mode is set to automatic (0). When set to switchToRadio (2), the direction is set to radio, then this mode is set to automatic (0). When set to lockToInput (3), the direction is set to input. When set to lockToRadio (4), the direction is set to radio." ::= { tributaryADM8DS1Entry 25 } tributaryADM8DS1MuxBAddInputSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX B tributary indicated by 'tributaryADM8DS1Number' will add to the specified Input timeslot. Disabled is the default value." ::= { tributaryADM8DS1Entry 30 } tributaryADM8DS1MuxBAddRadioSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX B tributary indicated by 'tributaryADM8DS1Number' will add to the specified Radio timeslot. Disabled is the default value." ::= { tributaryADM8DS1Entry 31 } tributaryADM8DS1MuxBDropInputSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the specified Input timeslot will drop data on MUX B tributary indicated by 'tributaryADM8DS1Number'. Disabled is the default value." ::= { tributaryADM8DS1Entry 32 } tributaryADM8DS1MuxBDropRadioSelection OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), ts1 (1), ts2 (2), ts3 (3), ts4 (4), ts5 (5), ts6 (6), ts7 (7), ts8 (8), ts9 (9), ts10 (10), ts11 (11), ts12 (12), ts13 (13), ts14 (14), ts15 (15), ts16 (16), ts17 (17), ts18 (18), ts19 (19), ts20 (20), ts21 (21), ts22 (22), ts23 (23), ts24 (24), ts25 (25), ts26 (26), ts27 (27), ts28 (28) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the specified Radio timeslot will drop data on MUX B tributary indicated by 'tributaryADM8DS1Number'. Disabled is the default value." ::= { tributaryADM8DS1Entry 33 } tributaryADM8DS1MuxBDropDirectionStatus OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), radio (0), input (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This status object indicates for MUX B the direction, input or radio, as the current source of the drop traffic. If the drop input selection is disabled (0) and the drop radio selection is disabled (0), this status will default to radio (0). This object is read-only, it cannot be set." ::= { tributaryADM8DS1Entry 34 } tributaryADM8DS1MuxBDropDirectionSwitchingMode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), automatic (0), switchToInput (1), switchToRadio (2), lockToInput (3), lockToRadio (4) } ACCESS read-write STATUS mandatory DESCRIPTION "When a tributary for MUX B has both a non-zero drop input selection and a non-zero drop radio selection, this object specifies the direction, input or radio, as the source for the drop traffic. The default is automatic (0). When set to automatic (0), the direction will switch to the other side only when the AIS signal is detected on the current side. When set to switchToInput (1), the direction is set to input, then this mode is set to automatic (0). When set to switchToRadio (2), the direction is set to radio, then this mode is set to automatic (0). When set to lockToInput (3), the direction is set to input. When set to lockToRadio (4), the direction is set to radio." ::= { tributaryADM8DS1Entry 35 } -- -- Radio group -- radioUnitTable OBJECT-TYPE SYNTAX SEQUENCE OF RadioUnitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table reports RFU characteristics. Each RFU side has an associated row that includes the following: the Tx Power level, RSL, Tx/Rx frequency, Tx/Rx Min/Max frequency, Tx/Rx frequency step and RFU temperature and etc." ::= { radio 1 } radioUnitEntry OBJECT-TYPE SYNTAX RadioUnitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows in the radio unit table" INDEX { radioSide } ::= { radioUnitTable 1 } RadioUnitEntry ::= SEQUENCE { radioSide INTEGER, radioPaTxPower-dBm INTEGER, radioRefTxPower-dBm INTEGER, radioTxStaticAttenMax-dB INTEGER, radioLnaRsl-dBm INTEGER, radioRefRsl-dBm INTEGER, radioRslStatus INTEGER, radioLnaRsl-dBmString DisplayString, radioRefRsl-dBmString DisplayString, radioPaTxPower-dBmString DisplayString, radioRefTxPower-dBmString DisplayString, radioTemperature INTEGER, radioTemperatureMax INTEGER, radioTemperatureRpc INTEGER, radioTxFrequency-kHz INTEGER, radioTxFrequencyCur-kHz INTEGER, radioTxFrequencyMin-kHz INTEGER, radioTxFrequencyMax-kHz INTEGER, radioRxFrequency-kHz INTEGER, radioRxFrequencyCur-kHz INTEGER, radioRxFrequencyMin-kHz INTEGER, radioRxFrequencyMax-kHz INTEGER, radioUnitMuteTx INTEGER, radioCWTone INTEGER, radioTxAcuExtraLoss INTEGER, radioRxAcuExtraLoss INTEGER } radioSide OBJECT-TYPE SYNTAX INTEGER { side-A (1), side-B (2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the radioConfigEntry. Its value represents the radio side (A or B)." ::= { radioUnitEntry 1 } radioPaTxPower-dBm OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the PA Tx Power in 10th of dBm as an integer. A value of -990 indicates that the power is muted." ::= { radioUnitEntry 5 } radioRefTxPower-dBm OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Reference point Tx Power in 10th of dBm as an integer. A value of -990 indicates that the power is muted." ::= { radioUnitEntry 6 } radioTxStaticAttenMax-dB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the maximum value of Tx Signal Static Attenuation in 10th dB as an integer." ::= { radioUnitEntry 7 } radioLnaRsl-dBm OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the LNA port Received Signal Level(RSL) in 10th dBm as an integer." ::= { radioUnitEntry 8 } radioRefRsl-dBm OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Reference point Received Signal Level(RSL) in 10th dBm as an integer." ::= { radioUnitEntry 9 } radioRslStatus OBJECT-TYPE SYNTAX INTEGER { ok (0), low (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Received Signal Level(RSL) status if severity of RSL Low." ::= { radioUnitEntry 10 } radioLnaRsl-dBmString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the LNA port Received Signal Level(RSL) in 10th dBm as an string. See radioLnaRsl-dBm object for value as integer." ::= { radioUnitEntry 11 } radioRefRsl-dBmString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Reference point Received Signal Level(RSL) in 10th dBm as an String. See radioRefRsl-dBm object for value as integer." ::= { radioUnitEntry 12 } radioPaTxPower-dBmString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the PA Tx Power in dBm as a string. Possible string values are: '-1', 'MUTED', or a positive number (as a string). See radioPaTxPower-dBm object for the value as an integer." ::= { radioUnitEntry 13 } radioRefTxPower-dBmString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Reference point Tx Power in dBm as a string. string values are: '-1', 'MUTED', or a positive number (as a string). See radioRefTxPower-dBm object for the value as an integer." ::= { radioUnitEntry 14 } radioTemperature OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Transmitter Temperature in degrees Celsius as an integer." ::= { radioUnitEntry 20 } radioTemperatureMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the maximum level of Transmitter Temperature in degrees Celsius as an integer." ::= { radioUnitEntry 21 } radioTemperatureRpc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the RPC Temperature in degrees Celsius as an integer." ::= { radioUnitEntry 22 } radioTxFrequency-kHz OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the Transmitter Frequency in kHz as an integer." ::= { radioUnitEntry 31 } radioTxFrequencyCur-kHz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the current value of Transmitter Frequency in kHz as an integer." ::= { radioUnitEntry 32 } radioTxFrequencyMin-kHz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is the minimum settable TX frequency [kHz] that can be set for a given NE. The value -1 indicates that this option is not available." ::= { radioUnitEntry 33 } radioTxFrequencyMax-kHz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is the maximum settable TX frequency [kHz] that can be set for a given NE. The value -1 indicates that this option is not available." ::= { radioUnitEntry 34 } radioRxFrequency-kHz OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the Recevier Frequency in kHz as an integer." ::= { radioUnitEntry 35 } radioRxFrequencyCur-kHz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the current value of Receiver Frequency in kHz as an integer." ::= { radioUnitEntry 36 } radioRxFrequencyMin-kHz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is the minimum settable RX frequency [kHz] that can be set for a given NE. The value -1 indicates that this option is not available." ::= { radioUnitEntry 37 } radioRxFrequencyMax-kHz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is the maximum settable RX frequency [kHz] that can be set for a given NE. The value -1 indicates that this option is not available." ::= { radioUnitEntry 38 } radioUnitMuteTx OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), clear (0), set (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used as control for Transmitter A or B mute. This is a Dangerous Control. Setting it will cause a loss of communication with the remote site because it will automatically be cleared when the systemDangerousControlTimeout object timer expires. The value NOT-EQUIPPED is read-only and identifies that the specified RFU is not equipped." ::= { radioUnitEntry 40 } radioCWTone OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), clear (0), set (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This table object specifies if the CWTone is set or not for RFU A or B. This is a Dangerous Control. Setting it will cause a loss of communication with the remote site because it will automatically be cleared when the systemDangerousControlTimeout object timer expires. The value NOT-EQUIPPED is read-only and identifies that the specified RFU is not equipped." ::= { radioUnitEntry 41 } radioTxAcuExtraLoss OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Tx ACU Loss in 10th of dB." ::= { radioUnitEntry 50 } radioRxAcuExtraLoss OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Rx ACU Loss in 10th of dB." ::= { radioUnitEntry 51 } -- TPC radioTpc OBJECT IDENTIFIER ::= { radio 5 } tpcMode OBJECT-TYPE SYNTAX INTEGER { manual (0), atpc (1), dtpc (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used as control for TPC mode." ::= { radioTpc 1 } tpcTxStaticAttenuationA OBJECT-TYPE SYNTAX INTEGER { dB-0 (0), dB-05 (5), dB-10 (10), dB-15 (15), dB-20 (20), dB-25 (25), dB-30 (30), dB-35 (35), dB-40 (40), dB-45 (45), dB-50 (50), dB-55 (55), dB-60 (60), dB-65 (65), dB-70 (70), dB-75 (75), dB-80 (80), dB-85 (85), dB-90 (90), dB-95 (95), dB-100 (100), dB-105 (105), dB-110 (110), dB-115 (115), dB-120 (120), dB-125 (125), dB-130 (130), dB-135 (135), dB-140 (140), dB-145 (145), dB-150 (150), dB-155 (155), dB-160 (160), dB-165 (165), dB-170 (170), dB-175 (175), dB-180 (180), dB-185 (185), dB-190 (190), dB-195 (195), dB-200 (200), dB-205 (205), dB-210 (210), dB-215 (215), dB-220 (220), dB-225 (225), dB-230 (230), dB-235 (235), dB-240 (240), dB-245 (245), dB-250 (250), dB-255 (255), dB-260 (260), dB-265 (265), dB-270 (270), dB-275 (275), dB-280 (280), dB-285 (285), dB-290 (290), dB-295 (295), dB-300 (300), dB-305 (305), dB-310 (310), dB-315 (315), dB-320 (320), dB-325 (325), dB-330 (330), dB-335 (335), dB-340 (340), dB-345 (345), dB-350 (350), dB-355 (355), dB-360 (360), dB-365 (365), dB-370 (370), dB-375 (375), dB-380 (380), dB-385 (385), dB-390 (390), dB-395 (395), dB-400 (400) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies TPC Static Attenuation value for RFU A. Values are in 10th of dB. For example, for 10 dB of attenuation, select dB-100" ::= { radioTpc 2 } tpcTxStaticAttenuationB OBJECT-TYPE SYNTAX INTEGER { dB-0 (0), dB-05 (5), dB-10 (10), dB-15 (15), dB-20 (20), dB-25 (25), dB-30 (30), dB-35 (35), dB-40 (40), dB-45 (45), dB-50 (50), dB-55 (55), dB-60 (60), dB-65 (65), dB-70 (70), dB-75 (75), dB-80 (80), dB-85 (85), dB-90 (90), dB-95 (95), dB-100 (100), dB-105 (105), dB-110 (110), dB-115 (115), dB-120 (120), dB-125 (125), dB-130 (130), dB-135 (135), dB-140 (140), dB-145 (145), dB-150 (150), dB-155 (155), dB-160 (160), dB-165 (165), dB-170 (170), dB-175 (175), dB-180 (180), dB-185 (185), dB-190 (190), dB-195 (195), dB-200 (200), dB-205 (205), dB-210 (210), dB-215 (215), dB-220 (220), dB-225 (225), dB-230 (230), dB-235 (235), dB-240 (240), dB-245 (245), dB-250 (250), dB-255 (255), dB-260 (260), dB-265 (265), dB-270 (270), dB-275 (275), dB-280 (280), dB-285 (285), dB-290 (290), dB-295 (295), dB-300 (300), dB-305 (305), dB-310 (310), dB-315 (315), dB-320 (320), dB-325 (325), dB-330 (330), dB-335 (335), dB-340 (340), dB-345 (345), dB-350 (350), dB-355 (355), dB-360 (360), dB-365 (365), dB-370 (370), dB-375 (375), dB-380 (380), dB-385 (385), dB-390 (390), dB-395 (395), dB-400 (400) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies TPC Static Attenuation value for RFU A. Values are in 10th of dB. For example, for 10 dB of attenuation, select dB-100" ::= { radioTpc 3 } tpcNominalRemRsl-dBm OBJECT-TYPE SYNTAX INTEGER (-70..-20) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies DTPC Target RSL in dBm." ::= { radioTpc 4 } tpcBoostStep-dB OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies ATPC boost step in dB." ::= { radioTpc 5 } tpcAtpcRemRslLowThresholdOffset-dB OBJECT-TYPE SYNTAX INTEGER (0..25) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies offset of ATPC low threshold from the system threshold. The offset is sent to remote radio. Values are in unit of dB" ::= { radioTpc 7 } tpcMaxExceedTimePercent OBJECT-TYPE SYNTAX INTEGER { percent-0 (0), percent-1E-2 (1), percent-2E-2 (2), percent-3E-2 (3), percent-4E-2 (4), percent-5E-2 (5), percent-6E-2 (6), percent-7E-2 (7), percent-8E-2 (8), percent-9E-2 (9), percent-1E-1 (10), percent-2E-1 (20), percent-3E-1 (30), percent-4E-1 (40), percent-5E-1 (50), percent-6E-1 (60), percent-7E-1 (70), percent-8E-1 (80), percent-9E-1 (90), percent-1 (100), percent-2 (200), percent-3 (300), percent-4 (400), percent-5 (500), percent-6 (600), percent-7 (700), percent-8 (800), percent-9 (900), percent-10 (1000), percent-20 (2000), percent-30 (3000), percent-40 (4000), percent-50 (5000), percent-60 (6000), percent-70 (7000), percent-80 (8000), percent-90 (9000), percent-100 (10000) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies ATPC Max Exceed Time value percentage. Default value is 100." ::= { radioTpc 8 } tpcExceedTimePercent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "This object shows percentage of time which is over coordinated transmit power as a string." ::= { radioTpc 9 } tpcElapsedTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "This object shows Elapsed Time value for TPC." ::= { radioTpc 10 } tpcResetTpcStatistic OBJECT-TYPE SYNTAX INTEGER { execute (1) } ACCESS write-only STATUS mandatory DESCRIPTION "This object resets the TPC elapsed time and percentage for exceeding coordinated power to zero." ::= { radioTpc 11 } tpcTxCoordinatedAttenuationA-dB OBJECT-TYPE SYNTAX INTEGER (0..25) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the RFU A coordinated attenuation in dB." ::= { radioTpc 12 } tpcTxCoordinatedAttenuationB-dB OBJECT-TYPE SYNTAX INTEGER (0..25) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the RFU B coordinated attenuation in dB." ::= { radioTpc 13 } radioRssiOutputPolarity OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), propotional (0), inverted (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies RSSI Output Polarity if at least of RFU is present." ::= { radio 20 } -- -- Wayside group -- wayside1Code OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), b8zs(0), ami (1), hdb3(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside Channel 1 Code. Its value may be B8ZS, HDB3 or AMI. Available only if System capacity is OC-3, 3DS3-3DS1, 100BT+DS1 or E3+E1. If Wayside mode is T1 rate then available choices are B8ZS and AMI. If Wayside mode is E1 rate then the only available choice is HDB3. For E3/DS3/100BT card: Only B8ZS and AMI choices are available. For OC3 it is available only if wayside mode is E1, in which case, the only available choice is HDB3. The object is not available when Protection is 2+0." ::= { wayside 2 } wayside1Equalizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), from0to133 (0), from133to266 (4), from266to399 (2), from399to533 (6), from533to655 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside Cahnnel 1 line length equalizer. This object available only if System capacity is OC-3 or DS3+DS1 or 3DS3+3DS1 or 100BT+DS1 or 28DS1+DS1 and wayside mode is DS1 rate. The object is not available when Protection is 2+0." ::= { wayside 3 } wayside1Termination OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unbalanced-75 (0), balanced-120 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside Cahnnel 1 terination type. This object available only if System capacity is OC-3 or 100BT+E1 or E3+E1 and wayside mode is E1 rate. The object is not available when Protection is 2+0." ::= { wayside 4 } wayside1LocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside's tributary local loopback. The Input loopback is done at the local system to which the command was applied, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end side to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if wayside1LocRadioLPBKRmtReq is enabled. The object is not available when Protection is 2+0." ::= { wayside 5 } wayside1RmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls the Wayside's tributary remote radio loopback. It may be DISABLED or ENABLED. The Radio loopback is done at the remote radio system to which the command was applied, looping the traffic received from the local-end to be transmitted back to the local-end radio. The object is not available when Protection is 2+0." ::= { wayside 6 } wayside1LocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Wayside's tributary local radio loopback requested by remote site. It may be DISABLED or ENABLED. The Radio loopback is done at the local radio system to which the command was applied, looping the traffic received from the far-end to be transmitted back to the far-end radio. The object is not available when Protection is 2+0." ::= { wayside 7 } wayside1State OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the wayside 1 is disabled or enabled to carry data. Available only if System capacity is 3DS3-3DS1, 21E1+E1, 28DS1+DS1, 100BT+WS, E3+E1." ::= { wayside 8 } wayside2Code OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), b8zs(0), ami (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside Channel 2 Code. Its value may be B8ZS or AMI. Available only if System capacity is 3DS3-3DS1." ::= { wayside 9 } wayside2Equalizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), from0to133 (0), from133to266 (4), from266to399 (2), from399to533 (6), from533to655 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside Cahnnel 2 line length equalizer. This object available only if System capacity is 3DS3-3DS1." ::= { wayside 10 } wayside2LocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (1), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside's tributary local loopback. The Input loopback is done at the local system to which the command was applied, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end side to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if wayside2LocRadioLPBKRmtReq is enabled." ::= { wayside 11 } wayside2RmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls the Wayside's tributary remote radio loopback. It may be DISABLED or ENABLED. The Radio loopback is done at the remote radio system to which the command was applied, looping the traffic received from the local-end to be transmitted back to the local-end radio." ::= { wayside 12 } wayside2LocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Wayside's tributary local radio loopback requested by remote site. It may be DISABLED or ENABLED. The Radio loopback is done at the local radio system to which the command was applied, looping the traffic received from the far-end to be transmitted back to the far-end radio." ::= { wayside 13 } wayside2State OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the wayside 2 is disabled or enabled to carry data. Available only if System capacity is 3DS3-3DS1." ::= { wayside 14 } wayside3Code OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), b8zs(0), ami (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside Channel 3 Code. Its value may be B8ZS or AMI. Available only if System capacity is 3DS3-3DS1." ::= { wayside 15 } wayside3Equalizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), from0to133 (0), from133to266 (4), from266to399 (2), from399to533 (6), from533to655 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside Cahnnel 3 line length equalizer. This object available only if System capacity is 3DS3-3DS1." ::= { wayside 16 } wayside3LocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (1), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the Wayside's tributary local loopback. The Input loopback is done at the local system to which the command was applied, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end side to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if wayside3LocRadioLPBKRmtReq is enabled." ::= { wayside 17 } wayside3RmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls the Wayside's tributary remote radio loopback. It may be DISABLED or ENABLED. The Radio loopback is done at the remote radio system to which the command was applied, looping the traffic received from the local-end to be transmitted back to the local-end radio." ::= { wayside 18 } wayside3LocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Wayside's tributary local radio loopback requested by remote site. It may be DISABLED or ENABLED. The Radio loopback is done at the local radio system to which the command was applied, looping the traffic received from the far-end to be transmitted back to the far-end radio." ::= { wayside 19 } wayside3State OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the wayside 3 is disabled or enabled to carry data. Available only if System capacity is 3DS3-3DS1." ::= { wayside 20 } wayside1MuxACode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), b8zs(0), ami (1), hdb3(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the MUX A Wayside Channel 1 Code. It may be B8ZS, HDB3 or AMI. Available only if System Capacity is OC-3, 100BT+DS1 or E3+E1. If Wayside mode is T1 rate then available choices are B8ZS and AMI. If Wayside mode is E1 rate then the only available choice is HDB3. For E3/100BT card: Only B8ZS and AMI choices are available. For OC3 it is available only if wayside mode is E1, in which case, the only available choice is HDB3. The object is available when Protection is 2+0 only." ::= { wayside 32 } wayside1MuxAEqualizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), from0to133 (0), from133to266 (4), from266to399 (2), from399to533 (6), from533to655 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the MUX A Wayside Cahnnel 1 line length equalizer. This object available only if System Capacity is OC-3, 100BT+T1 or 28T1+WS and wayside mode is DS1 rate. The object is available when Protection is 2+0 only." ::= { wayside 33 } wayside1MuxATermination OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unbalanced-75 (0), balanced-120 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the MUX A Wayside Cahnnel 1 terination type. This object available only if System capacity is OC-3, 100BT+E1, E3+E1 and wayside mode is E1 rate. The object is available when Protection is 2+0 only." ::= { wayside 34 } wayside1MuxALocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the MUX A Wayside's tributary local loopback. The Input loopback is done at the local system to which the command was applied, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end side to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if wayside1MuxALocRadioLPBKRmtReq is enabled. The object is available when Protection is 2+0 only." ::= { wayside 35 } wayside1MuxARmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls the MUX A Wayside's tributary remote radio loopback. It may be DISABLED or ENABLED. The Radio loopback is done at the remote radio system to which the command was applied, looping the traffic received from the local-end to be transmitted back to the local-end radio. The object is available when Protection is 2+0 only." ::= { wayside 36 } wayside1MuxALocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the MUX A Wayside's tributary local radio loopback requested by remote site. It may be DISABLED or ENABLED. The Radio loopback is done at the local radio system to which the command was applied, looping the traffic received from the far-end to be transmitted back to the far-end radio. The object is available when Protection is 2+0 only." ::= { wayside 37 } wayside1MuxAState OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX A Wayside 1 is disabled or enabled to carry data. Available only if System capacity is 21E1+E1, 28DS1+DS1, 100BT+WS or E3+E1. The object is available when Protection is 2+0 only." ::= { wayside 38 } wayside1MuxBCode OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), b8zs(0), ami (1), hdb3(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the MUX B Wayside Channel 1 Code. It may be B8ZS, HDB3 or AMI. Available only if System Capacity is OC-3, 100BT+DS1 or E3+E1. If Wayside mode is T1 rate then available choices are B8ZS and AMI. If Wayside mode is E1 rate then the only available choice is HDB3. For E3/100BT card: Only B8ZS and AMI choices are available. For OC3 it is available only if wayside mode is E1, in which case, the only available choice is HDB3. The object is available when Protection is 2+0 only." ::= { wayside 42 } wayside1MuxBEqualizer OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), from0to133 (0), from133to266 (4), from266to399 (2), from399to533 (6), from533to655 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the MUX B Wayside Cahnnel 1 line length equalizer. This object available only if System Capacity is OC-3, 100BT+T1 or 28T1+WS and wayside mode is DS1 rate. The object is available when Protection is 2+0 only." ::= { wayside 43 } wayside1MuxBTermination OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unbalanced-75 (0), balanced-120 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the MUX B Wayside Cahnnel 1 terination type. This object available only if System capacity is OC-3, 100BT+E1, E3+E1 and wayside mode is E1 rate. The object is available when Protection is 2+0 only." ::= { wayside 44 } wayside1MuxBLocLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled-radio-lpbk (2), enabled-input-lpbk (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls the MUX B Wayside's tributary local loopback. The Input loopback is done at the local system to which the command was applied, looping the traffic received from input to be transmitted back to the input (input loopback) or received from the far-end side to be transmitted back to the far-end of the hop (radio loopback). This object is unequipped if wayside1MuxBLocRadioLPBKRmtReq is enabled. The object is available when Protection is 2+0 only." ::= { wayside 45 } wayside1MuxBRmtRadioLPBK OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls the MUX B Wayside's tributary remote radio loopback. It may be DISABLED or ENABLED. The Radio loopback is done at the remote radio system to which the command was applied, looping the traffic received from the local-end to be transmitted back to the local-end radio. The object is available when Protection is 2+0 only." ::= { wayside 46 } wayside1MuxBLocRadioLPBKRmtReq OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),disabled (0), enabled (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the MUX B Wayside's tributary local radio loopback requested by remote site. It may be DISABLED or ENABLED. The Radio loopback is done at the local radio system to which the command was applied, looping the traffic received from the far-end to be transmitted back to the far-end radio. The object is available when Protection is 2+0 only." ::= { wayside 47 } wayside1MuxBState OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), disabled (0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether the MUX B Wayside 1 is disabled or enabled to carry data. Available only if System capacity is 21E1+E1, 28DS1+DS1, 100BT+WS or E3+E1. The object is available when Protection is 2+0 only." ::= { wayside 48 } -- -- The Performance Group -- ber OBJECT IDENTIFIER ::= { performance 1 } performanceBERTrigger OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1),stop (0), run (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls the BER Performance Measurement. Its value may be STOP or RUN. When the BER Performance Measurement is RUN, the time will be reset and start to be counted (see performanceBERTime), and the BER will be reset and measured. When the BER Measurement is STOPPED, the time and BER will stop from being measured, but they will retain their values until the Measurement is started again." ::= { ber 1 } performanceBERTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the duration of the current or most recent BER Performance test in the format xxdxxhxx:xx. The time is measured from when the BER Performance test is started (RUN) until it is STOP (using performanceBERTrigger to start and stop it)." ::= { ber 2 } performanceBER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Corrected BER value with the following format X.XE-XX. It is based on parity errors. The CBER value is measured over the duration of the system BER Performance Measurement test. The test is RUN and STOP using performanceBERTrigger, and the elapsed time isgiven by performanceBERTime. The object is available when Protection is not 2+0." ::= { ber 3 } performanceMuxABER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Corrected BER value for MUX A traffic with the following format X.XE-XX. It is based on parity errors. The CBER value is measured over the duration of the system BER Performance Measurement test. The test is RUN and STOP using performanceBERTrigger, and the elapsed time isgiven by performanceBERTime. The object is available when Protection is 2+0 only." ::= { ber 8 } performanceMuxBBER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Corrected BER value for MUX B traffic with the following format X.XE-XX. It is based on parity errors. The CBER value is measured over the duration of the system BER Performance Measurement test. The test is RUN and STOP using performanceBERTrigger, and the elapsed time isgiven by performanceBERTime. The object is available when Protection is 2+0 only." ::= { ber 9 } -- -- G826/828 Parameters subsection -- g826-g828 OBJECT IDENTIFIER ::= { performance 5 } performanceG826G828Reset OBJECT-TYPE SYNTAX INTEGER { not-reset(0), reset(1) } ACCESS write-only STATUS mandatory DESCRIPTION "This write-only object resets Error Second performance. The Current values will become the Latched values, and then Current values will be reset." ::= { g826-g828 1 } g826-g828-Current OBJECT IDENTIFIER ::= { g826-g828 2 } performanceCurrentET OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Elapsed Time in format XXd:YYh MM:SS since the last Error Second performance reset." ::= { g826-g828-Current 1 } performanceCurrentUNAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds. The object is available when Protection is not 2+0." ::= { g826-g828-Current 2 } performanceCurrentAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Available seconds. The object is available when Protection is not 2+0." ::= { g826-g828-Current 3 } performanceCurrentEFS OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds. The object is available when Protection is not 2+0." ::= { g826-g828-Current 4 } performanceCurrentES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds. The object is available when Protection is not 2+0." ::= { g826-g828-Current 5 } performanceCurrentSES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds. The object is available when Protection is not 2+0." ::= { g826-g828-Current 6 } performanceCurrentSEP OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period in seconds. The object is available when Protection is not 2+0." ::= { g826-g828-Current 7 } performanceCurrentEFSR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds ratio (in %) as a string. The object is available when Protection is not 2+0." ::= { g826-g828-Current 8 } performanceCurrentESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds ratio (in %) as a string. The object is available when Protection is not 2+0." ::= { g826-g828-Current 9 } performanceCurrentSESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds ratio (in %) as a string. The object is available when Protection is not 2+0." ::= { g826-g828-Current 10 } performanceCurrentUNAVR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds ratio (in %) as a string. The object is available when Protection is not 2+0." ::= { g826-g828-Current 11 } performanceCurrentBBER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors ratio (in %) as a string. The object is available when Protection is not 2+0." ::= { g826-g828-Current 12 } performanceCurrentSEPI OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period intensity. The object is available when Protection is not 2+0." ::= { g826-g828-Current 13 } performanceCurrentBBE OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors. The object is available when Protection is not 2+0." ::= { g826-g828-Current 14 } performanceMuxACurrentUNAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 22 } performanceMuxACurrentAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Available seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 23 } performanceMuxACurrentEFS OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 24 } performanceMuxACurrentES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 25 } performanceMuxACurrentSES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 26 } performanceMuxACurrentSEP OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period in seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 27 } performanceMuxACurrentEFSR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 28 } performanceMuxACurrentESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 29 } performanceMuxACurrentSESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 30 } performanceMuxACurrentUNAVR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 31 } performanceMuxACurrentBBER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 32 } performanceMuxACurrentSEPI OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period intensity (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 33 } performanceMuxACurrentBBE OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 34 } performanceMuxBCurrentUNAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 42 } performanceMuxBCurrentAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Available seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 43 } performanceMuxBCurrentEFS OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 44 } performanceMuxBCurrentES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 45 } performanceMuxBCurrentSES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 46 } performanceMuxBCurrentSEP OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period in seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 47 } performanceMuxBCurrentEFSR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 48 } performanceMuxBCurrentESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 49 } performanceMuxBCurrentSESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 50 } performanceMuxBCurrentUNAVR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 51 } performanceMuxBCurrentBBER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 52 } performanceMuxBCurrentSEPI OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period intensity (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 53 } performanceMuxBCurrentBBE OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Current 54 } g826-g828-Latched OBJECT IDENTIFIER ::= { g826-g828 3 } performanceLatchedET OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Elapsed Time in format XXd:YYh MM:SS since the last Error Second performance reset." ::= { g826-g828-Latched 1 } performanceLatchedUNAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 2 } performanceLatchedAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Available seconds. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 3 } performanceLatchedEFS OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 4 } performanceLatchedES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 5 } performanceLatchedSES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 6 } performanceLatchedSEP OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period in seconds. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 7 } performanceLatchedEFSR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds ratio (in %) as a string. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 8 } performanceLatchedESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds ratio (in %) as a string. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 9 } performanceLatchedSESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds ratio (in %) as a string. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 10 } performanceLatchedUNAVR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds ratio (in %) as a string. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 11 } performanceLatchedBBER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors ratio (in %) as a string. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 12 } performanceLatchedSEPI OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period intensity. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 13 } performanceLatchedBBE OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors. The object is not available when Protection is 2+0." ::= { g826-g828-Latched 14 } performanceMuxALatchedUNAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 22 } performanceMuxALatchedAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Available seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 23 } performanceMuxALatchedEFS OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 24 } performanceMuxALatchedES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 25 } performanceMuxALatchedSES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 26 } performanceMuxALatchedSEP OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period in seconds (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 27 } performanceMuxALatchedEFSR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 28 } performanceMuxALatchedESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 29 } performanceMuxALatchedSESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 30 } performanceMuxALatchedUNAVR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 31 } performanceMuxALatchedBBER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors ratio (in %) as a string (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 32 } performanceMuxALatchedSEPI OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period intensity (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 33 } performanceMuxALatchedBBE OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors (Mux A). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 34 } performanceMuxBLatchedUNAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 42 } performanceMuxBLatchedAV OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Available seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 43 } performanceMuxBLatchedEFS OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 44 } performanceMuxBLatchedES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 45 } performanceMuxBLatchedSES OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 46 } performanceMuxBLatchedSEP OBJECT-TYPE SYNTAX INTEGER (0..1727999) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period in seconds (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 47 } performanceMuxBLatchedEFSR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Error free seconds ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 48 } performanceMuxBLatchedESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Errored seconds ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 49 } performanceMuxBLatchedSESR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored seconds ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 50 } performanceMuxBLatchedUNAVR OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Unavailable seconds ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 51 } performanceMuxBLatchedBBER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors ratio (in %) as a string (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 52 } performanceMuxBLatchedSEPI OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Severely errored period intensity (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 53 } performanceMuxBLatchedBBE OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Background Block Errors (Mux B). The object is available when Protection is 2+0 only." ::= { g826-g828-Latched 54 } -- Opt Card performance optCardStatistics OBJECT IDENTIFIER ::= { performance 10 } statisticG703V11TxFifoFullCounterOpt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 1 is not able sending data on network fast enought to follow the user equipment so some of the data is lost. -1 value indicates that if Card in slot 1 has other type then G.703/V11." ::= { optCardStatistics 11 } statisticG703V11RxFifoFullCounterOpt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 1 is not able sending data on the Rx stream forwards the user equipment fast enought so some of the data received from other side of circuit emullation tunnel is lost. -1 value indicates that if Card in slot 1 has other type then G.703/V11." ::= { optCardStatistics 12 } statisticG703V11TxFifoEmptyCounterOpt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 1 is not receiving data from the user interface fast enought to keep continuity of asyncronous circuit emullation tunnel. -1 value indicates that if Card in slot 1 has other type then G.703/V11." ::= { optCardStatistics 13 } statisticG703V11RxFifoEmptyCounterOpt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 1 is stops sending data on the Rx stream forwards the user equipment because data was not received fast enought from other side of circuit emullation tunnel. -1 value indicates that if Card in slot 1 has other type then G.703/V11." ::= { optCardStatistics 14 } statisticG703V11TxClockFailCounterOpt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 1 doesn't receive a Tx Clock signal within tolerances from the user interface. -1 value indicates that if Card in slot 1 has other type then G.703/V11." ::= { optCardStatistics 15 } statisticG703V11FifoCounterOpt1Reset OBJECT-TYPE SYNTAX INTEGER { not-reset(0), reset(1) } ACCESS write-only STATUS mandatory DESCRIPTION "This write-only object resets the statistic counters to zero for the G.703/V11 Opt Card 1." ::= { optCardStatistics 17 } statisticG703V11TxFifoFullCounterOpt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 2 is not able sending data on network fast enought to follow the user equipment so some of the data is lost. -1 value indicates that if Card in slot 2 has other type then G.703/V11." ::= { optCardStatistics 21 } statisticG703V11RxFifoFullCounterOpt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 2 is not able sending data on the Rx stream forwards the user equipment fast enought so some of the data received from other side of circuit emullation tunnel is lost. -1 value indicates that if Card in slot 2 has other type then G.703/V11." ::= { optCardStatistics 22 } statisticG703V11TxFifoEmptyCounterOpt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 2 is not receiving data from the user interface fast enought to keep continuity of asyncronous circuit emullation tunnel. -1 value indicates that if Card in slot 1 has other type then G.703/V11." ::= { optCardStatistics 23 } statisticG703V11RxFifoEmptyCounterOpt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 2 is stops sending data on the Rx stream forwards the user equipment because data was not received fast enought from other side of circuit emullation tunnel. -1 value indicates that if Card in slot 1 has other type then G.703/V11." ::= { optCardStatistics 24 } statisticG703V11TxClockFailCounterOpt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is increased by 1 each time the Opt Card 2 doesn't receive a Tx Clock signal within tolerances from the user interface. -1 value indicates that if Card in slot 2 has other type then G.703/V11." ::= { optCardStatistics 25 } statisticG703V11FifoCounterOpt2Reset OBJECT-TYPE SYNTAX INTEGER { not-reset(0), reset(1) } ACCESS write-only STATUS mandatory DESCRIPTION "This write-only object resets the statistic counters to zero for the G.703/V11 Opt Card 2." ::= { optCardStatistics 27 } -- -- The Network Management Group -- -- Net Netcom Config netNetcom OBJECT IDENTIFIER ::= { net 5 } netNetcomIpInterface OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls whether Netcom Interface is ENABLED or DISABLED." ::= { netNetcom 1 } netNetcomIpAddrMode OBJECT-TYPE SYNTAX INTEGER { manual (0), auto (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls Netcom Ip address setup mode" ::= { netNetcom 2 } netNetcomIpAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Netcom Interface IP Address." ::= { netNetcom 3 } netNetcomIpMask OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Netcom Interface IP Mask." ::= { netNetcom 4 } netManualNetcomIpAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the Netcom Interface IP Address, which is specified as a static IP address. This object has read-only access in AUTO mode." ::= { netNetcom 5 } netManualNetcomIpMask OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the Netcom Interface IP Mask. This object has read-only access in AUTO mode." ::= { netNetcom 6 } netNetcomOverEthernet OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls whether Netcom is ENABLED or DISABLED over the ETHERNET interface. It is enabled by default." ::= { netNetcom 7 } netNetcomOverHdlc OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls whether Netcom is ENABLED or DISABLED over the HDLC." ::= { netNetcom 8 } -- Net Ethernet Config netEthernet OBJECT IDENTIFIER ::= { net 6 } netEthernetIpInterface OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls whether Ethernet Interface is ENABLED or DISABLED." ::= { netEthernet 1 } netEthernetIpAddrMode OBJECT-TYPE SYNTAX INTEGER { manual (0), auto (1), dhcp (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls Ethernet Ip address setup mode" ::= { netEthernet 2 } netEthernetIpAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Ethernet Interface IP Address, which is currently in use." ::= { netEthernet 3 } netEthernetIpMask OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Ethernet Interface IP Mask, which is currently in use." ::= { netEthernet 4 } netManualEthernetIpAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the Ethernet Interface IP Address, which is specified as a static IP address. This object has read-only access in AUTO or DHCP mode." ::= { netEthernet 5 } netManualEthernetIpMask OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the Ethernet Interface IP Mask, which is specified as a static IP mask. This object has read-only access in AUTO or DHCP mode." ::= { netEthernet 6 } -- Net IP Routing netIPRouting OBJECT IDENTIFIER ::= { net 10 } netIpRipMode OBJECT-TYPE SYNTAX INTEGER { disable (0), ver2broadcast (2), ver2multicast (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the RIP mode, which may be DISABLE, VER2BROADCAST, or VER2MULTICAST. The meaning of these values is as follows: - DISABLE: The RIP protocol is disabled. - VER2BROADCAST: The RIP protocol is in RIP-2 mode and updates are sent via IP broadcast to the local subnet. This is the default mode of operation in order to maintain compatibility with older Harris radios which do not support RIP-2 multicast mode. - VER2MULTICAST: The RIP protocol is in RIP-2 mode and updates are sent using the RIP-2 multicast address 224.0.0.9." ::= { netIPRouting 5 } netIpRipOverEthernet OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls whether RIP is ENABLED or DISABLED over the ETHERNET interface." ::= { netIPRouting 10 } netIpRipOverNetcom OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls whether RIP is ENABLED or DISABLED over the NETCOM IP interface." ::= { netIPRouting 15 } netIpDHCPSEnable OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enable or disable DHCP server." ::= { netIPRouting 16 } netIpDHCPAddressRangeStart OBJECT-TYPE SYNTAX INTEGER (2..254) ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the start address for the range of DHCP addresses being served. Allowed value is between 2 and 254, but not more then value of netIpDHCPAddressRangeEnd object. Note that the ranges will be checked in the config point validation routines to ensure that the range is valid for the Ethernet IP address and the subnet mask on the ethernet." ::= { netIPRouting 17 } netIpDHCPAddressRangeEnd OBJECT-TYPE SYNTAX INTEGER (2..254) ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the last address for the range of DHCP addresses being served. Allowed value is between 2 and 254, but not less then value of netIpDHCPAddressRangeStart object. Note that the ranges will be checked in the config point validation routines to ensure that the range is valid for the Ethernet IP address and the subnet mask on the ethernet." ::= { netIPRouting 18 } netIpDefaultRouter OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Default Router IP Address." ::= { netIPRouting 20 } netIpDHCPDefaultRouter OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies Default Router IP Address for DHCP mode." ::= { netIPRouting 21 } netIpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF NetIpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Static IP Route Table definition." ::= { netIPRouting 25 } netIpRouteEntry OBJECT-TYPE SYNTAX NetIpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows of the IP Route Table." INDEX { netIpRouteNumber } ::= { netIpRouteTable 1 } NetIpRouteEntry ::= SEQUENCE { netIpRouteNumber INTEGER, netIpRouteAddress DisplayString, netIpRouteMask DisplayString, netIpNextRouter DisplayString, netIpRouteStatus INTEGER } netIpRouteNumber OBJECT-TYPE SYNTAX INTEGER ( 1..10 ) ACCESS not-accessible STATUS mandatory DESCRIPTION "Number of route. Used as index in Routing Table." ::= { netIpRouteEntry 1 } netIpRouteAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the IP address of the subnetwork. Subnetwork is an entry in the static routing table. The empty or 'empty' string as IP address disables this static entry." ::= { netIpRouteEntry 2 } netIpRouteMask OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the IP mask of the subnetwork. Subnetwork is an entry in the static routing table." ::= { netIpRouteEntry 3 } netIpNextRouter OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the next router to reach ipAddress" ::= { netIpRouteEntry 4 } netIpRouteStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to indicate if the entry having the same netIpRouteNumber is enabled or disabled. The possible values are: disable = the route record inside netIpRouteTable will be ignored; otherwise enable = the record inside netIpRouteTable will be used for routing." ::= { netIpRouteEntry 5 } netIpForwarding OBJECT-TYPE SYNTAX INTEGER { host (2), router (1) } ACCESS read-write STATUS mandatory DESCRIPTION "The objects indicates of whether this equipment is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this equipment." ::= { netIPRouting 30 } netIpRipDistributeLocalStaticRoutes OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls whether to distribute static routes that are set locally. The default value is 'enable'." ::= { netIPRouting 35 } netIpRipDistributeDefaultGateway OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes and controls whether to distribute the default gateway that is set locally or received via RIP. The default value is 'enable'." ::= { netIPRouting 36 } -- Obsolete: Net PPP Configuration -- Obsolete OID: netPpp OBJECT IDENTIFIER ::= { net 15 } netSnmp OBJECT IDENTIFIER ::= { net 20 } -- SNMP manager table netSnmpManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF NetSnmpManagerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Allowed SNMP Manager table definition." ::= { netSnmp 5 } netSnmpManagerEntry OBJECT-TYPE SYNTAX NetSnmpManagerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows of the SNMP Manager Table." INDEX { netSnmpManagerNumber } ::= { netSnmpManagerTable 1 } NetSnmpManagerEntry ::= SEQUENCE { netSnmpManagerNumber INTEGER, netSnmpManagerAddress DisplayString, netSnmpManagerStatus INTEGER } netSnmpManagerNumber OBJECT-TYPE SYNTAX INTEGER ( 1..10 ) ACCESS not-accessible STATUS mandatory DESCRIPTION "Allowed SNMP Manager number. Used as index in Allowed SNMP Manager Table." ::= { netSnmpManagerEntry 1 } netSnmpManagerAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the address of the manager, which is allowed to send an SNMP GET or SET request to the equipment. The address 255.255.255.255 disables this Manager." ::= { netSnmpManagerEntry 2 } netSnmpManagerStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to indicate if the netSnmpManagerAddress having the same netSnmpManagerNumber is enabled or disabled. The possible values are: disable = the NMS mentioned above is not valid to access the SNMP agent of the TRuepoint radio; otherwise enable = the NMS mentioned above is able to access the SNMP agent of the TRuepoint radio." ::= { netSnmpManagerEntry 3 } netSnmpTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable (0), custom (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object describes & controls whether the Traps are CUSTOM or DISABLED. If CUSTOM, traps are sent to all the managers listed in the Trap Destination table (see netSnmpTrapDestinationTable). All trap messages can be disabled as a group using this object, or if this object is CUSTOM, each trap message can be configured individually using objects whose names begin as 'netSnmpTrapEnable...' (such as netSnmpTrapEnableConfigAlm)." ::= { netSnmp 10 } netSnmpTrapsConfig OBJECT IDENTIFIER ::= { netSnmp 15 } netSnmpNoAddressTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 2 } netSnmpCableModemTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 4 } netSnmpRebootTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 5 } netSnmpSpiCommTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 6 } netSnmpRfuCommTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 7 } netSnmpMmcFileSystemTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 8 } netSnmpConfigFileTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 9 } netSnmpAtpcTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 10 } netSnmpExtAlarmsTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 11 } netSnmpSignalDegradedModemTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 12 } netSnmpAlignmentModemTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 13 } netSnmpBerTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 14 } netSnmpRslRfuTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 15 } netSnmpInputLossTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 16 } netSnmpOutputFailTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 17 } netSnmpCodeErrorTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 18 } netSnmpInputAISTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 19 } netSnmpLockTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 20 } netSnmpInputLpbkTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 21 } netSnmpHighLevelLpbkTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 23 } netSnmpRfuMuteTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 24 } netSnmpCwToneTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 25 } netSnmpCardMismatchTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 26 } netSnmpCardAbsentTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 27 } netSnmpCardDownloadTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 28 } netSnmpCardFailTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 29 } netSnmpUnknownCardTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 30 } netSnmpFwNotUpgradedTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 32 } netSnmpCardSettingsTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 33 } netSnmpReplaceMeTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 34 } netSnmpRfuTxSilentFailureTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 49 } netSnmpEepromRfuTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 54 } netSnmpRfuCalibrationTblMismatchTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 56 } netSnmpLoadCorruptedTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 59 } netSnmpNotSupportedInSimplexModeTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 60 } netSnmpLocalRadioLpbkTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 61 } netSnmpRemoteRadioLpbkTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 62 } netSnmpRemoteRadioLpbkReqTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 63 } netSnmpSyncLossTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 64 } netSnmpInputOOFTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 65 } netSnmpInputDegradedTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 66 } netSnmpEthernetLinkTestTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 67 } netSnmpInsertAISTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 68 } netSnmpRfuTxEquipmentTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 69 } netSnmpRfuRxEquipmentTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 70 } netSnmpCeTunnelConflictTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 71 } netSnmpCeTunnelCommFailTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 72 } netSnmpRfuPALowTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 73 } netSnmpRfuPAOutOfRangeTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 74 } netSnmpRfuSynthesizerTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 75 } netSnmpTxClkInputLossTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 76 } netSnmpModemSynthesizerTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 77 } netSnmpWrongConfigurationTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 78 } netSnmpTxRdiInTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 79 } netSnmpTimingRefRadioTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 80 } netSnmpTimingRefInputTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 81 } netSnmpTimingRefSpurTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 82 } netSnmpTimingRefPdhTrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 83 } netSnmpTimingRefExtClockInput1TrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 84 } netSnmpTimingRefExtClockInput2TrapEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual traps configuration object." ::= { netSnmpTrapsConfig 85 } netSnmpTrapCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "This string object describes the Community name, which will be used in trap. Default value is 'TRuepoint'." ::= { netSnmp 30 } -- SNMP trap destination table netSnmpTrapDestinationTable OBJECT-TYPE SYNTAX SEQUENCE OF NetSnmpTrapDestinationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "SNMP Trap Destination table definition." ::= { netSnmp 35 } netSnmpTrapDestinationEntry OBJECT-TYPE SYNTAX NetSnmpTrapDestinationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of the entries in the rows of the SNMP Trap destination table." INDEX { netSnmpTrapDestinationNumber } ::= { netSnmpTrapDestinationTable 1 } NetSnmpTrapDestinationEntry ::= SEQUENCE { netSnmpTrapDestinationNumber INTEGER, netSnmpTrapDestinationAddress DisplayString, netSnmpTrapDestinationStatus INTEGER } netSnmpTrapDestinationNumber OBJECT-TYPE SYNTAX INTEGER ( 1..10 ) ACCESS not-accessible STATUS mandatory DESCRIPTION "Trap Destination number. Used as index in Allowed SNMP Trap Destination Table." ::= { netSnmpTrapDestinationEntry 1 } netSnmpTrapDestinationAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This string object describes and controls one of 10 Addresses in the netSnmpTrapDestinationTable to which to send SNMP traps." ::= { netSnmpTrapDestinationEntry 2 } netSnmpTrapDestinationStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to indicate if the netSnmpTrapDestinationAddress having the same netSnmpTrapDestinationNumber is enabled or disabled. The possible values are: disable = the trap will not be sent to the NMS mentioned above; otherwise enable = the traps will be sent to the NMS mentioned above." ::= { netSnmpTrapDestinationEntry 3 } -- -- The Inventory Group -- inventoryCardTable OBJECT-TYPE SYNTAX SEQUENCE OF InventoryCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the objects identifying the software and firmware versions present in the system. Each entry in the table describes the Card ID (CONTROLLER, MUX-A/B, MODEM-A/B, etc), Part Number (XXX-XXXXXX-XXX), Serial Number (XXXXXXXX), Manufacturing Date (YEAR-MM-DD)." ::= { inventory 1 } inventoryCardEntry OBJECT-TYPE SYNTAX InventoryCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of entries in the rows in the inventory table." INDEX { inventoryCardID } ::= { inventoryCardTable 1 } InventoryCardEntry ::= SEQUENCE { inventoryCardID INTEGER, inventoryCardName DisplayString, inventoryCardPN DisplayString, inventoryCardRevision INTEGER, inventoryCardSN DisplayString, inventoryCardManufactureDate DisplayString, inventoryCardSwRunning DisplayString, inventoryCardSwPB DisplayString, inventoryCardSwAB DisplayString, inventoryCardSettingRunning DisplayString, inventoryCardSettingPB DisplayString, inventoryCardSettingAB DisplayString, inventoryCardMMCCardID DisplayString, inventoryCardCLEICode DisplayString } inventoryCardID OBJECT-TYPE SYNTAX INTEGER { controller (1), mux-A (2), mux-B (3), modem-A (4), modem-B (5), opt-card-1 (6), opt-card-2 (7), sdm (8), rfu-A (9), rfu-B (10) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object provides an index to the rows in the inventory card table." ::= { inventoryCardEntry 1 } inventoryCardName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the card Name. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The name is zero terminated string." ::= { inventoryCardEntry 2 } inventoryCardPN OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Part Number of the cards. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Part Number is presented as zero terminated string in the following format: XXX-XXXXXX-XXX. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 3 } inventoryCardRevision OBJECT-TYPE SYNTAX INTEGER (0..99) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Revision of the cards Part Number. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Revision is presented as integer value from 0 to 99. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 4 } inventoryCardSN OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Serial Number of the cards. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Serial Number is presented as zero terminated string in the following format: XXXXXXXXXXXX. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 5 } inventoryCardManufactureDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Manufacturing Date of the cards. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Manufacturing Date is presented as zero terminated string in the following format: YEAR-MM-DD. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 6 } inventoryCardSwRunning OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Software/Firmware Version Number currently running in the cards. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Software/Firmware Version Number is presented as zero terminated string in the following format: XXX.XXX.XXX. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 7 } inventoryCardSwPB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Software/Firmware Version Number of the cards, which is located in Primary Bank. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Software/Firmware Version Number is presented as zero terminated string in the following format: XXX.XXX.XXX. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 8 } inventoryCardSwAB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Software/Firmware Version Number of the cards, which is located in Alternate Bank. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Software/Firmware Version Number is presented as zero terminated string in the following format: XXX.XXX.XXX. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 9 } inventoryCardSettingRunning OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Firmware Settings Version Number currently running in the cards. For some cards (like CONTROLLER or RFU) there are no setting file and this object is empty string. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Firmware Settings Version Number is presented as zero terminated string in the following format: XXX.XXX.XXX. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 10 } inventoryCardSettingPB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Firmware Settings Version Number of the cards, which is located in Primary Bank. For some cards (like CONTROLLER or RFU) there are no setting file and this object is empty string. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Firmware Settings Version Number is presented as zero terminated string in the following format: XXX.XXX.XXX. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 11 } inventoryCardSettingAB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Firmware Settings Version Number of the cards, which is located in Alternate Bank. For some cards (like CONTROLLER or RFU) there are no setting file and this object is empty string. It is a part of the inventory card table (inventoryCardTable) and is indexed by the object inventoryCardID. The Firmware Settings Version Number is presented as zero terminated string in the following format: XXX.XXX.XXX. Not available if inventoryCardID is SDM." ::= { inventoryCardEntry 12 } inventoryCardMMCCardID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the identification parameters of the MMC memory card installed in the system card. This object is presented as a zero terminated string. Currently, this is only available in the controller card, for all other cards, this object is an empty string." ::= { inventoryCardEntry 13 } inventoryCardCLEICode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the COMMON LANGUAGE Equipment Identification (CLEI) code of the card. This object is presented as a zero terminated string. Not available if inventoryCardID is SDM. COMMON LANGUAGE is a registered trademark and CLEI is a trademark of Telcordia Technologies, Inc." ::= { inventoryCardEntry 14 } -- RFU Module Table inventoryRfuModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF InventoryRfuModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the objects identifying the RFU Modules inevntory information. Each entry in the table describes the PN and SN for side RFU A and B." ::= { inventory 3 } inventoryRfuModuleEntry OBJECT-TYPE SYNTAX InventoryRfuModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object gives the sequence of entries in the rows in the Rfu Module inventory table." INDEX { inventoryRfuSide } ::= { inventoryRfuModuleTable 1 } InventoryRfuModuleEntry ::= SEQUENCE { inventoryRfuSide INTEGER, inventoryRfuTxModulePN DisplayString, inventoryRfuTxModuleSN DisplayString, inventoryRfuRxModulePN DisplayString, inventoryRfuRxModuleSN DisplayString, inventoryRfuIfRpcModulePN DisplayString, inventoryRfuIfRpcModuleSN DisplayString, inventoryRfuFamily INTEGER } inventoryRfuSide OBJECT-TYPE SYNTAX INTEGER { side-A (1), side-B (2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used as an index to address the inventoryRfuModuleEntry. Its value represents the radio side (A or B)." ::= { inventoryRfuModuleEntry 1 } inventoryRfuTxModulePN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Part Number of the RFU Tx Module. It is a part of the inventory RFU Modules table (inventoryRfuModuleTable) and is indexed by the object inventoryRfuSide. The Part Number is presented as a string in the following format: XXX-XXXXXX-XXX." ::= { inventoryRfuModuleEntry 2 } inventoryRfuTxModuleSN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Serial Number of the RFU Tx Module. It is a part of the inventory RFU Modules table (inventoryRfuModuleTable) and is indexed by the object inventoryRfuSide. The Serial Number is presented as a string in the following format: XXX-XXXXXX-XXX." ::= { inventoryRfuModuleEntry 3 } inventoryRfuRxModulePN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Part Number of the RFU Rx Module. It is a part of the inventory RFU Modules table (inventoryRfuModuleTable) and is indexed by the object inventoryRfuSide. The Part Number is presented as a string in the following format: XXX-XXXXXX-XXX." ::= { inventoryRfuModuleEntry 4 } inventoryRfuRxModuleSN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Serial Number of the RFU Rx Module. It is a part of the inventory RFU Modules table (inventoryRfuModuleTable) and is indexed by the object inventoryRfuSide. The Serial Number is presented as a string in the following format: XXX-XXXXXX-XXX." ::= { inventoryRfuModuleEntry 5 } inventoryRfuIfRpcModulePN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Part Number of the RFU IF/RPC Module. It is a part of the inventory RFU Modules table (inventoryRfuModuleTable) and is indexed by the object inventoryRfuSide. The Part Number is presented as a string in the following format: XXX-XXXXXX-XXX." ::= { inventoryRfuModuleEntry 6 } inventoryRfuIfRpcModuleSN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Serial Number of the RFU IF/RPC Module. It is a part of the inventory RFU Modules table (inventoryRfuModuleTable) and is indexed by the object inventoryRfuSide. The Serial Number is presented as a string in the following format: XXX-XXXXXX-XXX." ::= { inventoryRfuModuleEntry 7 } inventoryRfuFamily OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unknown (0), tr5100 (5100), tr5200 (5200), tr5300 (5300) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the RFU family. It is a part of the inventory RFU Modules table (inventoryRfuModuleTable) and is indexed by the object inventoryRfuSide. There are several types of TRuepoint RFU: TR5100, TR5200, and TR5300." ::= { inventoryRfuModuleEntry 8 } -- Hardware Key hwKey OBJECT IDENTIFIER ::= { inventory 5 } hardwareKeyMuxA OBJECT-TYPE SYNTAX INTEGER { not-installed (-1), option-001 (81), option-002 (82), option-003 (83), option-004 (84) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes Hardware Key installed for Mux A. When installed they unlock additional capacity on NxE1 and NxDS1 modules as shown below: Hw key option NxDS1 capacity NxE1 capacity =========================================== not-installed 4DS1 2E1 Option 001 No upgrade 4E1 Option 002 8DS1 8E1 Option 003 12DS1 No upgrade Option 004 16DS1 16E1" ::= { hwKey 1 } hardwareKeyMuxB OBJECT-TYPE SYNTAX INTEGER { not-installed (-1), option-001 (81), option-002 (82), option-003 (83), option-004 (84) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes Hardware Key installed for Mux B. When installed they unlock additional capacity on NxE1 and NxDS1 modules as shown below: Hw key option NxDS1 capacity NxE1 capacity =========================================== not-installed 4DS1 2E1 Option 001 No upgrade 4E1 Option 002 8DS1 8E1 Option 003 12DS1 No upgrade Option 004 16DS1 16E1" ::= { hwKey 2 } -- RFU Calibration calibrationSw OBJECT IDENTIFIER ::= { inventory 6 } calibrationRfuIfRpcSwVersion-A OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes RFU A IF/RPC module calibration software version." ::= { calibrationSw 1 } calibrationRfuIfRpcSwVersion-B OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes RFU B IF/RPC module calibration software version." ::= { calibrationSw 2 } calibrationRfuTxSwVersion-A OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes RFU A Tx module calibration software version." ::= { calibrationSw 3 } calibrationRfuTxSwVersion-B OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes RFU B Tx module calibration software version." ::= { calibrationSw 4 } calibrationRfuRxSwVersion-A OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes RFU A Rx module calibration software version." ::= { calibrationSw 5 } calibrationRfuRxSwVersion-B OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes RFU B Rx module calibration software version." ::= { calibrationSw 6 } calibrationRfuHpaSwVersion-A OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes RFU A HPA module calibration software version." ::= { calibrationSw 7 } calibrationRfuHpaSwVersion-B OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object describes RFU B HPA module calibration software version." ::= { calibrationSw 8 } -- MUX inventory muxInventory OBJECT IDENTIFIER ::= { inventory 7 } inventoryInterfaceTypeMix-A OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unknown (0), electrical (1), single-optical (2), multi-optical (3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes interface type for OC-3/STM-1 multiplexer A." ::= { muxInventory 1 } inventoryInterfaceTypeMix-B OBJECT-TYPE SYNTAX INTEGER { not-equipped (-1), unknown (0), electrical (1), single-optical (2), multi-optical (3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes interface type for OC-3/STM-1 multiplexer B." ::= { muxInventory 2 } -- Shelf inventory shelfInventory OBJECT IDENTIFIER ::= { inventory 8 } inventoryShelfType OBJECT-TYPE SYNTAX INTEGER { rms-1 (0), rms-2 (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes TRuepoint shelf type. It can have 1 or 2 RMS." ::= { shelfInventory 1 } inventorySpuBootVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "String, which contains version of SPU boot." ::= { inventory 9 } inventoryRfuBootVersion-A OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "String, which contains version of RFU A boot." ::= { inventory 10 } inventoryRfuBootVersion-B OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "String, which contains version of RFU B boot." ::= { inventory 11 } inventoryLoadVersionPB OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "String, which contains version of load in primary bank." ::= { inventory 20 } inventoryLoadVersionAB OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "String, which contains version of load in alternate bank." ::= { inventory 21 } -- -- Alarm group -- alarmMajor OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Major alarm status. The Major alarm is set when the traffic is affected." ::= { alarm 1 } alarmMinor OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Minor alarm status. The Minor alarm is set when there is any alarm." ::= { alarm 2 } alarmRemoteSite OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This object describes the Remote site alarm status. This alarm is set when there is any alarm on remote site." ::= { alarm 3 } -- Summary alarms alarmSummary OBJECT IDENTIFIER ::= { alarm 10 } alarmInputLoss OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that at least one of the three alarms (OC3/STM1 Input Loss, Tributary Input Loss, Wayside Input Loss) are present in equipment." ::= { alarmSummary 1 } alarmCable OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that at least one of the two alarms (Cable A, Cable B) are present in equipment." ::= { alarmSummary 2 } alarmRfu OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that at least one of the two alarms (RFU A Replace Me, RFU B Replace Me) are present in equipment." ::= { alarmSummary 3 } alarmSpu OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that at least one of the several SPU alarms are present in equipment." ::= { alarmSummary 4 } allAlarmsCompressed1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(126)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains compressed alarm data. Each bit of the object corresponds to one alarm and indicates either ALARM (1) or NO ALARM (0). Alarms are mapped into bits 0 through 999 where bit 0 is the left-most (most significant) bit in the stream in accordance with SNMPv2 BITS format. { alarmMajor(0), alarmMinor(1), alarmRemoteSite(2), alarmInputLoss(3), alarmCable(4), alarmRfu(5), alarmSpu(6), alarmNoEthernetMacAddress(7), alarmDhcpClientFail(8), alarmCableModem-A(9), alarmCableModem-B(10), alarmReboot(11), alarmMmcFileSystem(12), alarmAtpcHighPower(13), alarmTpcTimeLimit(14), alarmConfigFile(15), alarmLoadCorrupted(16), alarmAtpcHighPowerTx-A(17), alarmTpcTimeLimit-A(18), alarmAtpcHighPowerTx-B(19), alarmTpcTimeLimit-B(20), alarmSpiCommModem-A(21), alarmSpiCommModem-B(22), alarmSpiCommMux-A(23), alarmSpiCommMux-B(24), alarmSpiCommOpt-1(25), alarmSpiCommOpt-2(26), alarmRfuComm-A(27), alarmRfuComm-B(28), alarmRfLinkServiceChannelCommFail(29), alarmMismatchMux(30), alarmMismatchSdm(31), alarmMismatchModem(32), alarmMismatchRfu(33), alarmBER(34), alarmBER-A(35), alarmBER-B(36), alarmSignalDegradedModem-A(37), alarmSignalDegradedModem-B(38), alarmRslLowRfu-A(39), alarmRslLowRfu-B(40), alarmAlignment(41), alarmRemoteAnySyncLoss(42), alarmPathDemuxSyncLoss-A(43), alarmPathDemuxSyncLoss-B(44), deprecated: alarmPathDemuxWaysideSyncLoss-A(45), deprecated: alarmPathDemuxWaysideSyncLoss-B(46), alarmLockTx-A(47), alarmLockTx-B(48), alarmLockRxRfuDecoder-A(49), alarmLockRxRfuDecoder-B(50), alarmLockRxDadeDemux-A(51), alarmLockRxDadeDemux-B(52), alarmModemIFLoopback(53), alarmMuxHighLevelLoopback(54), alarmTributaryLocalInputLoopback1(55), alarmTributaryLocalInputLoopback2(56), alarmTributaryLocalInputLoopback3(57), alarmTributaryLocalInputLoopback4(58), alarmTributaryLocalInputLoopback5(59), alarmTributaryLocalInputLoopback6(60), alarmTributaryLocalInputLoopback7(61), alarmTributaryLocalInputLoopback8(62), alarmTributaryLocalInputLoopback9(63), alarmTributaryLocalInputLoopback10(64), alarmTributaryLocalInputLoopback11(65), alarmTributaryLocalInputLoopback12(66), alarmTributaryLocalInputLoopback13(67), alarmTributaryLocalInputLoopback14(68), alarmTributaryLocalInputLoopback15(69), alarmTributaryLocalInputLoopback16(70), alarmTributaryLocalInputLoopback17(71), alarmTributaryLocalInputLoopback18(72), alarmTributaryLocalInputLoopback19(73), alarmTributaryLocalInputLoopback20(74), alarmTributaryLocalInputLoopback21(75), alarmTributaryLocalInputLoopback22(76), alarmTributaryLocalInputLoopback23(77), alarmTributaryLocalInputLoopback24(78), alarmTributaryLocalInputLoopback25(79), alarmTributaryLocalInputLoopback26(80), alarmTributaryLocalInputLoopback27(81), alarmTributaryLocalInputLoopback28(82), alarmTributaryLocalRadioLoopback1(83), alarmTributaryLocalRadioLoopback2(84), alarmTributaryLocalRadioLoopback3(85), alarmTributaryLocalRadioLoopback4(86), alarmTributaryLocalRadioLoopback5(87), alarmTributaryLocalRadioLoopback6(88), alarmTributaryLocalRadioLoopback7(89), alarmTributaryLocalRadioLoopback8(90), alarmTributaryLocalRadioLoopback9(91), alarmTributaryLocalRadioLoopback10(92), alarmTributaryLocalRadioLoopback11(93), alarmTributaryLocalRadioLoopback12(94), alarmTributaryLocalRadioLoopback13(95), alarmTributaryLocalRadioLoopback14(96), alarmTributaryLocalRadioLoopback15(97), alarmTributaryLocalRadioLoopback16(98), alarmTributaryLocalRadioLoopback17(99), alarmTributaryLocalRadioLoopback18(100), alarmTributaryLocalRadioLoopback19(101), alarmTributaryLocalRadioLoopback20(102), alarmTributaryLocalRadioLoopback21(103), alarmTributaryLocalRadioLoopback22(104), alarmTributaryLocalRadioLoopback23(105), alarmTributaryLocalRadioLoopback24(106), alarmTributaryLocalRadioLoopback25(107), alarmTributaryLocalRadioLoopback26(108), alarmTributaryLocalRadioLoopback27(109), alarmTributaryLocalRadioLoopback28(110), alarmTributaryRemoteRadioLoopback1(111), alarmTributaryRemoteRadioLoopback2(112), alarmTributaryRemoteRadioLoopback3(113), alarmTributaryRemoteRadioLoopback4(114), alarmTributaryRemoteRadioLoopback5(115), alarmTributaryRemoteRadioLoopback6(116), alarmTributaryRemoteRadioLoopback7(117), alarmTributaryRemoteRadioLoopback8(118), alarmTributaryRemoteRadioLoopback9(119), alarmTributaryRemoteRadioLoopback10(120), alarmTributaryRemoteRadioLoopback11(121), alarmTributaryRemoteRadioLoopback12(122), alarmTributaryRemoteRadioLoopback13(123), alarmTributaryRemoteRadioLoopback14(124), alarmTributaryRemoteRadioLoopback15(125), alarmTributaryRemoteRadioLoopback16(126), alarmTributaryRemoteRadioLoopback17(127), alarmTributaryRemoteRadioLoopback18(128), alarmTributaryRemoteRadioLoopback19(129), alarmTributaryRemoteRadioLoopback20(130), alarmTributaryRemoteRadioLoopback21(131), alarmTributaryRemoteRadioLoopback22(132), alarmTributaryRemoteRadioLoopback23(133), alarmTributaryRemoteRadioLoopback24(134), alarmTributaryRemoteRadioLoopback25(135), alarmTributaryRemoteRadioLoopback26(136), alarmTributaryRemoteRadioLoopback27(137), alarmTributaryRemoteRadioLoopback28(138), alarmTributaryRemoteRadioLoopbackRequest1(139), alarmTributaryRemoteRadioLoopbackRequest2(140), alarmTributaryRemoteRadioLoopbackRequest3(141), alarmTributaryRemoteRadioLoopbackRequest4(142), alarmTributaryRemoteRadioLoopbackRequest5(143), alarmTributaryRemoteRadioLoopbackRequest6(144), alarmTributaryRemoteRadioLoopbackRequest7(145), alarmTributaryRemoteRadioLoopbackRequest8(146), alarmTributaryRemoteRadioLoopbackRequest9(147), alarmTributaryRemoteRadioLoopbackRequest10(148), alarmTributaryRemoteRadioLoopbackRequest11(149), alarmTributaryRemoteRadioLoopbackRequest12(150), alarmTributaryRemoteRadioLoopbackRequest13(151), alarmTributaryRemoteRadioLoopbackRequest14(152), alarmTributaryRemoteRadioLoopbackRequest15(153), alarmTributaryRemoteRadioLoopbackRequest16(154), alarmTributaryRemoteRadioLoopbackRequest17(155), alarmTributaryRemoteRadioLoopbackRequest18(156), alarmTributaryRemoteRadioLoopbackRequest19(157), alarmTributaryRemoteRadioLoopbackRequest20(158), alarmTributaryRemoteRadioLoopbackRequest21(159), alarmTributaryRemoteRadioLoopbackRequest22(160), alarmTributaryRemoteRadioLoopbackRequest23(161), alarmTributaryRemoteRadioLoopbackRequest24(162), alarmTributaryRemoteRadioLoopbackRequest25(163), alarmTributaryRemoteRadioLoopbackRequest26(164), alarmTributaryRemoteRadioLoopbackRequest27(165), alarmTributaryRemoteRadioLoopbackRequest28(166), alarmOC3STM1LocalInputLoopback(167), alarmOC3STM1LocalRadioLoopback(168), alarmOC3STM1RemoteRadioLoopback(169), alarmOC3STM1RemoteRadioLoopbackRequest(170), alarmE3DS3LocalInputLoopback1(171), alarmDS3LocalInputLoopback2(172), alarmDS3LocalInputLoopback3(173), alarmE3DS3LocalRadioLoopback1(174), alarmDS3LocalRadioLoopback2(175), alarmDS3LocalRadioLoopback3(176), alarmE3DS3RemoteRadioLoopback1(177), alarmDS3RemoteRadioLoopback2(178), alarmDS3RemoteRadioLoopback3(179), alarmE3DS3RemoteRadioLoopbackRequest1(180), alarmDS3RemoteRadioLoopbackRequest2(181), alarmDS3RemoteRadioLoopbackRequest3(182), alarmWaysideLocalInputLoopback1(183), alarmWaysideLocalInputLoopback2(184), alarmWaysideLocalInputLoopback3(185), alarmWaysideLocalRadioLoopback1(186), alarmWaysideLocalRadioLoopback2(187), alarmWaysideLocalRadioLoopback3(188), alarmWaysideRemoteRadioLoopback1(189), alarmWaysideRemoteRadioLoopback2(190), alarmWaysideRemoteRadioLoopback3(191), alarmWaysideRemoteRadioLoopbackRequest1(192), alarmWaysideRemoteRadioLoopbackRequest2(193), alarmWaysideRemoteRadioLoopbackRequest3(194), alarmModemIFLoopback-A(195), alarmMuxHighLevelLoopback-A(196), alarmTributaryLocalInputLoopback1-A(197), alarmTributaryLocalInputLoopback2-A(198), alarmTributaryLocalInputLoopback3-A(199), alarmTributaryLocalInputLoopback4-A(200), alarmTributaryLocalInputLoopback5-A(201), alarmTributaryLocalInputLoopback6-A(202), alarmTributaryLocalInputLoopback7-A(203), alarmTributaryLocalInputLoopback8-A(204), alarmTributaryLocalInputLoopback9-A(205), alarmTributaryLocalInputLoopback10-A(206), alarmTributaryLocalInputLoopback11-A(207), alarmTributaryLocalInputLoopback12-A(208), alarmTributaryLocalInputLoopback13-A(209), alarmTributaryLocalInputLoopback14-A(210), alarmTributaryLocalInputLoopback15-A(211), alarmTributaryLocalInputLoopback16-A(212), alarmTributaryLocalInputLoopback17-A(213), alarmTributaryLocalInputLoopback18-A(214), alarmTributaryLocalInputLoopback19-A(215), alarmTributaryLocalInputLoopback20-A(216), alarmTributaryLocalInputLoopback21-A(217), alarmTributaryLocalInputLoopback22-A(218), alarmTributaryLocalInputLoopback23-A(219), alarmTributaryLocalInputLoopback24-A(220), alarmTributaryLocalInputLoopback25-A(221), alarmTributaryLocalInputLoopback26-A(222), alarmTributaryLocalInputLoopback27-A(223), alarmTributaryLocalInputLoopback28-A(224), alarmTributaryLocalRadioLoopback1-A(225), alarmTributaryLocalRadioLoopback2-A(226), alarmTributaryLocalRadioLoopback3-A(227), alarmTributaryLocalRadioLoopback4-A(228), alarmTributaryLocalRadioLoopback5-A(229), alarmTributaryLocalRadioLoopback6-A(230), alarmTributaryLocalRadioLoopback7-A(231), alarmTributaryLocalRadioLoopback8-A(232), alarmTributaryLocalRadioLoopback9-A(233), alarmTributaryLocalRadioLoopback10-A(234), alarmTributaryLocalRadioLoopback11-A(235), alarmTributaryLocalRadioLoopback12-A(236), alarmTributaryLocalRadioLoopback13-A(237), alarmTributaryLocalRadioLoopback14-A(238), alarmTributaryLocalRadioLoopback15-A(239), alarmTributaryLocalRadioLoopback16-A(240), alarmTributaryLocalRadioLoopback17-A(241), alarmTributaryLocalRadioLoopback18-A(242), alarmTributaryLocalRadioLoopback19-A(243), alarmTributaryLocalRadioLoopback20-A(244), alarmTributaryLocalRadioLoopback21-A(245), alarmTributaryLocalRadioLoopback22-A(246), alarmTributaryLocalRadioLoopback23-A(247), alarmTributaryLocalRadioLoopback24-A(248), alarmTributaryLocalRadioLoopback25-A(249), alarmTributaryLocalRadioLoopback26-A(250), alarmTributaryLocalRadioLoopback27-A(251), alarmTributaryLocalRadioLoopback28-A(252), alarmTributaryRemoteRadioLoopback1-A(253), alarmTributaryRemoteRadioLoopback2-A(254), alarmTributaryRemoteRadioLoopback3-A(255), alarmTributaryRemoteRadioLoopback4-A(256), alarmTributaryRemoteRadioLoopback5-A(257), alarmTributaryRemoteRadioLoopback6-A(258), alarmTributaryRemoteRadioLoopback7-A(259), alarmTributaryRemoteRadioLoopback8-A(260), alarmTributaryRemoteRadioLoopback9-A(261), alarmTributaryRemoteRadioLoopback10-A(262), alarmTributaryRemoteRadioLoopback11-A(263), alarmTributaryRemoteRadioLoopback12-A(264), alarmTributaryRemoteRadioLoopback13-A(265), alarmTributaryRemoteRadioLoopback14-A(266), alarmTributaryRemoteRadioLoopback15-A(267), alarmTributaryRemoteRadioLoopback16-A(268), alarmTributaryRemoteRadioLoopback17-A(269), alarmTributaryRemoteRadioLoopback18-A(270), alarmTributaryRemoteRadioLoopback19-A(271), alarmTributaryRemoteRadioLoopback20-A(272), alarmTributaryRemoteRadioLoopback21-A(273), alarmTributaryRemoteRadioLoopback22-A(274), alarmTributaryRemoteRadioLoopback23-A(275), alarmTributaryRemoteRadioLoopback24-A(276), alarmTributaryRemoteRadioLoopback25-A(277), alarmTributaryRemoteRadioLoopback26-A(278), alarmTributaryRemoteRadioLoopback27-A(279), alarmTributaryRemoteRadioLoopback28-A(280), alarmTributaryRemoteRadioLoopbackRequest1-A(281), alarmTributaryRemoteRadioLoopbackRequest2-A(282), alarmTributaryRemoteRadioLoopbackRequest3-A(283), alarmTributaryRemoteRadioLoopbackRequest4-A(284), alarmTributaryRemoteRadioLoopbackRequest5-A(285), alarmTributaryRemoteRadioLoopbackRequest6-A(286), alarmTributaryRemoteRadioLoopbackRequest7-A(287), alarmTributaryRemoteRadioLoopbackRequest8-A(288), alarmTributaryRemoteRadioLoopbackRequest9-A(289), alarmTributaryRemoteRadioLoopbackRequest10-A(290), alarmTributaryRemoteRadioLoopbackRequest11-A(291), alarmTributaryRemoteRadioLoopbackRequest12-A(292), alarmTributaryRemoteRadioLoopbackRequest13-A(293), alarmTributaryRemoteRadioLoopbackRequest14-A(294), alarmTributaryRemoteRadioLoopbackRequest15-A(295), alarmTributaryRemoteRadioLoopbackRequest16-A(296), alarmTributaryRemoteRadioLoopbackRequest17-A(297), alarmTributaryRemoteRadioLoopbackRequest18-A(298), alarmTributaryRemoteRadioLoopbackRequest19-A(299), alarmTributaryRemoteRadioLoopbackRequest20-A(300), alarmTributaryRemoteRadioLoopbackRequest21-A(301), alarmTributaryRemoteRadioLoopbackRequest22-A(302), alarmTributaryRemoteRadioLoopbackRequest23-A(303), alarmTributaryRemoteRadioLoopbackRequest24-A(304), alarmTributaryRemoteRadioLoopbackRequest25-A(305), alarmTributaryRemoteRadioLoopbackRequest26-A(306), alarmTributaryRemoteRadioLoopbackRequest27-A(307), alarmTributaryRemoteRadioLoopbackRequest28-A(308), alarmOC3STM1LocalInputLoopback-A(309), alarmOC3STM1LocalRadioLoopback-A(310), alarmOC3STM1RemoteRadioLoopback-A(311), alarmOC3STM1RemoteRadioLoopbackRequest-A(312), alarmE3DS3LocalInputLoopback1-A(313), alarmDS3LocalInputLoopback2-A(314), alarmDS3LocalInputLoopback3-A(315), alarmE3DS3LocalRadioLoopback1-A(316), alarmDS3LocalRadioLoopback2-A(317), alarmDS3LocalRadioLoopback3-A(318), alarmE3DS3RemoteRadioLoopback1-A(319), alarmDS3RemoteRadioLoopback2-A(320), alarmDS3RemoteRadioLoopback3-A(321), alarmE3DS3RemoteRadioLoopbackRequest1-A(322), alarmDS3RemoteRadioLoopbackRequest2-A(323), alarmDS3RemoteRadioLoopbackRequest3-A(324), alarmWaysideLocalInputLoopback1-A(325), alarmWaysideLocalInputLoopback2-A(326), alarmWaysideLocalInputLoopback3-A(327), alarmWaysideLocalRadioLoopback1-A(328), alarmWaysideLocalRadioLoopback2-A(329), alarmWaysideLocalRadioLoopback3-A(330), alarmWaysideRemoteRadioLoopback1-A(331), alarmWaysideRemoteRadioLoopback2-A(332), alarmWaysideRemoteRadioLoopback3-A(333), alarmWaysideRemoteRadioLoopbackRequest1-A(334), alarmWaysideRemoteRadioLoopbackRequest2-A(335), alarmWaysideRemoteRadioLoopbackRequest3-A(336), alarmModemIFLoopback-B(337), alarmMuxHighLevelLoopback-B(338), alarmTributaryLocalInputLoopback1-B(339), alarmTributaryLocalInputLoopback2-B(340), alarmTributaryLocalInputLoopback3-B(341), alarmTributaryLocalInputLoopback4-B(342), alarmTributaryLocalInputLoopback5-B(343), alarmTributaryLocalInputLoopback6-B(344), alarmTributaryLocalInputLoopback7-B(345), alarmTributaryLocalInputLoopback8-B(346), alarmTributaryLocalInputLoopback9-B(347), alarmTributaryLocalInputLoopback10-B(348), alarmTributaryLocalInputLoopback11-B(349), alarmTributaryLocalInputLoopback12-B(350), alarmTributaryLocalInputLoopback13-B(351), alarmTributaryLocalInputLoopback14-B(352), alarmTributaryLocalInputLoopback15-B(353), alarmTributaryLocalInputLoopback16-B(354), alarmTributaryLocalInputLoopback17-B(355), alarmTributaryLocalInputLoopback18-B(356), alarmTributaryLocalInputLoopback19-B(357), alarmTributaryLocalInputLoopback20-B(358), alarmTributaryLocalInputLoopback21-B(359), alarmTributaryLocalInputLoopback22-B(360), alarmTributaryLocalInputLoopback23-B(361), alarmTributaryLocalInputLoopback24-B(362), alarmTributaryLocalInputLoopback25-B(363), alarmTributaryLocalInputLoopback26-B(364), alarmTributaryLocalInputLoopback27-B(365), alarmTributaryLocalInputLoopback28-B(366), alarmTributaryLocalRadioLoopback1-B(367), alarmTributaryLocalRadioLoopback2-B(368), alarmTributaryLocalRadioLoopback3-B(369), alarmTributaryLocalRadioLoopback4-B(370), alarmTributaryLocalRadioLoopback5-B(371), alarmTributaryLocalRadioLoopback6-B(372), alarmTributaryLocalRadioLoopback7-B(373), alarmTributaryLocalRadioLoopback8-B(374), alarmTributaryLocalRadioLoopback9-B(375), alarmTributaryLocalRadioLoopback10-B(376), alarmTributaryLocalRadioLoopback11-B(377), alarmTributaryLocalRadioLoopback12-B(378), alarmTributaryLocalRadioLoopback13-B(379), alarmTributaryLocalRadioLoopback14-B(380), alarmTributaryLocalRadioLoopback15-B(381), alarmTributaryLocalRadioLoopback16-B(382), alarmTributaryLocalRadioLoopback17-B(383), alarmTributaryLocalRadioLoopback18-B(384), alarmTributaryLocalRadioLoopback19-B(385), alarmTributaryLocalRadioLoopback20-B(386), alarmTributaryLocalRadioLoopback21-B(387), alarmTributaryLocalRadioLoopback22-B(388), alarmTributaryLocalRadioLoopback23-B(389), alarmTributaryLocalRadioLoopback24-B(390), alarmTributaryLocalRadioLoopback25-B(391), alarmTributaryLocalRadioLoopback26-B(392), alarmTributaryLocalRadioLoopback27-B(393), alarmTributaryLocalRadioLoopback28-B(394), alarmTributaryRemoteRadioLoopback1-B(395), alarmTributaryRemoteRadioLoopback2-B(396), alarmTributaryRemoteRadioLoopback3-B(397), alarmTributaryRemoteRadioLoopback4-B(398), alarmTributaryRemoteRadioLoopback5-B(399), alarmTributaryRemoteRadioLoopback6-B(400), alarmTributaryRemoteRadioLoopback7-B(401), alarmTributaryRemoteRadioLoopback8-B(402), alarmTributaryRemoteRadioLoopback9-B(403), alarmTributaryRemoteRadioLoopback10-B(404), alarmTributaryRemoteRadioLoopback11-B(405), alarmTributaryRemoteRadioLoopback12-B(406), alarmTributaryRemoteRadioLoopback13-B(407), alarmTributaryRemoteRadioLoopback14-B(408), alarmTributaryRemoteRadioLoopback15-B(409), alarmTributaryRemoteRadioLoopback16-B(410), alarmTributaryRemoteRadioLoopback17-B(411), alarmTributaryRemoteRadioLoopback18-B(412), alarmTributaryRemoteRadioLoopback19-B(413), alarmTributaryRemoteRadioLoopback20-B(414), alarmTributaryRemoteRadioLoopback21-B(415), alarmTributaryRemoteRadioLoopback22-B(416), alarmTributaryRemoteRadioLoopback23-B(417), alarmTributaryRemoteRadioLoopback24-B(418), alarmTributaryRemoteRadioLoopback25-B(419), alarmTributaryRemoteRadioLoopback26-B(420), alarmTributaryRemoteRadioLoopback27-B(421), alarmTributaryRemoteRadioLoopback28-B(422), alarmTributaryRemoteRadioLoopbackRequest1-B(423), alarmTributaryRemoteRadioLoopbackRequest2-B(424), alarmTributaryRemoteRadioLoopbackRequest3-B(425), alarmTributaryRemoteRadioLoopbackRequest4-B(426), alarmTributaryRemoteRadioLoopbackRequest5-B(427), alarmTributaryRemoteRadioLoopbackRequest6-B(428), alarmTributaryRemoteRadioLoopbackRequest7-B(429), alarmTributaryRemoteRadioLoopbackRequest8-B(430), alarmTributaryRemoteRadioLoopbackRequest9-B(431), alarmTributaryRemoteRadioLoopbackRequest10-B(432), alarmTributaryRemoteRadioLoopbackRequest11-B(433), alarmTributaryRemoteRadioLoopbackRequest12-B(434), alarmTributaryRemoteRadioLoopbackRequest13-B(435), alarmTributaryRemoteRadioLoopbackRequest14-B(436), alarmTributaryRemoteRadioLoopbackRequest15-B(437), alarmTributaryRemoteRadioLoopbackRequest16-B(438), alarmTributaryRemoteRadioLoopbackRequest17-B(439), alarmTributaryRemoteRadioLoopbackRequest18-B(440), alarmTributaryRemoteRadioLoopbackRequest19-B(441), alarmTributaryRemoteRadioLoopbackRequest20-B(442), alarmTributaryRemoteRadioLoopbackRequest21-B(443), alarmTributaryRemoteRadioLoopbackRequest22-B(444), alarmTributaryRemoteRadioLoopbackRequest23-B(445), alarmTributaryRemoteRadioLoopbackRequest24-B(446), alarmTributaryRemoteRadioLoopbackRequest25-B(447), alarmTributaryRemoteRadioLoopbackRequest26-B(448), alarmTributaryRemoteRadioLoopbackRequest27-B(449), alarmTributaryRemoteRadioLoopbackRequest28-B(450), alarmOC3STM1LocalInputLoopback-B(451), alarmOC3STM1LocalRadioLoopback-B(452), alarmOC3STM1RemoteRadioLoopback-B(453), alarmOC3STM1RemoteRadioLoopbackRequest-B(454), alarmE3DS3LocalInputLoopback1-B(455), alarmDS3LocalInputLoopback2-B(456), alarmDS3LocalInputLoopback3-B(457), alarmE3DS3LocalRadioLoopback1-B(458), alarmDS3LocalRadioLoopback2-B(459), alarmDS3LocalRadioLoopback3-B(460), alarmE3DS3RemoteRadioLoopback1-B(461), alarmDS3RemoteRadioLoopback2-B(462), alarmDS3RemoteRadioLoopback3-B(463), alarmE3DS3RemoteRadioLoopbackRequest1-B(464), alarmDS3RemoteRadioLoopbackRequest2-B(465), alarmDS3RemoteRadioLoopbackRequest3-B(466), alarmWaysideLocalInputLoopback1-B(467), alarmWaysideLocalInputLoopback2-B(468), alarmWaysideLocalInputLoopback3-B(469), alarmWaysideLocalRadioLoopback1-B(470), alarmWaysideLocalRadioLoopback2-B(471), alarmWaysideLocalRadioLoopback3-B(472), alarmWaysideRemoteRadioLoopback1-B(473), alarmWaysideRemoteRadioLoopback2-B(474), alarmWaysideRemoteRadioLoopback3-B(475), alarmWaysideRemoteRadioLoopbackRequest1-B(476), alarmWaysideRemoteRadioLoopbackRequest2-B(477), alarmWaysideRemoteRadioLoopbackRequest3-B(478), alarmRfuMuted-A(479), alarmRfuMuted-B(480), alarmTxCwTone-A(481), alarmTxCwTone-B(482), alarmControllerExternalInput-1(483), alarmControllerExternalInput-2(484), alarmOptCard1ExternalInput-0(485), alarmOptCard1ExternalInput-1(486), alarmOptCard1ExternalInput-2(487), alarmOptCard1ExternalInput-3(488), alarmOptCard1ExternalInput-4(489), alarmOptCard1ExternalInput-5(490), alarmOptCard1ExternalInput-6(491), alarmOptCard1ExternalInput-7(492), alarmOptCard1ExternalInput-8(493), alarmOptCard1ExternalInput-9(494), alarmOptCard1ExternalInput-10(495), alarmOptCard1ExternalInput-11(496), alarmOptCard1ExternalInput-12(497), alarmOptCard1ExternalInput-13(498), alarmOptCard1ExternalInput-14(499), alarmOptCard1ExternalInput-15(500), alarmOptCard1ExternalInput-16(501), alarmOptCard1ExternalInput-17(502), alarmOptCard1ExternalInput-18(503), alarmOptCard1ExternalInput-19(504), alarmOptCard1ExternalInput-20(505), alarmOptCard1ExternalInput-21(506), alarmOptCard1ExternalInput-22(507), alarmOptCard1ExternalInput-23(508), alarmOptCard1ExternalInput-24(509), alarmOptCard1ExternalInput-25(510), alarmOptCard1ExternalInput-26(511), alarmOptCard1ExternalInput-27(512), alarmOptCard1ExternalInput-28(513), alarmOptCard1ExternalInput-29(514), alarmOptCard2ExternalInput-0(515), alarmOptCard2ExternalInput-1(516), alarmOptCard2ExternalInput-2(517), alarmOptCard2ExternalInput-3(518), alarmOptCard2ExternalInput-4(519), alarmOptCard2ExternalInput-5(520), alarmOptCard2ExternalInput-6(521), alarmOptCard2ExternalInput-7(522), alarmOptCard2ExternalInput-8(523), alarmOptCard2ExternalInput-9(524), alarmOptCard2ExternalInput-10(525), alarmOptCard2ExternalInput-11(526), alarmOptCard2ExternalInput-12(527), alarmOptCard2ExternalInput-13(528), alarmOptCard2ExternalInput-14(529), alarmOptCard2ExternalInput-15(530), alarmOptCard2ExternalInput-16(531), alarmOptCard2ExternalInput-17(532), alarmOptCard2ExternalInput-18(533), alarmOptCard2ExternalInput-19(534), alarmOptCard2ExternalInput-20(535), alarmOptCard2ExternalInput-21(536), alarmOptCard2ExternalInput-22(537), alarmOptCard2ExternalInput-23(538), alarmOptCard2ExternalInput-24(539), alarmOptCard2ExternalInput-25(540), alarmOptCard2ExternalInput-26(541), alarmOptCard2ExternalInput-27(542), alarmOptCard2ExternalInput-28(543), alarmOptCard2ExternalInput-29(544), alarmAbsentMux-A(545), alarmAbsentMux-B(546), alarmAbsentModem-A(547), alarmAbsentModem-B(548), alarmAbsentOptionalCard1(549), alarmAbsentOptionalCard2(550), alarmAbsentRfu-A(551), alarmAbsentRfu-B(552), alarmAbsentSDM(553), alarmFpgaDownloadModem-A(554), alarmFpgaSettingsModem-A(555), alarmUnknownCardModem-A(556), alarmFwNotUpgradedModem-A(557), alarmReplaceMeModem-A(558), alarmFpgaDownloadModem-B(559), alarmFpgaSettingsModem-B(560), alarmUnknownCardModem-B(561), alarmFwNotUpgradedModem-B(562), alarmReplaceMeModem-B(563), alarmTxClockInputLossMux-A(564), alarmTributary1TxInputAISMux-A(565), alarmTributary2TxInputAISMux-A(566), alarmTributary3TxInputAISMux-A(567), alarmTributary4TxInputAISMux-A(568), alarmTributary5TxInputAISMux-A(569), alarmTributary6TxInputAISMux-A(570), alarmTributary7TxInputAISMux-A(571), alarmTributary8TxInputAISMux-A(572), alarmTributary9TxInputAISMux-A(573), alarmTributary10TxInputAISMux-A(574), alarmTributary11TxInputAISMux-A(575), alarmTributary12TxInputAISMux-A(576), alarmTributary13TxInputAISMux-A(577), alarmTributary14TxInputAISMux-A(578), alarmTributary15TxInputAISMux-A(579), alarmTributary16TxInputAISMux-A(580), alarmTributary17TxInputAISMux-A(581), alarmTributary18TxInputAISMux-A(582), alarmTributary19TxInputAISMux-A(583), alarmTributary20TxInputAISMux-A(584), alarmTributary21TxInputAISMux-A(585), alarmTributary22TxInputAISMux-A(586), alarmTributary23TxInputAISMux-A(587), alarmTributary24TxInputAISMux-A(588), alarmTributary25TxInputAISMux-A(589), alarmTributary26TxInputAISMux-A(590), alarmTributary27TxInputAISMux-A(591), alarmTributary28TxInputAISMux-A(592), alarmTributary1TxInputLOSMux-A(593), alarmTributary2TxInputLOSMux-A(594), alarmTributary3TxInputLOSMux-A(595), alarmTributary4TxInputLOSMux-A(596), alarmTributary5TxInputLOSMux-A(597), alarmTributary6TxInputLOSMux-A(598), alarmTributary7TxInputLOSMux-A(599), alarmTributary8TxInputLOSMux-A(600), alarmTributary9TxInputLOSMux-A(601), alarmTributary10TxInputLOSMux-A(602), alarmTributary11TxInputLOSMux-A(603), alarmTributary12TxInputLOSMux-A(604), alarmTributary13TxInputLOSMux-A(605), alarmTributary14TxInputLOSMux-A(606), alarmTributary15TxInputLOSMux-A(607), alarmTributary16TxInputLOSMux-A(608), alarmTributary17TxInputLOSMux-A(609), alarmTributary18TxInputLOSMux-A(610), alarmTributary19TxInputLOSMux-A(611), alarmTributary20TxInputLOSMux-A(612), alarmTributary21TxInputLOSMux-A(613), alarmTributary22TxInputLOSMux-A(614), alarmTributary23TxInputLOSMux-A(615), alarmTributary24TxInputLOSMux-A(616), alarmTributary25TxInputLOSMux-A(617), alarmTributary26TxInputLOSMux-A(618), alarmTributary27TxInputLOSMux-A(619), alarmTributary28TxInputLOSMux-A(620), alarmTributary1TxInputCodeErrorMux-A(621), alarmTributary2TxInputCodeErrorMux-A(622), alarmTributary3TxInputCodeErrorMux-A(623), alarmTributary4TxInputCodeErrorMux-A(624), alarmTributary5TxInputCodeErrorMux-A(625), alarmTributary6TxInputCodeErrorMux-A(626), alarmTributary7TxInputCodeErrorMux-A(627), alarmTributary8TxInputCodeErrorMux-A(628), alarmTributary9TxInputCodeErrorMux-A(629), alarmTributary10TxInputCodeErrorMux-A(630), alarmTributary11TxInputCodeErrorMux-A(631), alarmTributary12TxInputCodeErrorMux-A(632), alarmTributary13TxInputCodeErrorMux-A(633), alarmTributary14TxInputCodeErrorMux-A(634), alarmTributary15TxInputCodeErrorMux-A(635), alarmTributary16TxInputCodeErrorMux-A(636), alarmTributary17TxInputCodeErrorMux-A(637), alarmTributary18TxInputCodeErrorMux-A(638), alarmTributary19TxInputCodeErrorMux-A(639), alarmTributary20TxInputCodeErrorMux-A(640), alarmTributary21TxInputCodeErrorMux-A(641), alarmTributary22TxInputCodeErrorMux-A(642), alarmTributary23TxInputCodeErrorMux-A(643), alarmTributary24TxInputCodeErrorMux-A(644), alarmTributary25TxInputCodeErrorMux-A(645), alarmTributary26TxInputCodeErrorMux-A(646), alarmTributary27TxInputCodeErrorMux-A(647), alarmTributary28TxInputCodeErrorMux-A(648), alarmTributary1RxOutputFailedMux-A(649), alarmTributary2RxOutputFailedMux-A(650), alarmTributary3RxOutputFailedMux-A(651), alarmTributary4RxOutputFailedMux-A(652), alarmTributary5RxOutputFailedMux-A(653), alarmTributary6RxOutputFailedMux-A(654), alarmTributary7RxOutputFailedMux-A(655), alarmTributary8RxOutputFailedMux-A(656), alarmTributary9RxOutputFailedMux-A(657), alarmTributary10RxOutputFailedMux-A(658), alarmTributary11RxOutputFailedMux-A(659), alarmTributary12RxOutputFailedMux-A(660), alarmTributary13RxOutputFailedMux-A(661), alarmTributary14RxOutputFailedMux-A(662), alarmTributary15RxOutputFailedMux-A(663), alarmTributary16RxOutputFailedMux-A(664), alarmTributary17RxOutputFailedMux-A(665), alarmTributary18RxOutputFailedMux-A(666), alarmTributary19RxOutputFailedMux-A(667), alarmTributary20RxOutputFailedMux-A(668), alarmTributary21RxOutputFailedMux-A(669), alarmTributary22RxOutputFailedMux-A(670), alarmTributary23RxOutputFailedMux-A(671), alarmTributary24RxOutputFailedMux-A(672), alarmTributary25RxOutputFailedMux-A(673), alarmTributary26RxOutputFailedMux-A(674), alarmTributary27RxOutputFailedMux-A(675), alarmTributary28RxOutputFailedMux-A(676), alarmOC3STM1TxInputAISMux-A(677), alarmOC3STM1TxInputLOSMux-A(678), alarmOC3STM1TxInputDegradedMux-A(679), alarmE3DS31TxInputAISMux-A(680), alarmDS32TxInputAISMux-A(681), alarmDS33TxInputAISMux-A(682), alarmE3DS31TxInputLOSMux-A(683), alarmDS32TxInputLOSMux-A(684), alarmDS33TxInputLOSMux-A(685), alarmE3DS31TxInputCodeErrorMux-A(686), alarmDS32TxInputCodeErrorMux-A(687), alarmDS33TxInputCodeErrorMux-A(688), alarmE3DS31TxInputOOFMux-A(689), alarmDS32TxInputOOFMux-A(690), alarmDS33TxInputOOFMux-A(691), alarmE3DS31RxOutputFailMux-A(692), alarmDS32RxOutputFailMux-A(693), alarmDS33RxOutputFailMux-A(694), alarmWayside1TxInputAISMux-A(695), alarmWayside2TxInputAISMux-A(696), alarmWayside3TxInputAISMux-A(697), alarmWayside1TxInputLOSMux-A(698), alarmWayside2TxInputLOSMux-A(699), alarmWayside3TxInputLOSMux-A(700), alarmWayside1TxInputCodeErrorMux-A(701), alarmWayside2TxInputCodeErrorMux-A(702), alarmWayside3TxInputCodeErrorMux-A(703), alarmWayside1RxOutputFailMux-A(704), alarmWayside2RxOutputFailMux-A(705), alarmWayside3RxOutputFailMux-A(706), alarmFpgaDownloadMux-A(707), alarmFpgaSettingsMux-A(708), alarmUnknownCardMux-A(709), alarmFwNotUpgradedMux-A(710), alarmReplaceMeMux-A(711), alarmTxClockInputLossMux-B(712), alarmTributary1TxInputAISMux-B(713), alarmTributary2TxInputAISMux-B(714), alarmTributary3TxInputAISMux-B(715), alarmTributary4TxInputAISMux-B(716), alarmTributary5TxInputAISMux-B(717), alarmTributary6TxInputAISMux-B(718), alarmTributary7TxInputAISMux-B(719), alarmTributary8TxInputAISMux-B(720), alarmTributary9TxInputAISMux-B(721), alarmTributary10TxInputAISMux-B(722), alarmTributary11TxInputAISMux-B(723), alarmTributary12TxInputAISMux-B(724), alarmTributary13TxInputAISMux-B(725), alarmTributary14TxInputAISMux-B(726), alarmTributary15TxInputAISMux-B(727), alarmTributary16TxInputAISMux-B(728), alarmTributary17TxInputAISMux-B(729), alarmTributary18TxInputAISMux-B(730), alarmTributary19TxInputAISMux-B(731), alarmTributary20TxInputAISMux-B(732), alarmTributary21TxInputAISMux-B(733), alarmTributary22TxInputAISMux-B(734), alarmTributary23TxInputAISMux-B(735), alarmTributary24TxInputAISMux-B(736), alarmTributary25TxInputAISMux-B(737), alarmTributary26TxInputAISMux-B(738), alarmTributary27TxInputAISMux-B(739), alarmTributary28TxInputAISMux-B(740), alarmTributary1TxInputLOSMux-B(741), alarmTributary2TxInputLOSMux-B(742), alarmTributary3TxInputLOSMux-B(743), alarmTributary4TxInputLOSMux-B(744), alarmTributary5TxInputLOSMux-B(745), alarmTributary6TxInputLOSMux-B(746), alarmTributary7TxInputLOSMux-B(747), alarmTributary8TxInputLOSMux-B(748), alarmTributary9TxInputLOSMux-B(749), alarmTributary10TxInputLOSMux-B(750), alarmTributary11TxInputLOSMux-B(751), alarmTributary12TxInputLOSMux-B(752), alarmTributary13TxInputLOSMux-B(753), alarmTributary14TxInputLOSMux-B(754), alarmTributary15TxInputLOSMux-B(755), alarmTributary16TxInputLOSMux-B(756), alarmTributary17TxInputLOSMux-B(757), alarmTributary18TxInputLOSMux-B(758), alarmTributary19TxInputLOSMux-B(759), alarmTributary20TxInputLOSMux-B(760), alarmTributary21TxInputLOSMux-B(761), alarmTributary22TxInputLOSMux-B(762), alarmTributary23TxInputLOSMux-B(763), alarmTributary24TxInputLOSMux-B(764), alarmTributary25TxInputLOSMux-B(765), alarmTributary26TxInputLOSMux-B(766), alarmTributary27TxInputLOSMux-B(767), alarmTributary28TxInputLOSMux-B(768), alarmTributary1TxInputCodeErrorMux-B(769), alarmTributary2TxInputCodeErrorMux-B(770), alarmTributary3TxInputCodeErrorMux-B(771), alarmTributary4TxInputCodeErrorMux-B(772), alarmTributary5TxInputCodeErrorMux-B(773), alarmTributary6TxInputCodeErrorMux-B(774), alarmTributary7TxInputCodeErrorMux-B(775), alarmTributary8TxInputCodeErrorMux-B(776), alarmTributary9TxInputCodeErrorMux-B(777), alarmTributary10TxInputCodeErrorMux-B(778), alarmTributary11TxInputCodeErrorMux-B(779), alarmTributary12TxInputCodeErrorMux-B(780), alarmTributary13TxInputCodeErrorMux-B(781), alarmTributary14TxInputCodeErrorMux-B(782), alarmTributary15TxInputCodeErrorMux-B(783), alarmTributary16TxInputCodeErrorMux-B(784), alarmTributary17TxInputCodeErrorMux-B(785), alarmTributary18TxInputCodeErrorMux-B(786), alarmTributary19TxInputCodeErrorMux-B(787), alarmTributary20TxInputCodeErrorMux-B(788), alarmTributary21TxInputCodeErrorMux-B(789), alarmTributary22TxInputCodeErrorMux-B(790), alarmTributary23TxInputCodeErrorMux-B(791), alarmTributary24TxInputCodeErrorMux-B(792), alarmTributary25TxInputCodeErrorMux-B(793), alarmTributary26TxInputCodeErrorMux-B(794), alarmTributary27TxInputCodeErrorMux-B(795), alarmTributary28TxInputCodeErrorMux-B(796), alarmTributary1RxOutputFailedMux-B(797), alarmTributary2RxOutputFailedMux-B(798), alarmTributary3RxOutputFailedMux-B(799), alarmTributary4RxOutputFailedMux-B(800), alarmTributary5RxOutputFailedMux-B(801), alarmTributary6RxOutputFailedMux-B(802), alarmTributary7RxOutputFailedMux-B(803), alarmTributary8RxOutputFailedMux-B(804), alarmTributary9RxOutputFailedMux-B(805), alarmTributary10RxOutputFailedMux-B(806), alarmTributary11RxOutputFailedMux-B(807), alarmTributary12RxOutputFailedMux-B(808), alarmTributary13RxOutputFailedMux-B(809), alarmTributary14RxOutputFailedMux-B(810), alarmTributary15RxOutputFailedMux-B(811), alarmTributary16RxOutputFailedMux-B(812), alarmTributary17RxOutputFailedMux-B(813), alarmTributary18RxOutputFailedMux-B(814), alarmTributary19RxOutputFailedMux-B(815), alarmTributary20RxOutputFailedMux-B(816), alarmTributary21RxOutputFailedMux-B(817), alarmTributary22RxOutputFailedMux-B(818), alarmTributary23RxOutputFailedMux-B(819), alarmTributary24RxOutputFailedMux-B(820), alarmTributary25RxOutputFailedMux-B(821), alarmTributary26RxOutputFailedMux-B(822), alarmTributary27RxOutputFailedMux-B(823), alarmTributary28RxOutputFailedMux-B(824), alarmOC3STM1TxInputAISMux-B(825), alarmOC3STM1TxInputLOSMux-B(826), alarmOC3STM1TxInputDegradedMux-B(827), alarmE3DS31TxInputAISMux-B(828), alarmDS32TxInputAISMux-B(829), alarmDS33TxInputAISMux-B(830), alarmE3DS31TxInputLOSMux-B(831), alarmDS32TxInputLOSMux-B(832), alarmDS33TxInputLOSMux-B(833), alarmE3DS31TxInputCodeErrorMux-B(834), alarmDS32TxInputCodeErrorMux-B(835), alarmDS33TxInputCodeErrorMux-B(836), alarmE3DS31TxInputOOFMux-B(837), alarmDS32TxInputOOFMux-B(838), alarmDS33TxInputOOFMux-B(839), alarmE3DS31RxOutputFailMux-B(840), alarmDS32RxOutputFailMux-B(841), alarmDS33RxOutputFailMux-B(842), alarmWayside1TxInputAISMux-B(843), alarmWayside2TxInputAISMux-B(844), alarmWayside3TxInputAISMux-B(845), alarmWayside1TxInputLOSMux-B(846), alarmWayside2TxInputLOSMux-B(847), alarmWayside3TxInputLOSMux-B(848), alarmWayside1TxInputCodeErrorMux-B(849), alarmWayside2TxInputCodeErrorMux-B(850), alarmWayside3TxInputCodeErrorMux-B(851), alarmWayside1RxOutputFailMux-B(852), alarmWayside2RxOutputFailMux-B(853), alarmWayside3RxOutputFailMux-B(854), alarmFpgaDownloadMux-B(855), alarmFpgaSettingsMux-B(856), alarmUnknownCardMux-B(857), alarmFwNotUpgradedMux-B(858), alarmReplaceMeMux-B(859), alarmRxEquipmentRfu-A(860), alarmTxEquipmentRfu-A(861), alarmEepromRfu-A(862), alarmSynthesizerRfu-A(863), alarmPALowRfu-A(864), alarmPAOuputOutOfRangeRfu-A(865), alarmCalibrationTblMismatchRfu-A(866), alarmTxSilentFailureRfu-A(867), alarmSwDownloadErrorRfu-A(868), alarmSettingsRfu-A(869), alarmSwNotUpgradedRfu-A(870), alarmFailRfu-A(871), alarmReplaceMeRfu-A(872), alarmRxEquipmentRfu-B(873), alarmTxEquipmentRfu-B(874), alarmEepromRfu-B(875), alarmSynthesizerRfu-B(876), alarmPALowRfu-B(877), alarmPAOuputOutOfRangeRfu-B(878), alarmCalibrationTblMismatchRfu-B(879), alarmTxSilentFailureRfu-B(880), alarmSwDownloadErrorRfu-B(881), alarmSettingsRfu-B(882), alarmSwNotUpgradedRfu-B(883), alarmFailRfu-B(884), alarmReplaceMeRfu-B(885), alarmEthernetOver64kPort1LinkTestFailOpt-1(886), alarmEthernetOver64kPort2LinkTestFailOpt-1(887), alarmAISInsertG703V11Opt-1(888), alarmTxInputLossG703V11Opt-1(889), alarmFpgaDownloadOpt-1(890), alarmFpgaSettingsOpt-1(891), alarmUnknownCardOpt-1(892), alarmFwNotUpgradedOpt-1(893), alarmNotSupportedInSimplexOpt-1(894), alarmCeTunnelCommFailOpt-1(895), alarmCeTunnelConflictOpt-1(896), alarmReplaceMeOpt-1(897), alarmEthernetOver64kPort1LinkTestFailOpt-2(898), alarmEthernetOver64kPort2LinkTestFailOpt-2(899), alarmAISInsertG703V11Opt-2(900), alarmTxInputLossG703V11Opt-2(901), alarmFpgaDownloadOpt-2(902), alarmFpgaSettingsOpt-2(903), alarmUnknownCardOpt-2(904), alarmFwNotUpgradedOpt-2(905), alarmNotSupportedInSimplexOpt-2(906), alarmCeTunnelCommFailOpt-2(907), alarmCeTunnelConflictOpt-2(908), alarmReplaceMeOpt-2(909), alarmTributary1TxInputAIS(910), alarmTributary2TxInputAIS(911), alarmTributary3TxInputAIS(912), alarmTributary4TxInputAIS(913), alarmTributary5TxInputAIS(914), alarmTributary6TxInputAIS(915), alarmTributary7TxInputAIS(916), alarmTributary8TxInputAIS(917), alarmTributary9TxInputAIS(918), alarmTributary10TxInputAIS(919), alarmTributary11TxInputAIS(920), alarmTributary12TxInputAIS(921), alarmTributary13TxInputAIS(922), alarmTributary14TxInputAIS(923), alarmTributary15TxInputAIS(924), alarmTributary16TxInputAIS(925), alarmTributary17TxInputAIS(926), alarmTributary18TxInputAIS(927), alarmTributary19TxInputAIS(928), alarmTributary20TxInputAIS(929), alarmTributary21TxInputAIS(930), alarmTributary22TxInputAIS(931), alarmTributary23TxInputAIS(932), alarmTributary24TxInputAIS(933), alarmTributary25TxInputAIS(934), alarmTributary26TxInputAIS(935), alarmTributary27TxInputAIS(936), alarmTributary28TxInputAIS(937), alarmTributary1TxInputLOS(938), alarmTributary2TxInputLOS(939), alarmTributary3TxInputLOS(940), alarmTributary4TxInputLOS(941), alarmTributary5TxInputLOS(942), alarmTributary6TxInputLOS(943), alarmTributary7TxInputLOS(944), alarmTributary8TxInputLOS(945), alarmTributary9TxInputLOS(946), alarmTributary10TxInputLOS(947), alarmTributary11TxInputLOS(948), alarmTributary12TxInputLOS(949), alarmTributary13TxInputLOS(950), alarmTributary14TxInputLOS(951), alarmTributary15TxInputLOS(952), alarmTributary16TxInputLOS(953), alarmTributary17TxInputLOS(954), alarmTributary18TxInputLOS(955), alarmTributary19TxInputLOS(956), alarmTributary20TxInputLOS(957), alarmTributary21TxInputLOS(958), alarmTributary22TxInputLOS(959), alarmTributary23TxInputLOS(960), alarmTributary24TxInputLOS(961), alarmTributary25TxInputLOS(962), alarmTributary26TxInputLOS(963), alarmTributary27TxInputLOS(964), alarmTributary28TxInputLOS(965), alarmTributary1TxInputCodeError(966), alarmTributary2TxInputCodeError(967), alarmTributary3TxInputCodeError(968), alarmTributary4TxInputCodeError(969), alarmTributary5TxInputCodeError(970), alarmTributary6TxInputCodeError(971), alarmTributary7TxInputCodeError(972), alarmTributary8TxInputCodeError(973), alarmTributary9TxInputCodeError(974), alarmTributary10TxInputCodeError(975), alarmTributary11TxInputCodeError(976), alarmTributary12TxInputCodeError(977), alarmTributary13TxInputCodeError(978), alarmTributary14TxInputCodeError(979), alarmTributary15TxInputCodeError(980), alarmTributary16TxInputCodeError(981), alarmTributary17TxInputCodeError(982), alarmTributary18TxInputCodeError(983), alarmTributary19TxInputCodeError(984), alarmTributary20TxInputCodeError(985), alarmTributary21TxInputCodeError(986), alarmTributary22TxInputCodeError(987), alarmTributary23TxInputCodeError(988), alarmTributary24TxInputCodeError(989), alarmTributary25TxInputCodeError(990), alarmTributary26TxInputCodeError(991), alarmTributary27TxInputCodeError(992), alarmTributary28TxInputCodeError(993), alarmTributary1RxOutputFailed(994), alarmTributary2RxOutputFailed(995), alarmTributary3RxOutputFailed(996), alarmTributary4RxOutputFailed(997), alarmTributary5RxOutputFailed(998), alarmTributary6RxOutputFailed(999) } " ::= { alarmSummary 5 } allAlarmsCompressed2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (126)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains compressed alarm data. Each bit of the object corresponds to one alarm and indicates either ALARM (1) or NO ALARM (0). Alarms are mapped into bits 0 through 999 where bit 0 is the left-most (most significant) bit in the stream in accordance with SNMPv2 BITS format. { alarmTributary7RxOutputFailed(0), alarmTributary8RxOutputFailed(1), alarmTributary9RxOutputFailed(2), alarmTributary10RxOutputFailed(3), alarmTributary11RxOutputFailed(4), alarmTributary12RxOutputFailed(5), alarmTributary13RxOutputFailed(6), alarmTributary14RxOutputFailed(7), alarmTributary15RxOutputFailed(8), alarmTributary16RxOutputFailed(9), alarmTributary17RxOutputFailed(10), alarmTributary18RxOutputFailed(11), alarmTributary19RxOutputFailed(12), alarmTributary20RxOutputFailed(13), alarmTributary21RxOutputFailed(14), alarmTributary22RxOutputFailed(15), alarmTributary23RxOutputFailed(16), alarmTributary24RxOutputFailed(17), alarmTributary25RxOutputFailed(18), alarmTributary26RxOutputFailed(19), alarmTributary27RxOutputFailed(20), alarmTributary28RxOutputFailed(21), alarmE3DS31TxInputAIS(22), alarmDS32TxInputAIS(23), alarmDS33TxInputAIS(24), alarmE3DS31TxInputLOS(25), alarmDS32TxInputLOS(26), alarmDS33TxInputLOS(27), alarmE3DS31TxInputCodeError(28), alarmDS32TxInputCodeError(29), alarmDS33TxInputCodeError(30), alarmE3DS31TxInputOOF(31), alarmDS32TxInputOOF(32), alarmDS33TxInputOOF(33), alarmE3DS31RxOutputFail(34), alarmDS32RxOutputFail(35), alarmDS33RxOutputFail(36), alarmWayside1TxInputAIS(37), alarmWayside2TxInputAIS(38), alarmWayside3TxInputAIS(39), alarmWayside1TxInputLOS(40), alarmWayside2TxInputLOS(41), alarmWayside3TxInputLOS(42), alarmWayside1TxInputCodeError(43), alarmWayside2TxInputCodeError(44), alarmWayside3TxInputCodeError(45), alarmWayside1RxOutputFail(46), alarmWayside2RxOutputFail(47), alarmWayside3RxOutputFail(48), alarmUnknownCardSdm(49), alarmSynthesizerModem-A(50), alarmSynthesizerModem-B(51), alarm100BTPort1LinkTestFailMux-A(52), alarm100BTPort2LinkTestFailMux-A(53), alarm100BTPort1LinkTestFailMux-B(54), alarm100BTPort2LinkTestFailMux-B(55), alarm100BTPort1LinkTestFail(56), alarm100BTPort2LinkTestFail(57), alarmModemCablesCrossed(58), alarmDemuxSyncLoss-A(59), alarmDemuxSyncLoss-B(60), alarmBandwidthNotSupported(61), alarmRfuMutingForTelemetryFailure-A(62), alarmRfuMutingForTelemetryFailure-B(63), alarmWrongOptionModem-A(64), alarmWrongOptionModem-B(65), alarmOC3STM1TxRdiTrib1Mux-A(66), alarmOC3STM1TxRdiTrib1Mux-B(67), alarmTimingReferenceRadioMux-A(68), alarmTimingReferenceRadioMux-B(69), alarmTimingReferencePdhMux-A(70), alarmTimingReferencePdhMux-B(71), alarmTimingReferenceInputMux-A(72), alarmTimingReferenceInputMux-B(73), alarmTimingReferenceExtClockInput1Mux-A(74), alarmTimingReferenceExtClockInput1Mux-B(75), alarmTimingReferenceExtClockInput2Mux-A(76), alarmTimingReferenceExtClockInput2Mux-B(77), alarmTimingReferenceSpurMux-A(78), alarmTimingReferenceSpurMux-B(79), alarmRemoteSyncLoss-A(80), alarmRemoteSyncLoss-B(81), alarmTimingReferencePdh(82), alarmTimingReferenceExtClockInput1(83), alarmTimingReferenceExtClockInput2(84), alarmOptCardConfigurationConflict(85) } " ::= { alarmSummary 6 } allAlarmsCompressed3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(126)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains compressed alarm data. Each bit of the object corresponds to one alarm and indicates either ALARM (1) or NO ALARM (0). Alarms are mapped into bits 0 through 999 where bit 0 is the left-most (most significant) bit in the stream in accordance with SNMPv2 BITS format. { } " ::= { alarmSummary 7 } allAlarmsCompressedCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is incremented when any compressed alarm object is changed. The count rolls over. Suggested use is to check if this value differs from your last request and refresh the alarm objects if necessary." ::= { alarmSummary 8 } -- System alarms alarmSystem OBJECT IDENTIFIER ::= { alarm 20 } alarmNoEthernetMacAddress OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that no MAC Address is assigned to the SPU controller. A unique MAC address should be provided by Harris." ::= { alarmSystem 1 } alarmDhcpClientFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DHCP failed to set IP address of Ethernet interface ." ::= { alarmSystem 2 } alarmCableModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a cable problem between SPU and RFU A." ::= { alarmSystem 5 } alarmCableModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a cable problem between SPU and RFU B." ::= { alarmSystem 6 } alarmModemCablesCrossed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the modem cables for RFU A and RFU B are crossed." ::= { alarmSystem 7 } alarmReboot OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that system is rebooting. This alarm will disapper in 2 min after system is up." ::= { alarmSystem 8 } alarmBandwidthNotSupported OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the configured bandwidth is not supported by the modem." ::= { alarmSystem 9 } alarmMmcFileSystem OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the File System in MMC card is broken or not accessible." ::= { alarmSystem 11 } alarmAtpcHighPower OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that system is in ATPC mode and Tx output power is at High level (for 1+0 and 1+1 systems)." ::= { alarmSystem 12 } alarmTpcTimeLimit OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that system is in ATPC or DTPC modes and cannot increase Tx output power due to exceed time limitation. (for 1+0 and 1+1 systems)." ::= { alarmSystem 13 } alarmConfigFile OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that system could not restore configuration from the config files and used default values." ::= { alarmSystem 14 } alarmLoadCorrupted OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that current software load has missing or corrupted components." ::= { alarmSystem 15 } alarmAtpcHighPowerTx-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Channel A is in ATPC mode and Tx output power is at High level (for 2+0 system)." ::= { alarmSystem 16 } alarmTpcTimeLimit-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Channel A is in ATPC or DTPC modes and cannot increase Tx output power due to exceed time limitation. (for 2+0 system)." ::= { alarmSystem 17 } alarmAtpcHighPowerTx-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Channel B is in ATPC mode and Tx output power is at High level (for 2+0 system)." ::= { alarmSystem 18 } alarmTpcTimeLimit-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Channel B is in ATPC or DTPC modes and cannot increase Tx output power due to exceed time limitation. (for 2+0 system)." ::= { alarmSystem 19 } -- System Communication alarms alarmSystemComm OBJECT IDENTIFIER ::= { alarmSystem 30 } alarmSpiCommModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that communication between Controller and Modem A is broken." ::= { alarmSystemComm 1 } alarmSpiCommModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that communication between Controller and Modem B is broken." ::= { alarmSystemComm 2 } alarmSpiCommMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that communication between Controller and MUX A is broken." ::= { alarmSystemComm 3 } alarmSpiCommMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that communication between Controller and MUX B is broken." ::= { alarmSystemComm 4 } alarmSpiCommOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that communication between Controller and Optional Card 1 is broken." ::= { alarmSystemComm 5 } alarmSpiCommOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that communication between Controller and Optional Card 2 is broken." ::= { alarmSystemComm 6 } alarmRfuComm-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that communication between SPU and RFU A is broken." ::= { alarmSystemComm 11 } alarmRfuComm-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that communication between SPU and RFU B is broken." ::= { alarmSystemComm 12 } alarmRfLinkServiceChannelCommFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no service channel communication with the remote radio (over RF link) ." ::= { alarmSystemComm 21 } -- System Card Mismatch Alarms alarmCardMismatch OBJECT IDENTIFIER ::= { alarmSystem 40 } alarmMismatchMux OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A and Mux B cards doesn't match each other." ::= { alarmCardMismatch 1 } alarmMismatchSdm OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM card does not match system capability (active MUX card)." ::= { alarmCardMismatch 2 } alarmMismatchModem OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem A and Modem B cards doesn't match each other." ::= { alarmCardMismatch 3 } alarmMismatchRfu OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A and RFU B are different types." ::= { alarmCardMismatch 11 } alarmBER OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that CBER is above the threshold (for 1+0 and 1+1 systems)." ::= { alarmSystem 51 } alarmBER-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that CBER is above the threshold in channel A (for 2+0 system)." ::= { alarmSystem 52 } alarmBER-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that CBER is above the threshold in channel B (for 2+0 system)." ::= { alarmSystem 53 } alarmOptCardConfigurationConflict OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the two optional cards installed conflict with one another." ::= { alarmSystem 61 } -- Path alarms alarmPath OBJECT IDENTIFIER ::= { alarm 40 } alarmSignalDegradedModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Modem A Signal Degraded alarm, meaning that the modem's signal quality after equalization is degraded, and the System UBER is above the threshold." ::= { alarmPath 1 } alarmSignalDegradedModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Modem B Signal Degraded alarm, meaning that the modem's signal quality after equalization is degraded, and the System UBER is above the threshold." ::= { alarmPath 2 } alarmRslLowRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RSL of RFU A is below the system threshold." ::= { alarmPath 3 } alarmRslLowRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RSL of RFU B is below the system threshold." ::= { alarmPath 4 } alarmAlignment OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx modem online DADE cannot align A and B signals." ::= { alarmPath 5 } alarmRemoteAnySyncLoss OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx remote online demux cannot synchronize on main traffic." ::= { alarmPath 6 } alarmPathDemuxSyncLoss-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx demux A is in sync loss due to path problem." ::= { alarmPath 7 } alarmPathDemuxSyncLoss-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx demux B is in sync loss due to path problem." ::= { alarmPath 8 } -- *** Removed: alarmPathDemuxWaysideSyncLoss-A { alarmPath 9 } *** -- *** Removed: alarmPathDemuxWaysideSyncLoss-B { alarmPath 10 } *** alarmRemoteSyncLoss-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates MUX A has a sync loss condition detected by the remote equipment. This is due to one or more problems, indicated by other remote sync loss alarms." ::= { alarmPath 15 } alarmRemoteSyncLoss-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates MUX B has a sync loss condition detected by the remote equipment. This is due to one or more problems, indicated by other remote sync loss alarms." ::= { alarmPath 16 } -- Control Active Alarms alarmControlActive OBJECT IDENTIFIER ::= { alarm 55 } -- Lock Alarms alarmLock OBJECT IDENTIFIER ::= { alarmControlActive 1 } alarmLockTx-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Transmitter is manually switched and locked on side A." ::= { alarmLock 1 } alarmLockTx-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Transmitter is manually switched and locked on side B." ::= { alarmLock 2 } alarmLockRxRfuDecoder-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx RFU and Modem Decoder is manually switched and locked on side A." ::= { alarmLock 3 } alarmLockRxRfuDecoder-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx RFU and Modem Decoder is manually switched and locked on side B." ::= { alarmLock 4 } alarmLockRxDadeDemux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx Modem DADE and Demux is manually switched and locked on side A." ::= { alarmLock 5 } alarmLockRxDadeDemux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx Modem DADE and Demux is manually switched and locked on side B." ::= { alarmLock 6 } -- Loopback Alarms alarmLoopback OBJECT IDENTIFIER ::= { alarmControlActive 2 } alarmModemIFLoopback OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem Interface loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmLoopback 2 } alarmMuxHighLevelLoopback OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux High level loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmLoopback 3 } alarmTributaryLoopback OBJECT IDENTIFIER ::= { alarmLoopback 10 } alarmTributaryLocalInputLoopback1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 1 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 1 } alarmTributaryLocalInputLoopback2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 2 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 2 } alarmTributaryLocalInputLoopback3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 3 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 3 } alarmTributaryLocalInputLoopback4 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 4 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 4 } alarmTributaryLocalInputLoopback5 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 5 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 5 } alarmTributaryLocalInputLoopback6 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 6 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 6 } alarmTributaryLocalInputLoopback7 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 7 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 7 } alarmTributaryLocalInputLoopback8 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 8 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 8 } alarmTributaryLocalInputLoopback9 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 9 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 9 } alarmTributaryLocalInputLoopback10 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 10 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 10 } alarmTributaryLocalInputLoopback11 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 11 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 11 } alarmTributaryLocalInputLoopback12 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 12 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 12 } alarmTributaryLocalInputLoopback13 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 13 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 13 } alarmTributaryLocalInputLoopback14 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 14 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 14 } alarmTributaryLocalInputLoopback15 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 15 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 15 } alarmTributaryLocalInputLoopback16 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 16 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 16 } alarmTributaryLocalInputLoopback17 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 17 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 17 } alarmTributaryLocalInputLoopback18 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 18 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 18 } alarmTributaryLocalInputLoopback19 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 19 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 19 } alarmTributaryLocalInputLoopback20 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 20 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 20 } alarmTributaryLocalInputLoopback21 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 21 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 21 } alarmTributaryLocalInputLoopback22 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 22 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 22 } alarmTributaryLocalInputLoopback23 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 23 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 23 } alarmTributaryLocalInputLoopback24 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 24 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 24 } alarmTributaryLocalInputLoopback25 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 25 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 25 } alarmTributaryLocalInputLoopback26 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 26 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 26 } alarmTributaryLocalInputLoopback27 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 27 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 27 } alarmTributaryLocalInputLoopback28 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 28 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 28 } alarmTributaryLocalRadioLoopback1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 1 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 31 } alarmTributaryLocalRadioLoopback2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 2 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 32 } alarmTributaryLocalRadioLoopback3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 3 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 33 } alarmTributaryLocalRadioLoopback4 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 4 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 34 } alarmTributaryLocalRadioLoopback5 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 5 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 35 } alarmTributaryLocalRadioLoopback6 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 6 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 36 } alarmTributaryLocalRadioLoopback7 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 7 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 37 } alarmTributaryLocalRadioLoopback8 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 8 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 38 } alarmTributaryLocalRadioLoopback9 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 9 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 39 } alarmTributaryLocalRadioLoopback10 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 10 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 40 } alarmTributaryLocalRadioLoopback11 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 11 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 41 } alarmTributaryLocalRadioLoopback12 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 12 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 42 } alarmTributaryLocalRadioLoopback13 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 13 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 43 } alarmTributaryLocalRadioLoopback14 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 14 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 44 } alarmTributaryLocalRadioLoopback15 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 15 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 45 } alarmTributaryLocalRadioLoopback16 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 16 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 46 } alarmTributaryLocalRadioLoopback17 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 17 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 47 } alarmTributaryLocalRadioLoopback18 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 18 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 48 } alarmTributaryLocalRadioLoopback19 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 19 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 49 } alarmTributaryLocalRadioLoopback20 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 20 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 50 } alarmTributaryLocalRadioLoopback21 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 21 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 51 } alarmTributaryLocalRadioLoopback22 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 22 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 52 } alarmTributaryLocalRadioLoopback23 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 23 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 53 } alarmTributaryLocalRadioLoopback24 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 24 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 54 } alarmTributaryLocalRadioLoopback25 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 25 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 55 } alarmTributaryLocalRadioLoopback26 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 26 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 56 } alarmTributaryLocalRadioLoopback27 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 27 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 57 } alarmTributaryLocalRadioLoopback28 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 28 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 58 } alarmTributaryRemoteRadioLoopback1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 1 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 61 } alarmTributaryRemoteRadioLoopback2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 2 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 62 } alarmTributaryRemoteRadioLoopback3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 3 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 63 } alarmTributaryRemoteRadioLoopback4 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 4 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 64 } alarmTributaryRemoteRadioLoopback5 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 5 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 65 } alarmTributaryRemoteRadioLoopback6 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 6 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 66 } alarmTributaryRemoteRadioLoopback7 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 7 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 67 } alarmTributaryRemoteRadioLoopback8 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 8 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 68 } alarmTributaryRemoteRadioLoopback9 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 9 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 69 } alarmTributaryRemoteRadioLoopback10 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 10 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 70 } alarmTributaryRemoteRadioLoopback11 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 11 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 71 } alarmTributaryRemoteRadioLoopback12 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 12 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 72 } alarmTributaryRemoteRadioLoopback13 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 13 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 73 } alarmTributaryRemoteRadioLoopback14 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 14 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 74 } alarmTributaryRemoteRadioLoopback15 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 15 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 75 } alarmTributaryRemoteRadioLoopback16 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 16 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 76 } alarmTributaryRemoteRadioLoopback17 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 17 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 77 } alarmTributaryRemoteRadioLoopback18 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 18 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 78 } alarmTributaryRemoteRadioLoopback19 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 19 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 79 } alarmTributaryRemoteRadioLoopback20 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 20 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 80 } alarmTributaryRemoteRadioLoopback21 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 21 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 81 } alarmTributaryRemoteRadioLoopback22 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 22 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 82 } alarmTributaryRemoteRadioLoopback23 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 23 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 83 } alarmTributaryRemoteRadioLoopback24 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 24 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 84 } alarmTributaryRemoteRadioLoopback25 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 25 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 85 } alarmTributaryRemoteRadioLoopback26 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 26 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 86 } alarmTributaryRemoteRadioLoopback27 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 27 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 87 } alarmTributaryRemoteRadioLoopback28 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that DS1/E1 Tributary 28 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 88 } alarmTributaryRemoteRadioLoopbackRequest1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 1 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 91 } alarmTributaryRemoteRadioLoopbackRequest2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 2 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 92 } alarmTributaryRemoteRadioLoopbackRequest3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 3 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 93 } alarmTributaryRemoteRadioLoopbackRequest4 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 4 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 94 } alarmTributaryRemoteRadioLoopbackRequest5 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 5 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 95 } alarmTributaryRemoteRadioLoopbackRequest6 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 6 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 96 } alarmTributaryRemoteRadioLoopbackRequest7 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 7 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 97 } alarmTributaryRemoteRadioLoopbackRequest8 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 8 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 98 } alarmTributaryRemoteRadioLoopbackRequest9 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 9 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 99 } alarmTributaryRemoteRadioLoopbackRequest10 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 10 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 100 } alarmTributaryRemoteRadioLoopbackRequest11 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 11 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 101 } alarmTributaryRemoteRadioLoopbackRequest12 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 12 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 102 } alarmTributaryRemoteRadioLoopbackRequest13 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 13 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 103 } alarmTributaryRemoteRadioLoopbackRequest14 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 14 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 104 } alarmTributaryRemoteRadioLoopbackRequest15 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 15 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 105 } alarmTributaryRemoteRadioLoopbackRequest16 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 16 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 106 } alarmTributaryRemoteRadioLoopbackRequest17 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 17 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 107 } alarmTributaryRemoteRadioLoopbackRequest18 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 18 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 108 } alarmTributaryRemoteRadioLoopbackRequest19 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 19 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 109 } alarmTributaryRemoteRadioLoopbackRequest20 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 20 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 110 } alarmTributaryRemoteRadioLoopbackRequest21 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 21 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 111 } alarmTributaryRemoteRadioLoopbackRequest22 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 22 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 112 } alarmTributaryRemoteRadioLoopbackRequest23 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 23 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 113 } alarmTributaryRemoteRadioLoopbackRequest24 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 24 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 114 } alarmTributaryRemoteRadioLoopbackRequest25 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 25 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 115 } alarmTributaryRemoteRadioLoopbackRequest26 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 26 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 116 } alarmTributaryRemoteRadioLoopbackRequest27 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 27 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 117 } alarmTributaryRemoteRadioLoopbackRequest28 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the DS1/E1 Tributary 28 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmTributaryLoopback 118 } alarmOC3STM1Loopback OBJECT IDENTIFIER ::= { alarmLoopback 20 } alarmOC3STM1LocalInputLoopback OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX Local Input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmOC3STM1Loopback 1 } alarmOC3STM1LocalRadioLoopback OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX Local Radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmOC3STM1Loopback 2 } alarmOC3STM1RemoteRadioLoopback OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX Remote Radio Loopback is set." ::= { alarmOC3STM1Loopback 3 } alarmOC3STM1RemoteRadioLoopbackRequest OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the OC-3/STM-1 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmOC3STM1Loopback 4 } alarmE3DS3Loopback OBJECT IDENTIFIER ::= { alarmLoopback 30 } alarmE3DS3LocalInputLoopback1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM E3/DS3 Tributary 1 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 1 } alarmDS3LocalInputLoopback2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM DS3 Tributary 2 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 2 } alarmDS3LocalInputLoopback3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM DS3 Tributary 3 local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 3 } alarmE3DS3LocalRadioLoopback1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM E3/DS3 Tributary 1 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 11 } alarmDS3LocalRadioLoopback2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM DS3 Tributary 2 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 12 } alarmDS3LocalRadioLoopback3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM DS3 Tributary 3 local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 13 } alarmE3DS3RemoteRadioLoopback1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM E3/DS3 Tributary 1 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 21 } alarmDS3RemoteRadioLoopback2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM DS3 Tributary 2 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 22 } alarmDS3RemoteRadioLoopback3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM DS3 Tributary 3 remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 23 } alarmE3DS3RemoteRadioLoopbackRequest1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM E3/DS3 Tributary 1 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 31 } alarmDS3RemoteRadioLoopbackRequest2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM E3/DS3 Tributary 2 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 32 } alarmDS3RemoteRadioLoopbackRequest3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM E3/DS3 Tributary 3 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmE3DS3Loopback 33 } alarmWaysideLoopback OBJECT IDENTIFIER ::= { alarmLoopback 100 } alarmWaysideLocalInputLoopback1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 1 Local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 1 } alarmWaysideLocalInputLoopback2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 2 Local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 2 } alarmWaysideLocalInputLoopback3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 3 Local input loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 3 } alarmWaysideLocalRadioLoopback1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 1 Local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 11 } alarmWaysideLocalRadioLoopback2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 2 Local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 12 } alarmWaysideLocalRadioLoopback3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 3 Local radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 13 } alarmWaysideRemoteRadioLoopback1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 1 Remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 21 } alarmWaysideRemoteRadioLoopback2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 2 Remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 22 } alarmWaysideRemoteRadioLoopback3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 3 Remote radio loopback is set. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 23 } alarmWaysideRemoteRadioLoopbackRequest1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 1 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 31 } alarmWaysideRemoteRadioLoopbackRequest2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 2 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 32 } alarmWaysideRemoteRadioLoopbackRequest3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Wayside 3 radio loopback was requested from the remote radio. This alarm is valid for all configurations except 2+0." ::= { alarmWaysideLoopback 33 } -- Loopback Alarms alarmLoopback-A OBJECT IDENTIFIER ::= { alarmControlActive 6 } alarmModemIFLoopback-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem A Interface loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmLoopback-A 2 } alarmMuxHighLevelLoopback-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A High level loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmLoopback-A 3 } alarmTributaryLoopback-A OBJECT IDENTIFIER ::= { alarmLoopback-A 10 } alarmTributaryLocalInputLoopback1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 1 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 1 } alarmTributaryLocalInputLoopback2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 2 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 2 } alarmTributaryLocalInputLoopback3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 3 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 3 } alarmTributaryLocalInputLoopback4-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 4 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 4 } alarmTributaryLocalInputLoopback5-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 5 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 5 } alarmTributaryLocalInputLoopback6-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 6 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 6 } alarmTributaryLocalInputLoopback7-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 7 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 7 } alarmTributaryLocalInputLoopback8-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 8 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 8 } alarmTributaryLocalInputLoopback9-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 9 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 9 } alarmTributaryLocalInputLoopback10-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 10 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 10 } alarmTributaryLocalInputLoopback11-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 11 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 11 } alarmTributaryLocalInputLoopback12-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 12 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 12 } alarmTributaryLocalInputLoopback13-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 13 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 13 } alarmTributaryLocalInputLoopback14-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 14 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 14 } alarmTributaryLocalInputLoopback15-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 15 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 15 } alarmTributaryLocalInputLoopback16-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 16 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 16 } alarmTributaryLocalInputLoopback17-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 17 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 17 } alarmTributaryLocalInputLoopback18-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 18 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 18 } alarmTributaryLocalInputLoopback19-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 19 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 19 } alarmTributaryLocalInputLoopback20-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 20 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 20 } alarmTributaryLocalInputLoopback21-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 21 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 21 } alarmTributaryLocalInputLoopback22-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 22 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 22 } alarmTributaryLocalInputLoopback23-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 23 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 23 } alarmTributaryLocalInputLoopback24-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 24 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 24 } alarmTributaryLocalInputLoopback25-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 25 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 25 } alarmTributaryLocalInputLoopback26-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 26 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 26 } alarmTributaryLocalInputLoopback27-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 27 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 27 } alarmTributaryLocalInputLoopback28-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 28 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 28 } alarmTributaryLocalRadioLoopback1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 1 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 31 } alarmTributaryLocalRadioLoopback2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 2 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 32 } alarmTributaryLocalRadioLoopback3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 3 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 33 } alarmTributaryLocalRadioLoopback4-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 4 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 34 } alarmTributaryLocalRadioLoopback5-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 5 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 35 } alarmTributaryLocalRadioLoopback6-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 6 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 36 } alarmTributaryLocalRadioLoopback7-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 7 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 37 } alarmTributaryLocalRadioLoopback8-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 8 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 38 } alarmTributaryLocalRadioLoopback9-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 9 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 39 } alarmTributaryLocalRadioLoopback10-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 10 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 40 } alarmTributaryLocalRadioLoopback11-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 11 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 41 } alarmTributaryLocalRadioLoopback12-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 12 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 42 } alarmTributaryLocalRadioLoopback13-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 13 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 43 } alarmTributaryLocalRadioLoopback14-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 14 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 44 } alarmTributaryLocalRadioLoopback15-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 15 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 45 } alarmTributaryLocalRadioLoopback16-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 16 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 46 } alarmTributaryLocalRadioLoopback17-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 17 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 47 } alarmTributaryLocalRadioLoopback18-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 18 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 48 } alarmTributaryLocalRadioLoopback19-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 19 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 49 } alarmTributaryLocalRadioLoopback20-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 20 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 50 } alarmTributaryLocalRadioLoopback21-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 21 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 51 } alarmTributaryLocalRadioLoopback22-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 22 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 52 } alarmTributaryLocalRadioLoopback23-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 23 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 53 } alarmTributaryLocalRadioLoopback24-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 24 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 54 } alarmTributaryLocalRadioLoopback25-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 25 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 55 } alarmTributaryLocalRadioLoopback26-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 26 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 56 } alarmTributaryLocalRadioLoopback27-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 27 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 57 } alarmTributaryLocalRadioLoopback28-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 28 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 58 } alarmTributaryRemoteRadioLoopback1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 1 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 61 } alarmTributaryRemoteRadioLoopback2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 2 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 62 } alarmTributaryRemoteRadioLoopback3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 3 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 63 } alarmTributaryRemoteRadioLoopback4-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 4 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 64 } alarmTributaryRemoteRadioLoopback5-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 5 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 65 } alarmTributaryRemoteRadioLoopback6-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 6 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 66 } alarmTributaryRemoteRadioLoopback7-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 7 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 67 } alarmTributaryRemoteRadioLoopback8-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 8 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 68 } alarmTributaryRemoteRadioLoopback9-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 9 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 69 } alarmTributaryRemoteRadioLoopback10-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 10 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 70 } alarmTributaryRemoteRadioLoopback11-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 11 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 71 } alarmTributaryRemoteRadioLoopback12-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 12 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 72 } alarmTributaryRemoteRadioLoopback13-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 13 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 73 } alarmTributaryRemoteRadioLoopback14-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 14 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 74 } alarmTributaryRemoteRadioLoopback15-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 15 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 75 } alarmTributaryRemoteRadioLoopback16-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 16 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 76 } alarmTributaryRemoteRadioLoopback17-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 17 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 77 } alarmTributaryRemoteRadioLoopback18-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 18 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 78 } alarmTributaryRemoteRadioLoopback19-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 19 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 79 } alarmTributaryRemoteRadioLoopback20-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 20 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 80 } alarmTributaryRemoteRadioLoopback21-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 21 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 81 } alarmTributaryRemoteRadioLoopback22-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 22 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 82 } alarmTributaryRemoteRadioLoopback23-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 23 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 83 } alarmTributaryRemoteRadioLoopback24-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 24 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 84 } alarmTributaryRemoteRadioLoopback25-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 25 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 85 } alarmTributaryRemoteRadioLoopback26-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 26 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 86 } alarmTributaryRemoteRadioLoopback27-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 27 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 87 } alarmTributaryRemoteRadioLoopback28-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 28 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 88 } alarmTributaryRemoteRadioLoopbackRequest1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 1 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 91 } alarmTributaryRemoteRadioLoopbackRequest2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 2 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 92 } alarmTributaryRemoteRadioLoopbackRequest3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 3 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 93 } alarmTributaryRemoteRadioLoopbackRequest4-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 4 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 94 } alarmTributaryRemoteRadioLoopbackRequest5-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 5 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 95 } alarmTributaryRemoteRadioLoopbackRequest6-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 6 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 96 } alarmTributaryRemoteRadioLoopbackRequest7-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 7 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 97 } alarmTributaryRemoteRadioLoopbackRequest8-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 8 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 98 } alarmTributaryRemoteRadioLoopbackRequest9-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 9 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 99 } alarmTributaryRemoteRadioLoopbackRequest10-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 10 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 100 } alarmTributaryRemoteRadioLoopbackRequest11-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 11 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 101 } alarmTributaryRemoteRadioLoopbackRequest12-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 12 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 102 } alarmTributaryRemoteRadioLoopbackRequest13-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 13 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 103 } alarmTributaryRemoteRadioLoopbackRequest14-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 14 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 104 } alarmTributaryRemoteRadioLoopbackRequest15-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 15 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 105 } alarmTributaryRemoteRadioLoopbackRequest16-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 16 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 106 } alarmTributaryRemoteRadioLoopbackRequest17-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 17 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 107 } alarmTributaryRemoteRadioLoopbackRequest18-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 18 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 108 } alarmTributaryRemoteRadioLoopbackRequest19-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 19 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 109 } alarmTributaryRemoteRadioLoopbackRequest20-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 20 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 110 } alarmTributaryRemoteRadioLoopbackRequest21-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 21 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 111 } alarmTributaryRemoteRadioLoopbackRequest22-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 22 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 112 } alarmTributaryRemoteRadioLoopbackRequest23-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 23 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 113 } alarmTributaryRemoteRadioLoopbackRequest24-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 24 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 114 } alarmTributaryRemoteRadioLoopbackRequest25-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 25 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 115 } alarmTributaryRemoteRadioLoopbackRequest26-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 26 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 116 } alarmTributaryRemoteRadioLoopbackRequest27-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 27 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 117 } alarmTributaryRemoteRadioLoopbackRequest28-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS1/E1 Tributary 28 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-A 118 } alarmOC3STM1Loopback-A OBJECT IDENTIFIER ::= { alarmLoopback-A 20 } alarmOC3STM1LocalInputLoopback-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX A Local Input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmOC3STM1Loopback-A 1 } alarmOC3STM1LocalRadioLoopback-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX A Local Radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmOC3STM1Loopback-A 2 } alarmOC3STM1RemoteRadioLoopback-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX A Remote Radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmOC3STM1Loopback-A 3 } alarmOC3STM1RemoteRadioLoopbackRequest-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that the OC-3/STM-1 MUX A radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmOC3STM1Loopback-A 4 } alarmE3DS3Loopback-A OBJECT IDENTIFIER ::= { alarmLoopback-A 30 } alarmE3DS3LocalInputLoopback1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A E3/DS3 Tributary 1 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 1 } alarmDS3LocalInputLoopback2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS3 Tributary 2 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 2 } alarmDS3LocalInputLoopback3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS3 Tributary 3 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 3 } alarmE3DS3LocalRadioLoopback1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A E3/DS3 Tributary 1 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 11 } alarmDS3LocalRadioLoopback2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS3 Tributary 2 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 12 } alarmDS3LocalRadioLoopback3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS3 Tributary 3 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 13 } alarmE3DS3RemoteRadioLoopback1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A E3/DS3 Tributary 1 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 21 } alarmDS3RemoteRadioLoopback2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS3 Tributary 2 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 22 } alarmDS3RemoteRadioLoopback3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A DS3 Tributary 3 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 23 } alarmE3DS3RemoteRadioLoopbackRequest1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A E3/DS3 Tributary 1 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 31 } alarmDS3RemoteRadioLoopbackRequest2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A E3/DS3 Tributary 2 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 32 } alarmDS3RemoteRadioLoopbackRequest3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A E3/DS3 Tributary 1 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-A 33 } alarmWaysideLoopback-A OBJECT IDENTIFIER ::= { alarmLoopback-A 100 } alarmWaysideLocalInputLoopback1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 1 Local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 1 } alarmWaysideLocalInputLoopback2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 2 Local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 2 } alarmWaysideLocalInputLoopback3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 3 Local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 3 } alarmWaysideLocalRadioLoopback1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 1 Local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 11 } alarmWaysideLocalRadioLoopback2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 2 Local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 12 } alarmWaysideLocalRadioLoopback3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 3 Local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 13 } alarmWaysideRemoteRadioLoopback1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 1 Remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 21 } alarmWaysideRemoteRadioLoopback2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 2 Remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 22 } alarmWaysideRemoteRadioLoopback3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 3 Remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 23 } alarmWaysideRemoteRadioLoopbackRequest1-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 1 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 31 } alarmWaysideRemoteRadioLoopbackRequest2-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 2 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 32 } alarmWaysideRemoteRadioLoopbackRequest3-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX A Wayside 3 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-A 33 } -- Loopback Alarms alarmLoopback-B OBJECT IDENTIFIER ::= { alarmControlActive 8 } alarmModemIFLoopback-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem A Interface loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmLoopback-B 2 } alarmMuxHighLevelLoopback-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A High level loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmLoopback-B 3 } alarmTributaryLoopback-B OBJECT IDENTIFIER ::= { alarmLoopback-B 10 } alarmTributaryLocalInputLoopback1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 1 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 1 } alarmTributaryLocalInputLoopback2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 2 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 2 } alarmTributaryLocalInputLoopback3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 3 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 3 } alarmTributaryLocalInputLoopback4-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 4 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 4 } alarmTributaryLocalInputLoopback5-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 5 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 5 } alarmTributaryLocalInputLoopback6-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 6 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 6 } alarmTributaryLocalInputLoopback7-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 7 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 7 } alarmTributaryLocalInputLoopback8-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 8 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 8 } alarmTributaryLocalInputLoopback9-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 9 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 9 } alarmTributaryLocalInputLoopback10-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 10 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 10 } alarmTributaryLocalInputLoopback11-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 11 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 11 } alarmTributaryLocalInputLoopback12-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 12 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 12 } alarmTributaryLocalInputLoopback13-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 13 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 13 } alarmTributaryLocalInputLoopback14-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 14 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 14 } alarmTributaryLocalInputLoopback15-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 15 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 15 } alarmTributaryLocalInputLoopback16-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 16 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 16 } alarmTributaryLocalInputLoopback17-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 17 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 17 } alarmTributaryLocalInputLoopback18-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 18 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 18 } alarmTributaryLocalInputLoopback19-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 19 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 19 } alarmTributaryLocalInputLoopback20-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 20 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 20 } alarmTributaryLocalInputLoopback21-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 21 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 21 } alarmTributaryLocalInputLoopback22-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 22 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 22 } alarmTributaryLocalInputLoopback23-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 23 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 23 } alarmTributaryLocalInputLoopback24-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 24 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 24 } alarmTributaryLocalInputLoopback25-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 25 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 25 } alarmTributaryLocalInputLoopback26-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 26 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 26 } alarmTributaryLocalInputLoopback27-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 27 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 27 } alarmTributaryLocalInputLoopback28-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 28 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 28 } alarmTributaryLocalRadioLoopback1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 1 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 31 } alarmTributaryLocalRadioLoopback2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 2 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 32 } alarmTributaryLocalRadioLoopback3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 3 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 33 } alarmTributaryLocalRadioLoopback4-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 4 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 34 } alarmTributaryLocalRadioLoopback5-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 5 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 35 } alarmTributaryLocalRadioLoopback6-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 6 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 36 } alarmTributaryLocalRadioLoopback7-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 7 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 37 } alarmTributaryLocalRadioLoopback8-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 8 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 38 } alarmTributaryLocalRadioLoopback9-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 9 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 39 } alarmTributaryLocalRadioLoopback10-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 10 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 40 } alarmTributaryLocalRadioLoopback11-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 11 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 41 } alarmTributaryLocalRadioLoopback12-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 12 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 42 } alarmTributaryLocalRadioLoopback13-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 13 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 43 } alarmTributaryLocalRadioLoopback14-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 14 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 44 } alarmTributaryLocalRadioLoopback15-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 15 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 45 } alarmTributaryLocalRadioLoopback16-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 16 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 46 } alarmTributaryLocalRadioLoopback17-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 17 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 47 } alarmTributaryLocalRadioLoopback18-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 18 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 48 } alarmTributaryLocalRadioLoopback19-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 19 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 49 } alarmTributaryLocalRadioLoopback20-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 20 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 50 } alarmTributaryLocalRadioLoopback21-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 21 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 51 } alarmTributaryLocalRadioLoopback22-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 22 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 52 } alarmTributaryLocalRadioLoopback23-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 23 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 53 } alarmTributaryLocalRadioLoopback24-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 24 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 54 } alarmTributaryLocalRadioLoopback25-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 25 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 55 } alarmTributaryLocalRadioLoopback26-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 26 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 56 } alarmTributaryLocalRadioLoopback27-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 27 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 57 } alarmTributaryLocalRadioLoopback28-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 28 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 58 } alarmTributaryRemoteRadioLoopback1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 1 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 61 } alarmTributaryRemoteRadioLoopback2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 2 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 62 } alarmTributaryRemoteRadioLoopback3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 3 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 63 } alarmTributaryRemoteRadioLoopback4-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 4 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 64 } alarmTributaryRemoteRadioLoopback5-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 5 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 65 } alarmTributaryRemoteRadioLoopback6-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 6 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 66 } alarmTributaryRemoteRadioLoopback7-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 7 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 67 } alarmTributaryRemoteRadioLoopback8-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 8 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 68 } alarmTributaryRemoteRadioLoopback9-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 9 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 69 } alarmTributaryRemoteRadioLoopback10-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 10 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 70 } alarmTributaryRemoteRadioLoopback11-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 11 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 71 } alarmTributaryRemoteRadioLoopback12-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 12 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 72 } alarmTributaryRemoteRadioLoopback13-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 13 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 73 } alarmTributaryRemoteRadioLoopback14-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 14 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 74 } alarmTributaryRemoteRadioLoopback15-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 15 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 75 } alarmTributaryRemoteRadioLoopback16-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 16 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 76 } alarmTributaryRemoteRadioLoopback17-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 17 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 77 } alarmTributaryRemoteRadioLoopback18-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 18 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 78 } alarmTributaryRemoteRadioLoopback19-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 19 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 79 } alarmTributaryRemoteRadioLoopback20-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 20 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 80 } alarmTributaryRemoteRadioLoopback21-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 21 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 81 } alarmTributaryRemoteRadioLoopback22-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 22 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 82 } alarmTributaryRemoteRadioLoopback23-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 23 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 83 } alarmTributaryRemoteRadioLoopback24-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 24 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 84 } alarmTributaryRemoteRadioLoopback25-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 25 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 85 } alarmTributaryRemoteRadioLoopback26-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 26 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 86 } alarmTributaryRemoteRadioLoopback27-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 27 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 87 } alarmTributaryRemoteRadioLoopback28-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 28 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 88 } alarmTributaryRemoteRadioLoopbackRequest1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 1 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 91 } alarmTributaryRemoteRadioLoopbackRequest2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 2 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 92 } alarmTributaryRemoteRadioLoopbackRequest3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 3 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 93 } alarmTributaryRemoteRadioLoopbackRequest4-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 4 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 94 } alarmTributaryRemoteRadioLoopbackRequest5-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 5 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 95 } alarmTributaryRemoteRadioLoopbackRequest6-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 6 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 96 } alarmTributaryRemoteRadioLoopbackRequest7-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 7 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 97 } alarmTributaryRemoteRadioLoopbackRequest8-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 8 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 98 } alarmTributaryRemoteRadioLoopbackRequest9-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 9 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 99 } alarmTributaryRemoteRadioLoopbackRequest10-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 10 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 100 } alarmTributaryRemoteRadioLoopbackRequest11-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 11 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 101 } alarmTributaryRemoteRadioLoopbackRequest12-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 12 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 102 } alarmTributaryRemoteRadioLoopbackRequest13-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 13 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 103 } alarmTributaryRemoteRadioLoopbackRequest14-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 14 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 104 } alarmTributaryRemoteRadioLoopbackRequest15-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 15 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 105 } alarmTributaryRemoteRadioLoopbackRequest16-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 16 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 106 } alarmTributaryRemoteRadioLoopbackRequest17-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 17 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 107 } alarmTributaryRemoteRadioLoopbackRequest18-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 18 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 108 } alarmTributaryRemoteRadioLoopbackRequest19-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 19 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 109 } alarmTributaryRemoteRadioLoopbackRequest20-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 20 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 110 } alarmTributaryRemoteRadioLoopbackRequest21-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 21 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 111 } alarmTributaryRemoteRadioLoopbackRequest22-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 22 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 112 } alarmTributaryRemoteRadioLoopbackRequest23-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 23 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 113 } alarmTributaryRemoteRadioLoopbackRequest24-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 24 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 114 } alarmTributaryRemoteRadioLoopbackRequest25-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 25 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 115 } alarmTributaryRemoteRadioLoopbackRequest26-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 26 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 116 } alarmTributaryRemoteRadioLoopbackRequest27-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 27 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 117 } alarmTributaryRemoteRadioLoopbackRequest28-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS1/E1 Tributary 28 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmTributaryLoopback-B 118 } alarmOC3STM1Loopback-B OBJECT IDENTIFIER ::= { alarmLoopback-B 20 } alarmOC3STM1LocalInputLoopback-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX B Local Input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmOC3STM1Loopback-B 1 } alarmOC3STM1LocalRadioLoopback-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX B Local Radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmOC3STM1Loopback-B 2 } alarmOC3STM1RemoteRadioLoopback-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX B Remote Radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmOC3STM1Loopback-B 3 } alarmOC3STM1RemoteRadioLoopbackRequest-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX B radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmOC3STM1Loopback-B 4 } alarmE3DS3Loopback-B OBJECT IDENTIFIER ::= { alarmLoopback-B 30 } alarmE3DS3LocalInputLoopback1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B E3/DS3 Tributary 1 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 1 } alarmDS3LocalInputLoopback2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS3 Tributary 2 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 2 } alarmDS3LocalInputLoopback3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS3 Tributary 3 local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 3 } alarmE3DS3LocalRadioLoopback1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B E3/DS3 Tributary 1 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 11 } alarmDS3LocalRadioLoopback2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS3 Tributary 2 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 12 } alarmDS3LocalRadioLoopback3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS3 Tributary 3 local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 13 } alarmE3DS3RemoteRadioLoopback1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B E3/DS3 Tributary 1 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 21 } alarmDS3RemoteRadioLoopback2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS3 Tributary 2 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 22 } alarmDS3RemoteRadioLoopback3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B DS3 Tributary 3 remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 23 } alarmE3DS3RemoteRadioLoopbackRequest1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B E3/DS3 Tributary 1 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 31 } alarmDS3RemoteRadioLoopbackRequest2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B E3/DS3 Tributary 2 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 32 } alarmDS3RemoteRadioLoopbackRequest3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B E3/DS3 Tributary 3 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmE3DS3Loopback-B 33 } alarmWaysideLoopback-B OBJECT IDENTIFIER ::= { alarmLoopback-B 100 } alarmWaysideLocalInputLoopback1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 1 Local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 1 } alarmWaysideLocalInputLoopback2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 2 Local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 2 } alarmWaysideLocalInputLoopback3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 3 Local input loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 3 } alarmWaysideLocalRadioLoopback1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 1 Local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 11 } alarmWaysideLocalRadioLoopback2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 2 Local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 12 } alarmWaysideLocalRadioLoopback3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 3 Local radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 13 } alarmWaysideRemoteRadioLoopback1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 1 Remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 21 } alarmWaysideRemoteRadioLoopback2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 2 Remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 22 } alarmWaysideRemoteRadioLoopback3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 3 Remote radio loopback is set. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 23 } alarmWaysideRemoteRadioLoopbackRequest1-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 1 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 31 } alarmWaysideRemoteRadioLoopbackRequest2-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 2 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 32 } alarmWaysideRemoteRadioLoopbackRequest3-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that MUX B Wayside 3 radio loopback was requested from the remote radio. This alarm is only valid for 2+0 configuration." ::= { alarmWaysideLoopback-B 33 } alarmRfuMuted-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU side A is manually muted." ::= { alarmControlActive 13 } alarmRfuMuted-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU side B is manually muted." ::= { alarmControlActive 14 } alarmTxCwTone-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that CW-tone mode is set on Tx A." ::= { alarmControlActive 15 } alarmTxCwTone-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that CW-tone mode is set on Tx B." ::= { alarmControlActive 16 } -- Exetrnal Alarms alarmExternal OBJECT IDENTIFIER ::= { alarm 60 } alarmControllerExternalInput-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates an Controller External Input 1 alarm, meaning the alarm input is at logic low or ground." ::= { alarmExternal 1 } alarmControllerExternalInput-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates an Controller External Input 2 alarm, meaning the alarm input is at logic low or ground." ::= { alarmExternal 2 } -- Relays/Alarms Card 1 Alarms alarmExternalOptCard-1 OBJECT IDENTIFIER ::= { alarmExternal 10 } alarmOptCard1ExternalInput-0 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 0." ::= { alarmExternalOptCard-1 1 } alarmOptCard1ExternalInput-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 1." ::= { alarmExternalOptCard-1 2 } alarmOptCard1ExternalInput-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 2." ::= { alarmExternalOptCard-1 3 } alarmOptCard1ExternalInput-3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 3." ::= { alarmExternalOptCard-1 4 } alarmOptCard1ExternalInput-4 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 4." ::= { alarmExternalOptCard-1 5 } alarmOptCard1ExternalInput-5 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 5." ::= { alarmExternalOptCard-1 6 } alarmOptCard1ExternalInput-6 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 6." ::= { alarmExternalOptCard-1 7 } alarmOptCard1ExternalInput-7 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 7." ::= { alarmExternalOptCard-1 8 } alarmOptCard1ExternalInput-8 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 8." ::= { alarmExternalOptCard-1 9 } alarmOptCard1ExternalInput-9 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 9." ::= { alarmExternalOptCard-1 10 } alarmOptCard1ExternalInput-10 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 10." ::= { alarmExternalOptCard-1 11 } alarmOptCard1ExternalInput-11 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 11." ::= { alarmExternalOptCard-1 12 } alarmOptCard1ExternalInput-12 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 12." ::= { alarmExternalOptCard-1 13 } alarmOptCard1ExternalInput-13 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 13." ::= { alarmExternalOptCard-1 14 } alarmOptCard1ExternalInput-14 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 14." ::= { alarmExternalOptCard-1 15 } alarmOptCard1ExternalInput-15 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 15." ::= { alarmExternalOptCard-1 16 } alarmOptCard1ExternalInput-16 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 16." ::= { alarmExternalOptCard-1 17 } alarmOptCard1ExternalInput-17 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 17." ::= { alarmExternalOptCard-1 18 } alarmOptCard1ExternalInput-18 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 18." ::= { alarmExternalOptCard-1 19 } alarmOptCard1ExternalInput-19 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 19." ::= { alarmExternalOptCard-1 20 } alarmOptCard1ExternalInput-20 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 20." ::= { alarmExternalOptCard-1 21 } alarmOptCard1ExternalInput-21 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 21." ::= { alarmExternalOptCard-1 22 } alarmOptCard1ExternalInput-22 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 22." ::= { alarmExternalOptCard-1 23 } alarmOptCard1ExternalInput-23 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 23." ::= { alarmExternalOptCard-1 24 } alarmOptCard1ExternalInput-24 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 24." ::= { alarmExternalOptCard-1 25 } alarmOptCard1ExternalInput-25 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 25." ::= { alarmExternalOptCard-1 26 } alarmOptCard1ExternalInput-26 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 26." ::= { alarmExternalOptCard-1 27 } alarmOptCard1ExternalInput-27 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 27." ::= { alarmExternalOptCard-1 28 } alarmOptCard1ExternalInput-28 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 28." ::= { alarmExternalOptCard-1 29 } alarmOptCard1ExternalInput-29 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 1 External Input 29." ::= { alarmExternalOptCard-1 30 } -- Relays/Alarms Card 2 Alarms alarmExternalOptCard-2 OBJECT IDENTIFIER ::= { alarmExternal 20 } alarmOptCard2ExternalInput-0 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 0." ::= { alarmExternalOptCard-2 1 } alarmOptCard2ExternalInput-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 1." ::= { alarmExternalOptCard-2 2 } alarmOptCard2ExternalInput-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 2." ::= { alarmExternalOptCard-2 3 } alarmOptCard2ExternalInput-3 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 3." ::= { alarmExternalOptCard-2 4 } alarmOptCard2ExternalInput-4 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 4." ::= { alarmExternalOptCard-2 5 } alarmOptCard2ExternalInput-5 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 5." ::= { alarmExternalOptCard-2 6 } alarmOptCard2ExternalInput-6 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 6." ::= { alarmExternalOptCard-2 7 } alarmOptCard2ExternalInput-7 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 7." ::= { alarmExternalOptCard-2 8 } alarmOptCard2ExternalInput-8 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 8." ::= { alarmExternalOptCard-2 9 } alarmOptCard2ExternalInput-9 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 9." ::= { alarmExternalOptCard-2 10 } alarmOptCard2ExternalInput-10 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 10." ::= { alarmExternalOptCard-2 11 } alarmOptCard2ExternalInput-11 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 11." ::= { alarmExternalOptCard-2 12 } alarmOptCard2ExternalInput-12 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 12." ::= { alarmExternalOptCard-2 13 } alarmOptCard2ExternalInput-13 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 13." ::= { alarmExternalOptCard-2 14 } alarmOptCard2ExternalInput-14 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 14." ::= { alarmExternalOptCard-2 15 } alarmOptCard2ExternalInput-15 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 15." ::= { alarmExternalOptCard-2 16 } alarmOptCard2ExternalInput-16 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 16." ::= { alarmExternalOptCard-2 17 } alarmOptCard2ExternalInput-17 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 17." ::= { alarmExternalOptCard-2 18 } alarmOptCard2ExternalInput-18 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 18." ::= { alarmExternalOptCard-2 19 } alarmOptCard2ExternalInput-19 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 19." ::= { alarmExternalOptCard-2 20 } alarmOptCard2ExternalInput-20 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 20." ::= { alarmExternalOptCard-2 21 } alarmOptCard2ExternalInput-21 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 21." ::= { alarmExternalOptCard-2 22 } alarmOptCard2ExternalInput-22 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 22." ::= { alarmExternalOptCard-2 23 } alarmOptCard2ExternalInput-23 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 23." ::= { alarmExternalOptCard-2 24 } alarmOptCard2ExternalInput-24 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 24." ::= { alarmExternalOptCard-2 25 } alarmOptCard2ExternalInput-25 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 25." ::= { alarmExternalOptCard-2 26 } alarmOptCard2ExternalInput-26 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 26." ::= { alarmExternalOptCard-2 27 } alarmOptCard2ExternalInput-27 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 27." ::= { alarmExternalOptCard-2 28 } alarmOptCard2ExternalInput-28 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 28." ::= { alarmExternalOptCard-2 29 } alarmOptCard2ExternalInput-29 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates alarm state of Optional Relays/Alarms Card 2 External Input 29." ::= { alarmExternalOptCard-2 30 } -- Card Absent Alarms alarmCardAbsent OBJECT IDENTIFIER ::= { alarm 70 } alarmAbsentMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no module inserted and powered in the MUX A slot." ::= { alarmCardAbsent 1 } alarmAbsentMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no module inserted and powered in the MUX B slot." ::= { alarmCardAbsent 2 } alarmAbsentModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no module inserted and powered in the MODEM A slot." ::= { alarmCardAbsent 3 } alarmAbsentModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no module inserted and powered in the MODEM B slot." ::= { alarmCardAbsent 4 } alarmAbsentOptionalCard1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no module inserted and powered in the OPTIONAL CARD 1 slot." ::= { alarmCardAbsent 5 } alarmAbsentOptionalCard2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no module inserted and powered in the OPTIONAL CARD 2 slot." ::= { alarmCardAbsent 6 } alarmAbsentRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no RFU A module connected and powered to SPU." ::= { alarmCardAbsent 7 } alarmAbsentRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no RFU B module connected and powered to SPU." ::= { alarmCardAbsent 8 } alarmAbsentSDM OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no module inserted and powered in the SDM slot." ::= { alarmCardAbsent 9 } -- Modem A Alarms alarmModemA OBJECT IDENTIFIER ::= { alarm 90 } alarmSynthesizerModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates Modem A Synthesizer alarm." ::= { alarmModemA 1 } alarmWrongOptionModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem A is configured with an incorrect setting." ::= { alarmModemA 2 } alarmFpgaDownloadModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem A FPGA download failed." ::= { alarmModemA 50 } alarmFpgaSettingsModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem A Setting file download failed." ::= { alarmModemA 51 } alarmUnknownCardModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in MODEM A slot is unknown." ::= { alarmModemA 53 } alarmFwNotUpgradedModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem A currently running firmware is different than firmware for Modem in SPU Primary software bank." ::= { alarmModemA 54 } alarmReplaceMeModem-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in MODEM A slot shall be replaced." ::= { alarmModemA 60 } -- Modem B Alarms alarmModemB OBJECT IDENTIFIER ::= { alarm 100 } alarmSynthesizerModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates Modem B Synthesizer alarm." ::= { alarmModemB 1 } alarmWrongOptionModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem B is configured with an incorrect setting." ::= { alarmModemB 2 } alarmFpgaDownloadModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem B FPGA download failed." ::= { alarmModemB 50 } alarmFpgaSettingsModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem B Setting file download failed." ::= { alarmModemB 51 } alarmUnknownCardModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in MODEM B slot is unknown." ::= { alarmModemB 53 } alarmFwNotUpgradedModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Modem B currently running firmware is different than firmware for Modem in SPU Primary software bank." ::= { alarmModemB 54 } alarmReplaceMeModem-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in MODEM B slot shall be replaced." ::= { alarmModemB 60 } -- Mux A Alarms alarmMuxA OBJECT IDENTIFIER ::= { alarm 110 } alarmTxClockInputLossMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no external clock input from customer on Mux A." ::= { alarmMuxA 1 } alarmDemuxSyncLoss-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx demux A is in sync loss. This is due to one or more problems, indicated by other sync loss alarms." ::= { alarmMuxA 2 } -- Mux A Tributary Alarms alarmTributaryMuxA OBJECT IDENTIFIER ::= { alarmMuxA 10 } alarmTributary1TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 1 input." ::= { alarmTributaryMuxA 1 } alarmTributary2TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 2 input." ::= { alarmTributaryMuxA 2 } alarmTributary3TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 3 input." ::= { alarmTributaryMuxA 3 } alarmTributary4TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 4 input." ::= { alarmTributaryMuxA 4 } alarmTributary5TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 5 input." ::= { alarmTributaryMuxA 5 } alarmTributary6TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 6 input." ::= { alarmTributaryMuxA 6 } alarmTributary7TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 7 input." ::= { alarmTributaryMuxA 7 } alarmTributary8TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 8 input." ::= { alarmTributaryMuxA 8 } alarmTributary9TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 9 input." ::= { alarmTributaryMuxA 9 } alarmTributary10TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 10 input." ::= { alarmTributaryMuxA 10 } alarmTributary11TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 11 input." ::= { alarmTributaryMuxA 11 } alarmTributary12TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 12 input." ::= { alarmTributaryMuxA 12 } alarmTributary13TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 13 input." ::= { alarmTributaryMuxA 13 } alarmTributary14TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 14 input." ::= { alarmTributaryMuxA 14 } alarmTributary15TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 15 input." ::= { alarmTributaryMuxA 15 } alarmTributary16TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 16 input." ::= { alarmTributaryMuxA 16 } alarmTributary17TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 17 input." ::= { alarmTributaryMuxA 17 } alarmTributary18TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 18 input." ::= { alarmTributaryMuxA 18 } alarmTributary19TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 19 input." ::= { alarmTributaryMuxA 19 } alarmTributary20TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 20 input." ::= { alarmTributaryMuxA 20 } alarmTributary21TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 21 input." ::= { alarmTributaryMuxA 21 } alarmTributary22TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 22 input." ::= { alarmTributaryMuxA 22 } alarmTributary23TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 23 input." ::= { alarmTributaryMuxA 23 } alarmTributary24TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 24 input." ::= { alarmTributaryMuxA 24 } alarmTributary25TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 25 input." ::= { alarmTributaryMuxA 25 } alarmTributary26TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 26 input." ::= { alarmTributaryMuxA 26 } alarmTributary27TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 27 input." ::= { alarmTributaryMuxA 27 } alarmTributary28TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has AIS on Tributary 28 input." ::= { alarmTributaryMuxA 28 } alarmTributary1TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 1 input." ::= { alarmTributaryMuxA 31 } alarmTributary2TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 2 input." ::= { alarmTributaryMuxA 32 } alarmTributary3TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 3 input." ::= { alarmTributaryMuxA 33 } alarmTributary4TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 4 input." ::= { alarmTributaryMuxA 34 } alarmTributary5TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 5 input." ::= { alarmTributaryMuxA 35 } alarmTributary6TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 6 input." ::= { alarmTributaryMuxA 36 } alarmTributary7TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 7 input." ::= { alarmTributaryMuxA 37 } alarmTributary8TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 8 input." ::= { alarmTributaryMuxA 38 } alarmTributary9TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 9 input." ::= { alarmTributaryMuxA 39 } alarmTributary10TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 10 input." ::= { alarmTributaryMuxA 40 } alarmTributary11TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 11 input." ::= { alarmTributaryMuxA 41 } alarmTributary12TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 12 input." ::= { alarmTributaryMuxA 42 } alarmTributary13TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 13 input." ::= { alarmTributaryMuxA 43 } alarmTributary14TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 14 input." ::= { alarmTributaryMuxA 44 } alarmTributary15TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 15 input." ::= { alarmTributaryMuxA 45 } alarmTributary16TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 16 input." ::= { alarmTributaryMuxA 46 } alarmTributary17TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 17 input." ::= { alarmTributaryMuxA 47 } alarmTributary18TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 18 input." ::= { alarmTributaryMuxA 48 } alarmTributary19TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 19 input." ::= { alarmTributaryMuxA 49 } alarmTributary20TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 20 input." ::= { alarmTributaryMuxA 50 } alarmTributary21TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 21 input." ::= { alarmTributaryMuxA 51 } alarmTributary22TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 22 input." ::= { alarmTributaryMuxA 52 } alarmTributary23TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 23 input." ::= { alarmTributaryMuxA 53 } alarmTributary24TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 24 input." ::= { alarmTributaryMuxA 54 } alarmTributary25TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 25 input." ::= { alarmTributaryMuxA 55 } alarmTributary26TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 26 input." ::= { alarmTributaryMuxA 56 } alarmTributary27TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 27 input." ::= { alarmTributaryMuxA 57 } alarmTributary28TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has no signal on Tributary 28 input." ::= { alarmTributaryMuxA 58 } alarmTributary1TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 1 input." ::= { alarmTributaryMuxA 61 } alarmTributary2TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 2 input." ::= { alarmTributaryMuxA 62 } alarmTributary3TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 3 input." ::= { alarmTributaryMuxA 63 } alarmTributary4TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 4 input." ::= { alarmTributaryMuxA 64 } alarmTributary5TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 5 input." ::= { alarmTributaryMuxA 65 } alarmTributary6TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 6 input." ::= { alarmTributaryMuxA 66 } alarmTributary7TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 7 input." ::= { alarmTributaryMuxA 67 } alarmTributary8TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 8 input." ::= { alarmTributaryMuxA 68 } alarmTributary9TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 9 input." ::= { alarmTributaryMuxA 69 } alarmTributary10TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 10 input." ::= { alarmTributaryMuxA 70 } alarmTributary11TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 11 input." ::= { alarmTributaryMuxA 71 } alarmTributary12TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 12 input." ::= { alarmTributaryMuxA 72 } alarmTributary13TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 13 input." ::= { alarmTributaryMuxA 73 } alarmTributary14TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 14 input." ::= { alarmTributaryMuxA 74 } alarmTributary15TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 15 input." ::= { alarmTributaryMuxA 75 } alarmTributary16TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 16 input." ::= { alarmTributaryMuxA 76 } alarmTributary17TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 17 input." ::= { alarmTributaryMuxA 77 } alarmTributary18TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 18 input." ::= { alarmTributaryMuxA 78 } alarmTributary19TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 19 input." ::= { alarmTributaryMuxA 79 } alarmTributary20TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 20 input." ::= { alarmTributaryMuxA 80 } alarmTributary21TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 21 input." ::= { alarmTributaryMuxA 81 } alarmTributary22TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 22 input." ::= { alarmTributaryMuxA 82 } alarmTributary23TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 23 input." ::= { alarmTributaryMuxA 83 } alarmTributary24TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 24 input." ::= { alarmTributaryMuxA 84 } alarmTributary25TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 25 input." ::= { alarmTributaryMuxA 85 } alarmTributary26TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 26 input." ::= { alarmTributaryMuxA 86 } alarmTributary27TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 27 input." ::= { alarmTributaryMuxA 87 } alarmTributary28TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A has a signal with a wrong coding scheme on Tributary 28 input." ::= { alarmTributaryMuxA 88 } alarmTributary1RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 1 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 91 } alarmTributary2RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 2 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 92 } alarmTributary3RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 3 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 93 } alarmTributary4RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 4 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 94 } alarmTributary5RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 5 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 95 } alarmTributary6RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 6 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 96 } alarmTributary7RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 7 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 97 } alarmTributary8RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 8 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 98 } alarmTributary9RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 9 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 99 } alarmTributary10RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 10 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 100 } alarmTributary11RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 11 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 101 } alarmTributary12RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 12 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 102 } alarmTributary13RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 13 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 103 } alarmTributary14RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 14 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 104 } alarmTributary15RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 15 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 105 } alarmTributary16RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 16 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 106 } alarmTributary17RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 17 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 107 } alarmTributary18RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 18 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 108 } alarmTributary19RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 19 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 109 } alarmTributary20RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 20 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 110 } alarmTributary21RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 21 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 111 } alarmTributary22RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 22 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 112 } alarmTributary23RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 23 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 113 } alarmTributary24RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 24 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 114 } alarmTributary25RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 25 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 115 } alarmTributary26RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 26 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 116 } alarmTributary27RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 27 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 117 } alarmTributary28RxOutputFailedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux A Tributary 28 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxA 118 } -- Mux A OC3STM1 Alarms alarmOC3STM1MuxA OBJECT IDENTIFIER ::= { alarmMuxA 15 } alarmOC3STM1TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX A has AIS on input." ::= { alarmOC3STM1MuxA 1 } alarmOC3STM1TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS-1 MUX A has no signal on input." ::= { alarmOC3STM1MuxA 2 } alarmOC3STM1TxInputDegradedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A has BER less then 10E-6 on input." ::= { alarmOC3STM1MuxA 3 } alarmOC3STM1TxRdiTrib1Mux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A indicates an RDI alarm on input." ::= { alarmOC3STM1MuxA 4 } -- Mux A E3/DS3 Alarms alarmE3DS3MuxA OBJECT IDENTIFIER ::= { alarmMuxA 20 } alarmE3DS31TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has AIS on E3/DS3-1 input." ::= { alarmE3DS3MuxA 1 } alarmDS32TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has AIS on DS3-2 input." ::= { alarmE3DS3MuxA 2 } alarmDS33TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has AIS on DS3-3 input." ::= { alarmE3DS3MuxA 3 } alarmE3DS31TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has no signal on E3/DS3-1 input." ::= { alarmE3DS3MuxA 11 } alarmDS32TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has no signal on DS3-2 input." ::= { alarmE3DS3MuxA 12 } alarmDS33TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has no signal on DS3-3 input." ::= { alarmE3DS3MuxA 13 } alarmE3DS31TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has a signal with a wrong coding scheme on E3/DS3-1 input." ::= { alarmE3DS3MuxA 21 } alarmDS32TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has a signal with a wrong coding scheme on DS3-2 input." ::= { alarmE3DS3MuxA 22 } alarmDS33TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has a signal with a wrong coding scheme on DS3-3 input." ::= { alarmE3DS3MuxA 23 } alarmE3DS31TxInputOOFMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has no E3/DS3 frame data on E3/DS3-1 input." ::= { alarmE3DS3MuxA 31 } alarmDS32TxInputOOFMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has no E3/DS3 frame data on DS3-2 input." ::= { alarmE3DS3MuxA 32 } alarmDS33TxInputOOFMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has no E3/DS3 frame data on DS3-3 input." ::= { alarmE3DS3MuxA 33 } alarmE3DS31RxOutputFailMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has no output signal or the signal level is too low (-3 dB) on E3/DS3-1." ::= { alarmE3DS3MuxA 41 } alarmDS32RxOutputFailMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has no output signal or the signal level is too low (-3 dB) on DS3-2." ::= { alarmE3DS3MuxA 42 } alarmDS33RxOutputFailMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-A has no output signal or the signal level is too low (-3 dB) on DS3-3." ::= { alarmE3DS3MuxA 43 } -- Mux A 100BT Alarms alarm100BTMuxA OBJECT IDENTIFIER ::= { alarmMuxA 26 } alarm100BTPort1LinkTestFailMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the link test procedure for Port 1 of 10/100 Base-T Mux-A has failed. Note that this is a status alarm and will not trigger the minor/major alarms." ::= { alarm100BTMuxA 1 } alarm100BTPort2LinkTestFailMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the link test procedure for Port 2 of 10/100 Base-T Mux-A has failed. Note that this is a status alarm and will not trigger the minor/major alarms." ::= { alarm100BTMuxA 2 } -- Mux A Wayside Alarms alarmMuxA-WS OBJECT IDENTIFIER ::= { alarmMuxA 40 } alarmWayside1TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Wayside 1 has AIS on input." ::= { alarmMuxA-WS 1 } alarmWayside2TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Wayside 2 has AIS on input." ::= { alarmMuxA-WS 2 } alarmWayside3TxInputAISMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Wayside 3 has AIS on input." ::= { alarmMuxA-WS 3 } alarmWayside1TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Wayside 1 has no signal on input." ::= { alarmMuxA-WS 11 } alarmWayside2TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Wayside 2 has no signal on input." ::= { alarmMuxA-WS 12 } alarmWayside3TxInputLOSMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Wayside 3 has no signal on input." ::= { alarmMuxA-WS 13 } alarmWayside1TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Wayside 1 has a signal with a wrong coding scheme on input." ::= { alarmMuxA-WS 21 } alarmWayside2TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Wayside 2 has a signal with a wrong coding scheme on input." ::= { alarmMuxA-WS 22 } alarmWayside3TxInputCodeErrorMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Wayside 3 has a signal with a wrong coding scheme on input." ::= { alarmMuxA-WS 23 } alarmWayside1RxOutputFailMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates Mux A Wayside 1 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmMuxA-WS 31 } alarmWayside2RxOutputFailMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates Mux A Wayside 2 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmMuxA-WS 32 } alarmWayside3RxOutputFailMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates Mux A Wayside 3 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmMuxA-WS 33 } alarmFpgaDownloadMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A FPGA download failed." ::= { alarmMuxA 50 } alarmFpgaSettingsMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A Setting file download failed." ::= { alarmMuxA 51 } alarmUnknownCardMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in MUX A slot is unknown." ::= { alarmMuxA 53 } alarmFwNotUpgradedMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux A currently running firmware is different than firmware for Mux in SPU Primary software bank." ::= { alarmMuxA 54 } alarmReplaceMeMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in MUX A slot shall be replaced." ::= { alarmMuxA 60 } alarmTimingReferenceRadioMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A input from RF indicates an timing reference alarm." ::= { alarmMuxA 61 } alarmTimingReferenceInputMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A input from customer indicates an timing reference alarm." ::= { alarmMuxA 62 } alarmTimingReferenceSpurMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A SPUR input indicates an timing reference alarm." ::= { alarmMuxA 63 } alarmTimingReferencePdhMux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A input from PDH indicates an timing reference alarm." ::= { alarmMuxA 64 } alarmTimingReferenceExtClockInput1Mux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A external clock input 1 indicates an timing reference alarm." ::= { alarmMuxA 65 } alarmTimingReferenceExtClockInput2Mux-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A external clock input 2 indicates an timing reference alarm." ::= { alarmMuxA 66 } -- Mux B Alarms alarmMuxB OBJECT IDENTIFIER ::= { alarm 120 } alarmTxClockInputLossMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that there is no external clock input from customer on Mux B." ::= { alarmMuxB 1 } alarmDemuxSyncLoss-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Rx demux B is in sync loss. This is due to one or more problems, indicated by other sync loss alarms." ::= { alarmMuxB 2 } -- Mux B Tributary Alarms alarmTributaryMuxB OBJECT IDENTIFIER ::= { alarmMuxB 10 } alarmTributary1TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 1 input." ::= { alarmTributaryMuxB 1 } alarmTributary2TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 2 input." ::= { alarmTributaryMuxB 2 } alarmTributary3TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 3 input." ::= { alarmTributaryMuxB 3 } alarmTributary4TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 4 input." ::= { alarmTributaryMuxB 4 } alarmTributary5TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 5 input." ::= { alarmTributaryMuxB 5 } alarmTributary6TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 6 input." ::= { alarmTributaryMuxB 6 } alarmTributary7TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 7 input." ::= { alarmTributaryMuxB 7 } alarmTributary8TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 8 input." ::= { alarmTributaryMuxB 8 } alarmTributary9TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 9 input." ::= { alarmTributaryMuxB 9 } alarmTributary10TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 10 input." ::= { alarmTributaryMuxB 10 } alarmTributary11TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 11 input." ::= { alarmTributaryMuxB 11 } alarmTributary12TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 12 input." ::= { alarmTributaryMuxB 12 } alarmTributary13TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 13 input." ::= { alarmTributaryMuxB 13 } alarmTributary14TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 14 input." ::= { alarmTributaryMuxB 14 } alarmTributary15TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 15 input." ::= { alarmTributaryMuxB 15 } alarmTributary16TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 16 input." ::= { alarmTributaryMuxB 16 } alarmTributary17TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 17 input." ::= { alarmTributaryMuxB 17 } alarmTributary18TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 18 input." ::= { alarmTributaryMuxB 18 } alarmTributary19TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 19 input." ::= { alarmTributaryMuxB 19 } alarmTributary20TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 20 input." ::= { alarmTributaryMuxB 20 } alarmTributary21TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 21 input." ::= { alarmTributaryMuxB 21 } alarmTributary22TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 22 input." ::= { alarmTributaryMuxB 22 } alarmTributary23TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 23 input." ::= { alarmTributaryMuxB 23 } alarmTributary24TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 24 input." ::= { alarmTributaryMuxB 24 } alarmTributary25TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 25 input." ::= { alarmTributaryMuxB 25 } alarmTributary26TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 26 input." ::= { alarmTributaryMuxB 26 } alarmTributary27TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 27 input." ::= { alarmTributaryMuxB 27 } alarmTributary28TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has AIS on Tributary 28 input." ::= { alarmTributaryMuxB 28 } -- reserved for 21E1 ans 28DS1 muxes alarmTributary1TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 1 input." ::= { alarmTributaryMuxB 31 } alarmTributary2TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 2 input." ::= { alarmTributaryMuxB 32 } alarmTributary3TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 3 input." ::= { alarmTributaryMuxB 33 } alarmTributary4TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 4 input." ::= { alarmTributaryMuxB 34 } alarmTributary5TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 5 input." ::= { alarmTributaryMuxB 35 } alarmTributary6TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 6 input." ::= { alarmTributaryMuxB 36 } alarmTributary7TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 7 input." ::= { alarmTributaryMuxB 37 } alarmTributary8TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 8 input." ::= { alarmTributaryMuxB 38 } alarmTributary9TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 9 input." ::= { alarmTributaryMuxB 39 } alarmTributary10TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 10 input." ::= { alarmTributaryMuxB 40 } alarmTributary11TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 11 input." ::= { alarmTributaryMuxB 41 } alarmTributary12TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 12 input." ::= { alarmTributaryMuxB 42 } alarmTributary13TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 13 input." ::= { alarmTributaryMuxB 43 } alarmTributary14TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 14 input." ::= { alarmTributaryMuxB 44 } alarmTributary15TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 15 input." ::= { alarmTributaryMuxB 45 } alarmTributary16TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 16 input." ::= { alarmTributaryMuxB 46 } alarmTributary17TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 17 input." ::= { alarmTributaryMuxB 47 } alarmTributary18TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 18 input." ::= { alarmTributaryMuxB 48 } alarmTributary19TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 19 input." ::= { alarmTributaryMuxB 49 } alarmTributary20TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 20 input." ::= { alarmTributaryMuxB 50 } alarmTributary21TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 21 input." ::= { alarmTributaryMuxB 51 } alarmTributary22TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 22 input." ::= { alarmTributaryMuxB 52 } alarmTributary23TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 23 input." ::= { alarmTributaryMuxB 53 } alarmTributary24TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 24 input." ::= { alarmTributaryMuxB 54 } alarmTributary25TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 25 input." ::= { alarmTributaryMuxB 55 } alarmTributary26TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 26 input." ::= { alarmTributaryMuxB 56 } alarmTributary27TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 27 input." ::= { alarmTributaryMuxB 57 } alarmTributary28TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has no signal on Tributary 28 input." ::= { alarmTributaryMuxB 58 } alarmTributary1TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 1 input." ::= { alarmTributaryMuxB 61 } alarmTributary2TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 2 input." ::= { alarmTributaryMuxB 62 } alarmTributary3TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 3 input." ::= { alarmTributaryMuxB 63 } alarmTributary4TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 4 input." ::= { alarmTributaryMuxB 64 } alarmTributary5TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 5 input." ::= { alarmTributaryMuxB 65 } alarmTributary6TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 6 input." ::= { alarmTributaryMuxB 66 } alarmTributary7TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 7 input." ::= { alarmTributaryMuxB 67 } alarmTributary8TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 8 input." ::= { alarmTributaryMuxB 68 } alarmTributary9TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 9 input.." ::= { alarmTributaryMuxB 69 } alarmTributary10TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 10 input." ::= { alarmTributaryMuxB 70 } alarmTributary11TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 11 input." ::= { alarmTributaryMuxB 71 } alarmTributary12TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 12 input." ::= { alarmTributaryMuxB 72 } alarmTributary13TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 13 input." ::= { alarmTributaryMuxB 73 } alarmTributary14TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 14 input." ::= { alarmTributaryMuxB 74 } alarmTributary15TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 15 input." ::= { alarmTributaryMuxB 75 } alarmTributary16TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 16 input." ::= { alarmTributaryMuxB 76 } alarmTributary17TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 17 input." ::= { alarmTributaryMuxB 77 } alarmTributary18TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 18 input." ::= { alarmTributaryMuxB 78 } alarmTributary19TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 19 input." ::= { alarmTributaryMuxB 79 } alarmTributary20TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 20 input." ::= { alarmTributaryMuxB 80 } alarmTributary21TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 21 input." ::= { alarmTributaryMuxB 81 } alarmTributary22TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 22 input." ::= { alarmTributaryMuxB 82 } alarmTributary23TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 23 input." ::= { alarmTributaryMuxB 83 } alarmTributary24TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 24 input." ::= { alarmTributaryMuxB 84 } alarmTributary25TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 25 input." ::= { alarmTributaryMuxB 85 } alarmTributary26TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 26 input." ::= { alarmTributaryMuxB 86 } alarmTributary27TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 27 input." ::= { alarmTributaryMuxB 87 } alarmTributary28TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B has a signal with a wrong coding scheme on Tributary 28 input." ::= { alarmTributaryMuxB 88 } alarmTributary1RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 1 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 91 } alarmTributary2RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 2 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 92 } alarmTributary3RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 3 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 93 } alarmTributary4RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 4 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 94 } alarmTributary5RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 5 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 95 } alarmTributary6RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 6 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 96 } alarmTributary7RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 7 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 97 } alarmTributary8RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 8 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 98 } alarmTributary9RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 9 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 99 } alarmTributary10RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 10 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 100 } alarmTributary11RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 11 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 101 } alarmTributary12RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 12 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 102 } alarmTributary13RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 13 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 103 } alarmTributary14RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 14 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 104 } alarmTributary15RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 15 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 105 } alarmTributary16RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 16 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 106 } alarmTributary17RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 17 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 107 } alarmTributary18RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 18 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 108 } alarmTributary19RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 19 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 109 } alarmTributary20RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 20 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 110 } alarmTributary21RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 21 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 111 } alarmTributary22RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 22 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 112 } alarmTributary23RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 23 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 113 } alarmTributary24RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 24 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 114 } alarmTributary25RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 25 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 115 } alarmTributary26RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 26 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 116 } alarmTributary27RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 27 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 117 } alarmTributary28RxOutputFailedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates a Mux B Tributary 28 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributaryMuxB 118 } -- Mux B OC3STM1 Alarms alarmOC3STM1MuxB OBJECT IDENTIFIER ::= { alarmMuxB 15 } alarmOC3STM1TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STM-1 MUX B has AIS on input." ::= { alarmOC3STM1MuxB 1 } alarmOC3STM1TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS-1 MUX B has no signal on input." ::= { alarmOC3STM1MuxB 2 } alarmOC3STM1TxInputDegradedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX B has BER less then 10E-6 on input." ::= { alarmOC3STM1MuxB 3 } alarmOC3STM1TxRdiTrib1Mux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX B indicates an RDI alarm on input." ::= { alarmOC3STM1MuxB 4 } -- Mux B E3/DS3 Alarms alarmE3DS3MuxB OBJECT IDENTIFIER ::= { alarmMuxB 20 } alarmE3DS31TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has AIS on E3/DS3-1 input." ::= { alarmE3DS3MuxB 1 } alarmDS32TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has AIS on DS3-2 input." ::= { alarmE3DS3MuxB 2 } alarmDS33TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has AIS on DS3-3 input." ::= { alarmE3DS3MuxB 3 } alarmE3DS31TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has no signal on E3/DS3-1 input." ::= { alarmE3DS3MuxB 11 } alarmDS32TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has no signal on DS3-2 input." ::= { alarmE3DS3MuxB 12 } alarmDS33TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has no signal on DS3-3 input." ::= { alarmE3DS3MuxB 13 } alarmE3DS31TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has a signal with a wrong coding scheme on E3/DS3-1 input." ::= { alarmE3DS3MuxB 21 } alarmDS32TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has a signal with a wrong coding scheme on DS3-2 input." ::= { alarmE3DS3MuxB 22 } alarmDS33TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has a signal with a wrong coding scheme on DS3-3 input." ::= { alarmE3DS3MuxB 23 } alarmE3DS31TxInputOOFMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has no E3/DS3 frame data on E3/DS3-1 input." ::= { alarmE3DS3MuxB 31 } alarmDS32TxInputOOFMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has no E3/DS3 frame data on DS3-2 input." ::= { alarmE3DS3MuxB 32 } alarmDS33TxInputOOFMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has no E3/DS3 frame data on DS3-3 input." ::= { alarmE3DS3MuxB 33 } alarmE3DS31RxOutputFailMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has no output signal or the signal level is too low (-3 dB) on E3/DS3-1." ::= { alarmE3DS3MuxB 41 } alarmDS32RxOutputFailMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has no output signal or the signal level is too low (-3 dB) on DS3-2." ::= { alarmE3DS3MuxB 42 } alarmDS33RxOutputFailMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux-B has no output signal or the signal level is too low (-3 dB) on DS3-3." ::= { alarmE3DS3MuxB 43 } -- Mux B 100BT Alarms alarm100BTMuxB OBJECT IDENTIFIER ::= { alarmMuxB 26 } alarm100BTPort1LinkTestFailMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the link test procedure for Port 1 of 10/100 Base-T Mux-B has failed. Note that this is a status alarm and will not trigger the minor/major alarms." ::= { alarm100BTMuxB 1 } alarm100BTPort2LinkTestFailMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the link test procedure for Port 2 of 10/100 Base-T Mux-B has failed. Note that this is a status alarm and will not trigger the minor/major alarms." ::= { alarm100BTMuxB 2 } -- Mux B Wayside Alarms alarmMuxB-WS OBJECT IDENTIFIER ::= { alarmMuxB 40 } alarmWayside1TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Wayside 1 has AIS on input." ::= { alarmMuxB-WS 1 } alarmWayside2TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Wayside 2 has AIS on input." ::= { alarmMuxB-WS 2 } alarmWayside3TxInputAISMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Wayside 3 has AIS on input." ::= { alarmMuxB-WS 3 } alarmWayside1TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Wayside 1 has no signal on input." ::= { alarmMuxB-WS 11 } alarmWayside2TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Wayside 2 has no signal on input." ::= { alarmMuxB-WS 12 } alarmWayside3TxInputLOSMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Wayside 3 has no signal on input." ::= { alarmMuxB-WS 13 } alarmWayside1TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Wayside 1 has a signal with a wrong coding scheme on input." ::= { alarmMuxB-WS 21 } alarmWayside2TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Wayside 2 has a signal with a wrong coding scheme on input." ::= { alarmMuxB-WS 22 } alarmWayside3TxInputCodeErrorMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Wayside 3 has a signal with a wrong coding scheme on input." ::= { alarmMuxB-WS 23 } alarmWayside1RxOutputFailMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates Mux B Wayside 1 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmMuxB-WS 31 } alarmWayside2RxOutputFailMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates Mux B Wayside 2 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmMuxB-WS 32 } alarmWayside3RxOutputFailMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates Mux B Wayside 3 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmMuxB-WS 33 } alarmFpgaDownloadMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B FPGA download failed." ::= { alarmMuxB 50 } alarmFpgaSettingsMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B Setting file download failed." ::= { alarmMuxB 51 } alarmUnknownCardMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in Mux B slot is unknown." ::= { alarmMuxB 53 } alarmFwNotUpgradedMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Mux B currently running firmware is different than firmware for Mux in SPU Primary software bank." ::= { alarmMuxB 54 } alarmReplaceMeMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in Mux B slot shall be replaced." ::= { alarmMuxB 60 } alarmTimingReferenceRadioMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A input from RF indicates an timing reference alarm." ::= { alarmMuxB 61 } alarmTimingReferenceInputMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A input from customer indicates an timing reference alarm." ::= { alarmMuxB 62 } alarmTimingReferenceSpurMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX B SPUR input indicates an timing reference alarm." ::= { alarmMuxB 63 } alarmTimingReferencePdhMux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX A input from PDH indicates an timing reference alarm." ::= { alarmMuxB 64 } alarmTimingReferenceExtClockInput1Mux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX B external clock input 1 indicates an timing reference alarm." ::= { alarmMuxB 65 } alarmTimingReferenceExtClockInput2Mux-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 MUX B external clock input 2 indicates an timing reference alarm." ::= { alarmMuxB 66 } -- RFU A Alarms alarmRfuA OBJECT IDENTIFIER ::= { alarm 130 } alarmRxEquipmentRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates RFU A equipment failure in receiver direction." ::= { alarmRfuA 1 } alarmTxEquipmentRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates RFU A equipment failure in transmitter direction." ::= { alarmRfuA 5 } alarmEepromRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A EEPROMs is not functional." ::= { alarmRfuA 10 } alarmSynthesizerRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A synthesizers is not programmed or not functional." ::= { alarmRfuA 15 } alarmPALowRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A PA output is low (more than 3 dB below set value)." ::= { alarmRfuA 20 } alarmPAOuputOutOfRangeRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A PA output power is out of range (Tx loop does not converge)." ::= { alarmRfuA 21 } alarmCalibrationTblMismatchRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that at least one of the RFU A modules (IF/RPC, Tx, and Rx) has wrong version of the calibration table." ::= { alarmRfuA 25 } alarmTxSilentFailureRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A has confirmed transmitter silent failure." ::= { alarmRfuA 30 } alarmRfuMutingForTelemetryFailure-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A has muted its PA because the RFU has not received a telemetry frame from the SPU for more than 10 seconds." ::= { alarmRfuA 31 } alarmSwDownloadErrorRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that software download to RFU A failed." ::= { alarmRfuA 50 } alarmSettingsRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A Setting file download failed." ::= { alarmRfuA 51 } alarmSwNotUpgradedRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A currently running software is different than software for RFU in SPU Primary software bank." ::= { alarmRfuA 54 } alarmFailRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A has failed." ::= { alarmRfuA 58 } alarmReplaceMeRfu-A OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU A shall be replaced." ::= { alarmRfuA 60 } -- RFU B Alarms alarmRfuB OBJECT IDENTIFIER ::= { alarm 140 } alarmRxEquipmentRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates RFU B equipment failure in receiver direction." ::= { alarmRfuB 1 } alarmTxEquipmentRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates RFU B equipment failure in transmitter direction." ::= { alarmRfuB 5 } alarmEepromRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B EEPROMs is not functional." ::= { alarmRfuB 10 } alarmSynthesizerRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B synthesizers is not programmed or not functional." ::= { alarmRfuB 15 } alarmPALowRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B PA output is low (more than 3 dB below set value)." ::= { alarmRfuB 20 } alarmPAOuputOutOfRangeRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B PA output power is out of range (Tx loop does not converge)." ::= { alarmRfuB 21 } alarmCalibrationTblMismatchRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that at least one of the RFU B modules (IF/RPC, Tx, and Rx) has wrong version of the calibration table." ::= { alarmRfuB 25 } alarmTxSilentFailureRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B has confirmed transmitter silent failure." ::= { alarmRfuB 30 } alarmRfuMutingForTelemetryFailure-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B has muted its PA because the RFU has not received a telemetry frame from the SPU for more than 10 seconds." ::= { alarmRfuB 31 } alarmSwDownloadErrorRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that software download to RFU B failed." ::= { alarmRfuB 50 } alarmSettingsRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B Setting file download failed." ::= { alarmRfuB 51 } alarmSwNotUpgradedRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B currently running software is different than software for RFU in SPU Primary software bank." ::= { alarmRfuB 54 } alarmFailRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B has failed." ::= { alarmRfuB 58 } alarmReplaceMeRfu-B OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that RFU B shall be replaced." ::= { alarmRfuB 60 } -- Optional Card 1 Alarms alarmOpt1 OBJECT IDENTIFIER ::= { alarm 150 } -- Orderwire Card 1 Alarms alarmOrderwireOpt1 OBJECT IDENTIFIER ::= { alarmOpt1 5 } -- none -- Relay/Alarm Card 1 Alarms alarmRAOpt1 OBJECT IDENTIFIER ::= { alarmOpt1 10 } -- none -- 10/100 Base-T over 64 kb/s Card 1 Alarms alarm10BaseTOpt1 OBJECT IDENTIFIER ::= { alarmOpt1 15 } alarmEthernetOver64kPort1LinkTestFailOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates link test procedure for Port 1 of Ethernet over 64kbits/s Optional Card 1 is failed." ::= { alarm10BaseTOpt1 1 } alarmEthernetOver64kPort2LinkTestFailOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates link test procedure for Port 2 of Ethernet over 64kbits/s Optional Card 1 is failed." ::= { alarm10BaseTOpt1 2 } -- Generic 64 kb/s (G.703 and V.11) Card 1 Alarms alarmG703V11Opt1 OBJECT IDENTIFIER ::= { alarmOpt1 20 } alarmAISInsertG703V11Opt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that AIS inserted on Rx stream of Card 1 sent forward to the user equipment, because data has not been received for this stream." ::= { alarmG703V11Opt1 1 } alarmTxInputLossG703V11Opt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Card 1 stops receiving data for Tx stream from the user equipment." ::= { alarmG703V11Opt1 2 } alarmFpgaDownloadOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Optional Card 1 FPGA download failed." ::= { alarmOpt1 50 } alarmFpgaSettingsOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Optional Card 1 Setting file download failed." ::= { alarmOpt1 51 } alarmUnknownCardOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in Optional Card 1 slot is unknown." ::= { alarmOpt1 53 } alarmFwNotUpgradedOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Optional Card 1 currently running firmware is different than firmware for this type of Optional Card in SPU Primary software bank." ::= { alarmOpt1 54 } alarmNotSupportedInSimplexOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in Optional Card 1 slot is not supported in Simplex mode." ::= { alarmOpt1 56 } alarmCeTunnelCommFailOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates bidirectional Ethernet/IP communication failure over the 64Kb/s link between the local NE 10-100BT/64K Optional Card 1 and its remote destination NE mate. The destination NE optional card may be absent/disabled or the destination NE is unreachable." ::= { alarmOpt1 57 } alarmCeTunnelConflictOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Optional Card 1, configured for a tunnel communication, receives data from two different NE Addresses." ::= { alarmOpt1 58 } alarmReplaceMeOpt-1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in Optional Card 1 slot shall be replaced." ::= { alarmOpt1 60 } -- Optional Card 2 Alarms alarmOpt2 OBJECT IDENTIFIER ::= { alarm 160 } -- Orderwire Card 2 Alarms alarmOrderwireOpt2 OBJECT IDENTIFIER ::= { alarmOpt2 5 } -- none -- Relay/Alarm Card 2 Alarms alarmRAOpt2 OBJECT IDENTIFIER ::= { alarmOpt2 10 } -- none -- 10/100 Base-T over 64 kb/s Card 2 Alarms alarm10BaseTOpt2 OBJECT IDENTIFIER ::= { alarmOpt2 15 } alarmEthernetOver64kPort1LinkTestFailOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates link test procedure for Port 1 of Ethernet over 64kbits/s Optional Card 2 is failed." ::= { alarm10BaseTOpt2 1 } alarmEthernetOver64kPort2LinkTestFailOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates link test procedure for Port 2 of Ethernet over 64kbits/s Optional Card 2 is failed." ::= { alarm10BaseTOpt2 2 } -- Generic 64 kb/s (G.703 and V.11) Card 2 Alarms alarmG703V11Opt2 OBJECT IDENTIFIER ::= { alarmOpt2 20 } alarmAISInsertG703V11Opt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that AIS inserted on Rx stream of Card 2 sent forward to the user equipment, because data has not been received for this stream." ::= { alarmG703V11Opt2 1 } alarmTxInputLossG703V11Opt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Card 2 stops receiving data for Tx stream from the user equipment." ::= { alarmG703V11Opt2 2 } alarmFpgaDownloadOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Optional Card 2 FPGA download failed." ::= { alarmOpt2 50 } alarmFpgaSettingsOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Optional Card 2 Setting file download failed." ::= { alarmOpt2 51 } alarmUnknownCardOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in Optional Card 2 slot is unknown." ::= { alarmOpt2 53 } alarmFwNotUpgradedOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Optional Card 2 currently running firmware is different than firmware for this type of Optional Card in SPU Primary software bank." ::= { alarmOpt2 54 } alarmNotSupportedInSimplexOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in Optional Card 2 slot is not supported in Simplex mode." ::= { alarmOpt2 56 } alarmCeTunnelCommFailOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates bidirectional Ethernet/IP communication failure over the 64Kb/s link between the local NE 10-100BT/64K Optional Card 2 and its remote destination NE mate. The destination NE optional card may be absent/disabled or the destination NE is unreachable." ::= { alarmOpt2 57 } alarmCeTunnelConflictOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that Optional Card 2, configured for a tunnel communication, receives data from two different NE Addresses." ::= { alarmOpt2 58 } alarmReplaceMeOpt-2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in Optional Card 2 slot shall be replaced." ::= { alarmOpt2 60 } -- SDM Alarms alarmSdm OBJECT IDENTIFIER ::= { alarm 165 } -- Mux B Tributary Alarms alarmTributarySdm OBJECT IDENTIFIER ::= { alarmSdm 10 } alarmTributary1TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 1 input." ::= { alarmTributarySdm 1 } alarmTributary2TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 2 input." ::= { alarmTributarySdm 2 } alarmTributary3TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 3 input." ::= { alarmTributarySdm 3 } alarmTributary4TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 4 input." ::= { alarmTributarySdm 4 } alarmTributary5TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 5 input." ::= { alarmTributarySdm 5 } alarmTributary6TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 6 input." ::= { alarmTributarySdm 6 } alarmTributary7TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 7 input." ::= { alarmTributarySdm 7 } alarmTributary8TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 8 input." ::= { alarmTributarySdm 8 } alarmTributary9TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 9 input." ::= { alarmTributarySdm 9 } alarmTributary10TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 10 input." ::= { alarmTributarySdm 10 } alarmTributary11TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 11 input." ::= { alarmTributarySdm 11 } alarmTributary12TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 12 input." ::= { alarmTributarySdm 12 } alarmTributary13TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 13 input." ::= { alarmTributarySdm 13 } alarmTributary14TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 14 input." ::= { alarmTributarySdm 14 } alarmTributary15TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 15 input." ::= { alarmTributarySdm 15 } alarmTributary16TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 16 input." ::= { alarmTributarySdm 16 } alarmTributary17TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 17 input." ::= { alarmTributarySdm 17 } alarmTributary18TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 18 input." ::= { alarmTributarySdm 18 } alarmTributary19TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 19 input." ::= { alarmTributarySdm 19 } alarmTributary20TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 20 input." ::= { alarmTributarySdm 20 } alarmTributary21TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 21 input." ::= { alarmTributarySdm 21 } alarmTributary22TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 22 input." ::= { alarmTributarySdm 22 } alarmTributary23TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 23 input." ::= { alarmTributarySdm 23 } alarmTributary24TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 24 input." ::= { alarmTributarySdm 24 } alarmTributary25TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 25 input." ::= { alarmTributarySdm 25 } alarmTributary26TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 26 input." ::= { alarmTributarySdm 26 } alarmTributary27TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 27 input." ::= { alarmTributarySdm 27 } alarmTributary28TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has AIS on Tributary 28 input." ::= { alarmTributarySdm 28 } alarmTributary1TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 1 input." ::= { alarmTributarySdm 31 } alarmTributary2TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 2 input." ::= { alarmTributarySdm 32 } alarmTributary3TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 3 input." ::= { alarmTributarySdm 33 } alarmTributary4TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 4 input." ::= { alarmTributarySdm 34 } alarmTributary5TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 5 input." ::= { alarmTributarySdm 35 } alarmTributary6TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 6 input." ::= { alarmTributarySdm 36 } alarmTributary7TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 7 input." ::= { alarmTributarySdm 37 } alarmTributary8TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 8 input." ::= { alarmTributarySdm 38 } alarmTributary9TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 9 input." ::= { alarmTributarySdm 39 } alarmTributary10TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 10 input." ::= { alarmTributarySdm 40 } alarmTributary11TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 11 input." ::= { alarmTributarySdm 41 } alarmTributary12TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 12 input." ::= { alarmTributarySdm 42 } alarmTributary13TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 13 input." ::= { alarmTributarySdm 43 } alarmTributary14TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 14 input." ::= { alarmTributarySdm 44 } alarmTributary15TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 15 input." ::= { alarmTributarySdm 45 } alarmTributary16TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 16 input." ::= { alarmTributarySdm 46 } alarmTributary17TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 17 input." ::= { alarmTributarySdm 47 } alarmTributary18TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 18 input." ::= { alarmTributarySdm 48 } alarmTributary19TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 19 input." ::= { alarmTributarySdm 49 } alarmTributary20TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 20 input." ::= { alarmTributarySdm 50 } alarmTributary21TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 21 input." ::= { alarmTributarySdm 51 } alarmTributary22TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 22 input." ::= { alarmTributarySdm 52 } alarmTributary23TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 23 input." ::= { alarmTributarySdm 53 } alarmTributary24TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 24 input." ::= { alarmTributarySdm 54 } alarmTributary25TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 25 input." ::= { alarmTributarySdm 55 } alarmTributary26TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 26 input." ::= { alarmTributarySdm 56 } alarmTributary27TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 27 input." ::= { alarmTributarySdm 57 } alarmTributary28TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has no signal on Tributary 28 input." ::= { alarmTributarySdm 58 } alarmTributary1TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 1 input." ::= { alarmTributarySdm 61 } alarmTributary2TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 2 input." ::= { alarmTributarySdm 62 } alarmTributary3TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 3 input." ::= { alarmTributarySdm 63 } alarmTributary4TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 4 input." ::= { alarmTributarySdm 64 } alarmTributary5TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 5 input." ::= { alarmTributarySdm 65 } alarmTributary6TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 6 input." ::= { alarmTributarySdm 66 } alarmTributary7TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 7 input." ::= { alarmTributarySdm 67 } alarmTributary8TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 8 input." ::= { alarmTributarySdm 68 } alarmTributary9TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 9 input." ::= { alarmTributarySdm 69 } alarmTributary10TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 10 input." ::= { alarmTributarySdm 70 } alarmTributary11TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 11 input." ::= { alarmTributarySdm 71 } alarmTributary12TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 12 input." ::= { alarmTributarySdm 72 } alarmTributary13TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 13 input." ::= { alarmTributarySdm 73 } alarmTributary14TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 14 input." ::= { alarmTributarySdm 74 } alarmTributary15TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 15 input." ::= { alarmTributarySdm 75 } alarmTributary16TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 16 input." ::= { alarmTributarySdm 76 } alarmTributary17TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 17 input." ::= { alarmTributarySdm 77 } alarmTributary18TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 18 input." ::= { alarmTributarySdm 78 } alarmTributary19TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 19 input." ::= { alarmTributarySdm 79 } alarmTributary20TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 20 input." ::= { alarmTributarySdm 80 } alarmTributary21TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 21 input." ::= { alarmTributarySdm 81 } alarmTributary22TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 22 input." ::= { alarmTributarySdm 82 } alarmTributary23TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 23 input." ::= { alarmTributarySdm 83 } alarmTributary24TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 24 input." ::= { alarmTributarySdm 84 } alarmTributary25TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 25 input." ::= { alarmTributarySdm 85 } alarmTributary26TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 26 input." ::= { alarmTributarySdm 86 } alarmTributary27TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 27 input." ::= { alarmTributarySdm 87 } alarmTributary28TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a signal with a wrong coding scheme on Tributary 28 input." ::= { alarmTributarySdm 88 } alarmTributary1RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 1 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 91 } alarmTributary2RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 2 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 92 } alarmTributary3RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 3 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 93 } alarmTributary4RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 4 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 94 } alarmTributary5RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 5 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 95 } alarmTributary6RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 6 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 96 } alarmTributary7RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 7 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 97 } alarmTributary8RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 8 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 98 } alarmTributary9RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 9 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 99 } alarmTributary10RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 10 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 100 } alarmTributary11RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 11 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 101 } alarmTributary12RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 12 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 102 } alarmTributary13RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 13 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 103 } alarmTributary14RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 14 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 104 } alarmTributary15RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 15 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 105 } alarmTributary16RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 16 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 106 } alarmTributary17RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 17 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 107 } alarmTributary18RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 18 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 108 } alarmTributary19RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 19 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 109 } alarmTributary20RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 20 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 110 } alarmTributary21RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 21 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 111 } alarmTributary22RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 22 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 112 } alarmTributary23RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 23 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 113 } alarmTributary24RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 24 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 114 } alarmTributary25RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 25 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 115 } alarmTributary26RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 26 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 116 } alarmTributary27RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 27 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 117 } alarmTributary28RxOutputFailed OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the SDM has a Tributary 28 Output Fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmTributarySdm 118 } -- Sdm E3/DS3 Alarms alarmE3DS3Sdm OBJECT IDENTIFIER ::= { alarmSdm 20 } alarmE3DS31TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has AIS on E3/DS3-1 input." ::= { alarmE3DS3Sdm 1 } alarmDS32TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has AIS on DS3-2 input." ::= { alarmE3DS3Sdm 2 } alarmDS33TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has AIS on DS3-3 input." ::= { alarmE3DS3Sdm 3 } alarmE3DS31TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has no signal on E3/DS3-1 input." ::= { alarmE3DS3Sdm 11 } alarmDS32TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has no signal on DS3-2 input." ::= { alarmE3DS3Sdm 12 } alarmDS33TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has no signal on DS3-3 input." ::= { alarmE3DS3Sdm 13 } alarmE3DS31TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has a signal with a wrong coding scheme on E3/DS3-1 input." ::= { alarmE3DS3Sdm 21 } alarmDS32TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has a signal with a wrong coding scheme on DS3-2 input." ::= { alarmE3DS3Sdm 22 } alarmDS33TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has a signal with a wrong coding scheme on DS3-3 input." ::= { alarmE3DS3Sdm 23 } alarmE3DS31TxInputOOF OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has no E3/DS3 frame data on E3/DS3-1 input." ::= { alarmE3DS3Sdm 31 } alarmDS32TxInputOOF OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has no DS3 frame data on DS3-2 input." ::= { alarmE3DS3Sdm 32 } alarmDS33TxInputOOF OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has no DS3 frame data on DS3-3 input." ::= { alarmE3DS3Sdm 33 } alarmE3DS31RxOutputFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has no output signal or the signal level is too low (-3 dB) on E3/DS3-1." ::= { alarmE3DS3Sdm 41 } alarmDS32RxOutputFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has no output signal or the signal level is too low (-3 dB) on DS3-2." ::= { alarmE3DS3Sdm 42 } alarmDS33RxOutputFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM has no output signal or the signal level is too low (-3 dB) on DS3-3." ::= { alarmE3DS3Sdm 43 } -- Sdm 10/100 Base-T Alarms alarm100BTSdm OBJECT IDENTIFIER ::= { alarmSdm 26 } alarm100BTPort1LinkTestFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the link test procedure for Port 1 of 10/100 Base-T SDM has failed. Note that this is a status alarm and will not trigger the minor/major alarms." ::= { alarm100BTSdm 1 } alarm100BTPort2LinkTestFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates the link test procedure for Port 2 of 10/100 Base-T SDM has failed. Note that this is a status alarm and will not trigger the minor/major alarms." ::= { alarm100BTSdm 2 } -- Sdm Wayside Alarms alarmSdm-WS OBJECT IDENTIFIER ::= { alarmSdm 40 } alarmWayside1TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 1 has AIS on input." ::= { alarmSdm-WS 1 } alarmWayside2TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 2 has AIS on input." ::= { alarmSdm-WS 2 } alarmWayside3TxInputAIS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 3 has AIS on input." ::= { alarmSdm-WS 3 } alarmWayside1TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 1 has no signal on input." ::= { alarmSdm-WS 11 } alarmWayside2TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 2 has no signal on input." ::= { alarmSdm-WS 12 } alarmWayside3TxInputLOS OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 3 has no signal on input." ::= { alarmSdm-WS 13 } alarmWayside1TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 1 has a signal with a wrong coding scheme on input." ::= { alarmSdm-WS 21 } alarmWayside2TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 2 has a signal with a wrong coding scheme on input." ::= { alarmSdm-WS 22 } alarmWayside3TxInputCodeError OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 3 has a signal with a wrong coding scheme on input." ::= { alarmSdm-WS 23 } alarmWayside1RxOutputFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 1 has an output fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmSdm-WS 31 } alarmWayside2RxOutputFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 2 has an output fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmSdm-WS 32 } alarmWayside3RxOutputFail OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that SDM Wayside 3 has an output fail alarm, meaning that there is no output signal or the signal level is too low (-3 dB)." ::= { alarmSdm-WS 33 } alarmUnknownCardSdm OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that card in SDM slot is unknown." ::= { alarmSdm 53 } alarmTimingReferencePdh OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 SDM input from PDH indicates a timing reference alarm." ::= { alarmSdm 61 } alarmTimingReferenceExtClockInput1 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 SDM external clock input 1 indicates a timing reference alarm." ::= { alarmSdm 62 } alarmTimingReferenceExtClockInput2 OBJECT-TYPE SYNTAX INTEGER { no-alarm (0), alarm (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This alarm indicates that OC-3/STS3 SDM external clock input 2 indicates a timing reference alarm." ::= { alarmSdm 63 } -- -- Trap section -- truepoint5000alarmSummary TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMajor, alarmMinor } DESCRIPTION "This Notification is issued every time the value of any of MIB objects in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSummary ($S): $>0" --#SEVERITY MAJOR --#CATEGORY "LOGONLY" REFERENCE " " ::= 990001 truepoint5000alarmMajor TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMajor } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMajor ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990002 truepoint5000alarmMinor TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMinor } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMinor ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990003 truepoint5000alarmNoEthernetMacAddress TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmNoEthernetMacAddress } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmNoEthernetMacAddress ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990004 truepoint5000alarmDhcpClientFail TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDhcpClientFail } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDhcpClientFail ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990005 truepoint5000alarmCableModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmCableModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmCableModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990006 truepoint5000alarmCableModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmCableModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmCableModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990007 truepoint5000alarmReboot TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmReboot } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmReboot ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990008 truepoint5000alarmMmcFileSystem TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMmcFileSystem } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMmcFileSystem ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990009 truepoint5000alarmAtpcHighPower TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAtpcHighPower } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAtpcHighPower ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990010 truepoint5000alarmTpcTimeLimit TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTpcTimeLimit } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTpcTimeLimit ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990011 truepoint5000alarmConfigFile TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmConfigFile } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmConfigFile ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990012 truepoint5000alarmLoadCorrupted TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmLoadCorrupted } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmLoadCorrupted ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990013 truepoint5000alarmAtpcHighPowerTx-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAtpcHighPowerTx-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAtpcHighPowerTx-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990014 truepoint5000alarmTpcTimeLimit-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTpcTimeLimit-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTpcTimeLimit-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990015 truepoint5000alarmAtpcHighPowerTx-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAtpcHighPowerTx-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAtpcHighPowerTx-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990016 truepoint5000alarmTpcTimeLimit-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTpcTimeLimit-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTpcTimeLimit-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990017 truepoint5000alarmSpiCommModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSpiCommModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSpiCommModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990018 truepoint5000alarmSpiCommModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSpiCommModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSpiCommModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990019 truepoint5000alarmSpiCommMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSpiCommMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSpiCommMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990020 truepoint5000alarmSpiCommMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSpiCommMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSpiCommMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990021 truepoint5000alarmSpiCommOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSpiCommOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSpiCommOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990022 truepoint5000alarmSpiCommOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSpiCommOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSpiCommOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990023 truepoint5000alarmRfuComm-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRfuComm-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRfuComm-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990024 truepoint5000alarmRfuComm-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRfuComm-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRfuComm-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990025 truepoint5000alarmRfLinkServiceChannelCommFail TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRfLinkServiceChannelCommFail } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRfLinkServiceChannelCommFail ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990026 truepoint5000alarmMismatchMux TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMismatchMux } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMismatchMux ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990027 truepoint5000alarmMismatchSdm TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMismatchSdm } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMismatchSdm ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990028 truepoint5000alarmMismatchModem TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMismatchModem } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMismatchModem ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990029 truepoint5000alarmMismatchRfu TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMismatchRfu } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMismatchRfu ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990030 truepoint5000alarmBER TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmBER } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmBER ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990031 truepoint5000alarmBER-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmBER-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmBER-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990032 truepoint5000alarmBER-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmBER-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmBER-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990033 truepoint5000alarmSignalDegradedModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSignalDegradedModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSignalDegradedModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990034 truepoint5000alarmSignalDegradedModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSignalDegradedModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSignalDegradedModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990035 truepoint5000alarmRslLowRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRslLowRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRslLowRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990036 truepoint5000alarmRslLowRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRslLowRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRslLowRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990037 truepoint5000alarmAlignment TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAlignment } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAlignment ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990038 truepoint5000alarmRemoteAnySyncLoss TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRemoteAnySyncLoss } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRemoteAnySyncLoss ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990039 truepoint5000alarmPathDemuxSyncLoss-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmPathDemuxSyncLoss-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmPathDemuxSyncLoss-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990040 truepoint5000alarmPathDemuxSyncLoss-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmPathDemuxSyncLoss-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmPathDemuxSyncLoss-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990041 -- *** Removed: truepoint5000alarmPathDemuxWaysideSyncLoss-A 990042 -- *** Removed: truepoint5000alarmPathDemuxWaysideSyncLoss-B 990043 truepoint5000alarmLockTx-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmLockTx-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmLockTx-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990044 truepoint5000alarmLockTx-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmLockTx-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmLockTx-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990045 truepoint5000alarmLockRxRfuDecoder-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmLockRxRfuDecoder-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmLockRxRfuDecoder-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990046 truepoint5000alarmLockRxRfuDecoder-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmLockRxRfuDecoder-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmLockRxRfuDecoder-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990047 truepoint5000alarmLockRxDadeDemux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmLockRxDadeDemux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmLockRxDadeDemux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990048 truepoint5000alarmLockRxDadeDemux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmLockRxDadeDemux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmLockRxDadeDemux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990049 truepoint5000alarmModemIFLoopback TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmModemIFLoopback } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmModemIFLoopback ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990050 truepoint5000alarmMuxHighLevelLoopback TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMuxHighLevelLoopback } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMuxHighLevelLoopback ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990051 truepoint5000alarmTributaryLocalInputLoopback1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990052 truepoint5000alarmTributaryLocalInputLoopback2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990053 truepoint5000alarmTributaryLocalInputLoopback3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990054 truepoint5000alarmTributaryLocalInputLoopback4 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback4 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback4 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990055 truepoint5000alarmTributaryLocalInputLoopback5 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback5 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback5 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990056 truepoint5000alarmTributaryLocalInputLoopback6 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback6 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback6 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990057 truepoint5000alarmTributaryLocalInputLoopback7 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback7 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback7 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990058 truepoint5000alarmTributaryLocalInputLoopback8 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback8 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback8 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990059 truepoint5000alarmTributaryLocalInputLoopback9 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback9 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback9 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990060 truepoint5000alarmTributaryLocalInputLoopback10 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback10 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback10 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990061 truepoint5000alarmTributaryLocalInputLoopback11 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback11 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback11 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990062 truepoint5000alarmTributaryLocalInputLoopback12 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback12 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback12 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990063 truepoint5000alarmTributaryLocalInputLoopback13 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback13 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback13 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990064 truepoint5000alarmTributaryLocalInputLoopback14 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback14 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback14 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990065 truepoint5000alarmTributaryLocalInputLoopback15 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback15 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback15 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990066 truepoint5000alarmTributaryLocalInputLoopback16 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback16 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback16 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990067 truepoint5000alarmTributaryLocalInputLoopback17 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback17 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback17 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990068 truepoint5000alarmTributaryLocalInputLoopback18 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback18 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback18 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990069 truepoint5000alarmTributaryLocalInputLoopback19 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback19 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback19 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990070 truepoint5000alarmTributaryLocalInputLoopback20 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback20 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback20 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990071 truepoint5000alarmTributaryLocalInputLoopback21 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback21 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback21 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990072 truepoint5000alarmTributaryLocalInputLoopback22 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback22 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback22 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990073 truepoint5000alarmTributaryLocalInputLoopback23 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback23 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback23 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990074 truepoint5000alarmTributaryLocalInputLoopback24 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback24 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback24 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990075 truepoint5000alarmTributaryLocalInputLoopback25 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback25 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback25 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990076 truepoint5000alarmTributaryLocalInputLoopback26 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback26 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback26 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990077 truepoint5000alarmTributaryLocalInputLoopback27 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback27 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback27 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990078 truepoint5000alarmTributaryLocalInputLoopback28 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback28 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback28 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990079 truepoint5000alarmTributaryLocalRadioLoopback1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990080 truepoint5000alarmTributaryLocalRadioLoopback2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990081 truepoint5000alarmTributaryLocalRadioLoopback3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990082 truepoint5000alarmTributaryLocalRadioLoopback4 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback4 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback4 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990083 truepoint5000alarmTributaryLocalRadioLoopback5 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback5 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback5 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990084 truepoint5000alarmTributaryLocalRadioLoopback6 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback6 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback6 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990085 truepoint5000alarmTributaryLocalRadioLoopback7 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback7 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback7 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990086 truepoint5000alarmTributaryLocalRadioLoopback8 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback8 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback8 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990087 truepoint5000alarmTributaryLocalRadioLoopback9 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback9 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback9 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990088 truepoint5000alarmTributaryLocalRadioLoopback10 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback10 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback10 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990089 truepoint5000alarmTributaryLocalRadioLoopback11 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback11 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback11 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990090 truepoint5000alarmTributaryLocalRadioLoopback12 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback12 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback12 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990091 truepoint5000alarmTributaryLocalRadioLoopback13 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback13 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback13 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990092 truepoint5000alarmTributaryLocalRadioLoopback14 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback14 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback14 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990093 truepoint5000alarmTributaryLocalRadioLoopback15 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback15 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback15 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990094 truepoint5000alarmTributaryLocalRadioLoopback16 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback16 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback16 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990095 truepoint5000alarmTributaryLocalRadioLoopback17 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback17 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback17 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990096 truepoint5000alarmTributaryLocalRadioLoopback18 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback18 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback18 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990097 truepoint5000alarmTributaryLocalRadioLoopback19 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback19 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback19 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990098 truepoint5000alarmTributaryLocalRadioLoopback20 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback20 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback20 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990099 truepoint5000alarmTributaryLocalRadioLoopback21 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback21 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback21 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990100 truepoint5000alarmTributaryLocalRadioLoopback22 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback22 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback22 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990101 truepoint5000alarmTributaryLocalRadioLoopback23 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback23 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback23 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990102 truepoint5000alarmTributaryLocalRadioLoopback24 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback24 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback24 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990103 truepoint5000alarmTributaryLocalRadioLoopback25 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback25 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback25 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990104 truepoint5000alarmTributaryLocalRadioLoopback26 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback26 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback26 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990105 truepoint5000alarmTributaryLocalRadioLoopback27 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback27 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback27 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990106 truepoint5000alarmTributaryLocalRadioLoopback28 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback28 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback28 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990107 truepoint5000alarmTributaryRemoteRadioLoopback1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990108 truepoint5000alarmTributaryRemoteRadioLoopback2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990109 truepoint5000alarmTributaryRemoteRadioLoopback3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990110 truepoint5000alarmTributaryRemoteRadioLoopback4 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback4 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback4 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990111 truepoint5000alarmTributaryRemoteRadioLoopback5 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback5 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback5 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990112 truepoint5000alarmTributaryRemoteRadioLoopback6 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback6 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback6 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990113 truepoint5000alarmTributaryRemoteRadioLoopback7 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback7 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback7 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990114 truepoint5000alarmTributaryRemoteRadioLoopback8 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback8 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback8 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990115 truepoint5000alarmTributaryRemoteRadioLoopback9 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback9 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback9 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990116 truepoint5000alarmTributaryRemoteRadioLoopback10 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback10 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback10 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990117 truepoint5000alarmTributaryRemoteRadioLoopback11 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback11 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback11 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990118 truepoint5000alarmTributaryRemoteRadioLoopback12 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback12 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback12 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990119 truepoint5000alarmTributaryRemoteRadioLoopback13 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback13 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback13 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990120 truepoint5000alarmTributaryRemoteRadioLoopback14 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback14 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback14 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990121 truepoint5000alarmTributaryRemoteRadioLoopback15 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback15 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback15 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990122 truepoint5000alarmTributaryRemoteRadioLoopback16 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback16 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback16 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990123 truepoint5000alarmTributaryRemoteRadioLoopback17 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback17 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback17 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990124 truepoint5000alarmTributaryRemoteRadioLoopback18 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback18 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback18 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990125 truepoint5000alarmTributaryRemoteRadioLoopback19 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback19 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback19 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990126 truepoint5000alarmTributaryRemoteRadioLoopback20 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback20 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback20 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990127 truepoint5000alarmTributaryRemoteRadioLoopback21 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback21 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback21 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990128 truepoint5000alarmTributaryRemoteRadioLoopback22 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback22 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback22 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990129 truepoint5000alarmTributaryRemoteRadioLoopback23 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback23 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback23 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990130 truepoint5000alarmTributaryRemoteRadioLoopback24 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback24 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback24 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990131 truepoint5000alarmTributaryRemoteRadioLoopback25 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback25 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback25 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990132 truepoint5000alarmTributaryRemoteRadioLoopback26 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback26 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback26 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990133 truepoint5000alarmTributaryRemoteRadioLoopback27 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback27 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback27 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990134 truepoint5000alarmTributaryRemoteRadioLoopback28 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback28 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback28 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990135 truepoint5000alarmTributaryRemoteRadioLoopbackRequest1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990136 truepoint5000alarmTributaryRemoteRadioLoopbackRequest2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990137 truepoint5000alarmTributaryRemoteRadioLoopbackRequest3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990138 truepoint5000alarmTributaryRemoteRadioLoopbackRequest4 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest4 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest4 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990139 truepoint5000alarmTributaryRemoteRadioLoopbackRequest5 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest5 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest5 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990140 truepoint5000alarmTributaryRemoteRadioLoopbackRequest6 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest6 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest6 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990141 truepoint5000alarmTributaryRemoteRadioLoopbackRequest7 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest7 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest7 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990142 truepoint5000alarmTributaryRemoteRadioLoopbackRequest8 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest8 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest8 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990143 truepoint5000alarmTributaryRemoteRadioLoopbackRequest9 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest9 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest9 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990144 truepoint5000alarmTributaryRemoteRadioLoopbackRequest10 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest10 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest10 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990145 truepoint5000alarmTributaryRemoteRadioLoopbackRequest11 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest11 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest11 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990146 truepoint5000alarmTributaryRemoteRadioLoopbackRequest12 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest12 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest12 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990147 truepoint5000alarmTributaryRemoteRadioLoopbackRequest13 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest13 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest13 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990148 truepoint5000alarmTributaryRemoteRadioLoopbackRequest14 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest14 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest14 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990149 truepoint5000alarmTributaryRemoteRadioLoopbackRequest15 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest15 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest15 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990150 truepoint5000alarmTributaryRemoteRadioLoopbackRequest16 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest16 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest16 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990151 truepoint5000alarmTributaryRemoteRadioLoopbackRequest17 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest17 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest17 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990152 truepoint5000alarmTributaryRemoteRadioLoopbackRequest18 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest18 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest18 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990153 truepoint5000alarmTributaryRemoteRadioLoopbackRequest19 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest19 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest19 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990154 truepoint5000alarmTributaryRemoteRadioLoopbackRequest20 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest20 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest20 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990155 truepoint5000alarmTributaryRemoteRadioLoopbackRequest21 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest21 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest21 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990156 truepoint5000alarmTributaryRemoteRadioLoopbackRequest22 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest22 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest22 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990157 truepoint5000alarmTributaryRemoteRadioLoopbackRequest23 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest23 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest23 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990158 truepoint5000alarmTributaryRemoteRadioLoopbackRequest24 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest24 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest24 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990159 truepoint5000alarmTributaryRemoteRadioLoopbackRequest25 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest25 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest25 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990160 truepoint5000alarmTributaryRemoteRadioLoopbackRequest26 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest26 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest26 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990161 truepoint5000alarmTributaryRemoteRadioLoopbackRequest27 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest27 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest27 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990162 truepoint5000alarmTributaryRemoteRadioLoopbackRequest28 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest28 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest28 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990163 truepoint5000alarmOC3STM1LocalInputLoopback TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1LocalInputLoopback } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1LocalInputLoopback ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990164 truepoint5000alarmOC3STM1LocalRadioLoopback TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1LocalRadioLoopback } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1LocalRadioLoopback ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990165 truepoint5000alarmOC3STM1RemoteRadioLoopback TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1RemoteRadioLoopback } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1RemoteRadioLoopback ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990166 truepoint5000alarmOC3STM1RemoteRadioLoopbackRequest TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1RemoteRadioLoopbackRequest } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1RemoteRadioLoopbackRequest ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990167 truepoint5000alarmE3DS3LocalInputLoopback1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3LocalInputLoopback1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3LocalInputLoopback1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990168 truepoint5000alarmDS3LocalInputLoopback2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalInputLoopback2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalInputLoopback2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990169 truepoint5000alarmDS3LocalInputLoopback3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalInputLoopback3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalInputLoopback3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990170 truepoint5000alarmE3DS3LocalRadioLoopback1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3LocalRadioLoopback1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3LocalRadioLoopback1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990171 truepoint5000alarmDS3LocalRadioLoopback2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalRadioLoopback2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalRadioLoopback2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990172 truepoint5000alarmDS3LocalRadioLoopback3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalRadioLoopback3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalRadioLoopback3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990173 truepoint5000alarmE3DS3RemoteRadioLoopback1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3RemoteRadioLoopback1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3RemoteRadioLoopback1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990174 truepoint5000alarmDS3RemoteRadioLoopback2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopback2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopback2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990175 truepoint5000alarmDS3RemoteRadioLoopback3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopback3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopback3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990176 truepoint5000alarmE3DS3RemoteRadioLoopbackRequest1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3RemoteRadioLoopbackRequest1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3RemoteRadioLoopbackRequest1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990177 truepoint5000alarmDS3RemoteRadioLoopbackRequest2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopbackRequest2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopbackRequest2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990178 truepoint5000alarmDS3RemoteRadioLoopbackRequest3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopbackRequest3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopbackRequest3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990179 truepoint5000alarmWaysideLocalInputLoopback1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalInputLoopback1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalInputLoopback1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990180 truepoint5000alarmWaysideLocalInputLoopback2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalInputLoopback2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalInputLoopback2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990181 truepoint5000alarmWaysideLocalInputLoopback3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalInputLoopback3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalInputLoopback3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990182 truepoint5000alarmWaysideLocalRadioLoopback1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalRadioLoopback1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalRadioLoopback1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990183 truepoint5000alarmWaysideLocalRadioLoopback2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalRadioLoopback2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalRadioLoopback2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990184 truepoint5000alarmWaysideLocalRadioLoopback3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalRadioLoopback3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalRadioLoopback3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990185 truepoint5000alarmWaysideRemoteRadioLoopback1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopback1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopback1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990186 truepoint5000alarmWaysideRemoteRadioLoopback2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopback2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopback2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990187 truepoint5000alarmWaysideRemoteRadioLoopback3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopback3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopback3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990188 truepoint5000alarmWaysideRemoteRadioLoopbackRequest1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopbackRequest1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopbackRequest1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990189 truepoint5000alarmWaysideRemoteRadioLoopbackRequest2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopbackRequest2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopbackRequest2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990190 truepoint5000alarmWaysideRemoteRadioLoopbackRequest3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopbackRequest3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopbackRequest3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990191 truepoint5000alarmModemIFLoopback-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmModemIFLoopback-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmModemIFLoopback-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990192 truepoint5000alarmMuxHighLevelLoopback-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMuxHighLevelLoopback-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMuxHighLevelLoopback-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990193 truepoint5000alarmTributaryLocalInputLoopback1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990194 truepoint5000alarmTributaryLocalInputLoopback2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990195 truepoint5000alarmTributaryLocalInputLoopback3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990196 truepoint5000alarmTributaryLocalInputLoopback4-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback4-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback4-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990197 truepoint5000alarmTributaryLocalInputLoopback5-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback5-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback5-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990198 truepoint5000alarmTributaryLocalInputLoopback6-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback6-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback6-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990199 truepoint5000alarmTributaryLocalInputLoopback7-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback7-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback7-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990200 truepoint5000alarmTributaryLocalInputLoopback8-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback8-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback8-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990201 truepoint5000alarmTributaryLocalInputLoopback9-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback9-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback9-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990202 truepoint5000alarmTributaryLocalInputLoopback10-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback10-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback10-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990203 truepoint5000alarmTributaryLocalInputLoopback11-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback11-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback11-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990204 truepoint5000alarmTributaryLocalInputLoopback12-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback12-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback12-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990205 truepoint5000alarmTributaryLocalInputLoopback13-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback13-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback13-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990206 truepoint5000alarmTributaryLocalInputLoopback14-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback14-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback14-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990207 truepoint5000alarmTributaryLocalInputLoopback15-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback15-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback15-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990208 truepoint5000alarmTributaryLocalInputLoopback16-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback16-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback16-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990209 truepoint5000alarmTributaryLocalInputLoopback17-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback17-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback17-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990210 truepoint5000alarmTributaryLocalInputLoopback18-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback18-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback18-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990211 truepoint5000alarmTributaryLocalInputLoopback19-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback19-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback19-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990212 truepoint5000alarmTributaryLocalInputLoopback20-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback20-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback20-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990213 truepoint5000alarmTributaryLocalInputLoopback21-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback21-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback21-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990214 truepoint5000alarmTributaryLocalInputLoopback22-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback22-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback22-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990215 truepoint5000alarmTributaryLocalInputLoopback23-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback23-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback23-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990216 truepoint5000alarmTributaryLocalInputLoopback24-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback24-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback24-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990217 truepoint5000alarmTributaryLocalInputLoopback25-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback25-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback25-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990218 truepoint5000alarmTributaryLocalInputLoopback26-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback26-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback26-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990219 truepoint5000alarmTributaryLocalInputLoopback27-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback27-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback27-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990220 truepoint5000alarmTributaryLocalInputLoopback28-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback28-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback28-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990221 truepoint5000alarmTributaryLocalRadioLoopback1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990222 truepoint5000alarmTributaryLocalRadioLoopback2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990223 truepoint5000alarmTributaryLocalRadioLoopback3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990224 truepoint5000alarmTributaryLocalRadioLoopback4-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback4-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback4-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990225 truepoint5000alarmTributaryLocalRadioLoopback5-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback5-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback5-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990226 truepoint5000alarmTributaryLocalRadioLoopback6-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback6-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback6-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990227 truepoint5000alarmTributaryLocalRadioLoopback7-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback7-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback7-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990228 truepoint5000alarmTributaryLocalRadioLoopback8-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback8-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback8-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990229 truepoint5000alarmTributaryLocalRadioLoopback9-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback9-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback9-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990230 truepoint5000alarmTributaryLocalRadioLoopback10-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback10-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback10-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990231 truepoint5000alarmTributaryLocalRadioLoopback11-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback11-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback11-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990232 truepoint5000alarmTributaryLocalRadioLoopback12-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback12-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback12-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990233 truepoint5000alarmTributaryLocalRadioLoopback13-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback13-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback13-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990234 truepoint5000alarmTributaryLocalRadioLoopback14-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback14-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback14-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990235 truepoint5000alarmTributaryLocalRadioLoopback15-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback15-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback15-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990236 truepoint5000alarmTributaryLocalRadioLoopback16-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback16-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback16-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990237 truepoint5000alarmTributaryLocalRadioLoopback17-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback17-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback17-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990238 truepoint5000alarmTributaryLocalRadioLoopback18-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback18-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback18-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990239 truepoint5000alarmTributaryLocalRadioLoopback19-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback19-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback19-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990240 truepoint5000alarmTributaryLocalRadioLoopback20-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback20-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback20-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990241 truepoint5000alarmTributaryLocalRadioLoopback21-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback21-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback21-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990242 truepoint5000alarmTributaryLocalRadioLoopback22-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback22-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback22-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990243 truepoint5000alarmTributaryLocalRadioLoopback23-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback23-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback23-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990244 truepoint5000alarmTributaryLocalRadioLoopback24-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback24-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback24-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990245 truepoint5000alarmTributaryLocalRadioLoopback25-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback25-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback25-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990246 truepoint5000alarmTributaryLocalRadioLoopback26-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback26-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback26-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990247 truepoint5000alarmTributaryLocalRadioLoopback27-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback27-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback27-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990248 truepoint5000alarmTributaryLocalRadioLoopback28-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback28-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback28-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990249 truepoint5000alarmTributaryRemoteRadioLoopback1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990250 truepoint5000alarmTributaryRemoteRadioLoopback2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990251 truepoint5000alarmTributaryRemoteRadioLoopback3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990252 truepoint5000alarmTributaryRemoteRadioLoopback4-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback4-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback4-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990253 truepoint5000alarmTributaryRemoteRadioLoopback5-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback5-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback5-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990254 truepoint5000alarmTributaryRemoteRadioLoopback6-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback6-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback6-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990255 truepoint5000alarmTributaryRemoteRadioLoopback7-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback7-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback7-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990256 truepoint5000alarmTributaryRemoteRadioLoopback8-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback8-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback8-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990257 truepoint5000alarmTributaryRemoteRadioLoopback9-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback9-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback9-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990258 truepoint5000alarmTributaryRemoteRadioLoopback10-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback10-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback10-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990259 truepoint5000alarmTributaryRemoteRadioLoopback11-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback11-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback11-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990260 truepoint5000alarmTributaryRemoteRadioLoopback12-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback12-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback12-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990261 truepoint5000alarmTributaryRemoteRadioLoopback13-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback13-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback13-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990262 truepoint5000alarmTributaryRemoteRadioLoopback14-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback14-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback14-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990263 truepoint5000alarmTributaryRemoteRadioLoopback15-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback15-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback15-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990264 truepoint5000alarmTributaryRemoteRadioLoopback16-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback16-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback16-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990265 truepoint5000alarmTributaryRemoteRadioLoopback17-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback17-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback17-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990266 truepoint5000alarmTributaryRemoteRadioLoopback18-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback18-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback18-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990267 truepoint5000alarmTributaryRemoteRadioLoopback19-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback19-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback19-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990268 truepoint5000alarmTributaryRemoteRadioLoopback20-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback20-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback20-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990269 truepoint5000alarmTributaryRemoteRadioLoopback21-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback21-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback21-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990270 truepoint5000alarmTributaryRemoteRadioLoopback22-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback22-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback22-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990271 truepoint5000alarmTributaryRemoteRadioLoopback23-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback23-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback23-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990272 truepoint5000alarmTributaryRemoteRadioLoopback24-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback24-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback24-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990273 truepoint5000alarmTributaryRemoteRadioLoopback25-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback25-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback25-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990274 truepoint5000alarmTributaryRemoteRadioLoopback26-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback26-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback26-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990275 truepoint5000alarmTributaryRemoteRadioLoopback27-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback27-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback27-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990276 truepoint5000alarmTributaryRemoteRadioLoopback28-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback28-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback28-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990277 truepoint5000alarmTributaryRemoteRadioLoopbackRequest1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990278 truepoint5000alarmTributaryRemoteRadioLoopbackRequest2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990279 truepoint5000alarmTributaryRemoteRadioLoopbackRequest3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990280 truepoint5000alarmTributaryRemoteRadioLoopbackRequest4-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest4-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest4-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990281 truepoint5000alarmTributaryRemoteRadioLoopbackRequest5-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest5-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest5-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990282 truepoint5000alarmTributaryRemoteRadioLoopbackRequest6-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest6-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest6-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990283 truepoint5000alarmTributaryRemoteRadioLoopbackRequest7-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest7-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest7-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990284 truepoint5000alarmTributaryRemoteRadioLoopbackRequest8-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest8-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest8-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990285 truepoint5000alarmTributaryRemoteRadioLoopbackRequest9-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest9-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest9-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990286 truepoint5000alarmTributaryRemoteRadioLoopbackRequest10-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest10-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest10-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990287 truepoint5000alarmTributaryRemoteRadioLoopbackRequest11-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest11-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest11-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990288 truepoint5000alarmTributaryRemoteRadioLoopbackRequest12-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest12-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest12-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990289 truepoint5000alarmTributaryRemoteRadioLoopbackRequest13-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest13-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest13-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990290 truepoint5000alarmTributaryRemoteRadioLoopbackRequest14-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest14-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest14-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990291 truepoint5000alarmTributaryRemoteRadioLoopbackRequest15-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest15-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest15-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990292 truepoint5000alarmTributaryRemoteRadioLoopbackRequest16-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest16-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest16-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990293 truepoint5000alarmTributaryRemoteRadioLoopbackRequest17-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest17-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest17-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990294 truepoint5000alarmTributaryRemoteRadioLoopbackRequest18-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest18-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest18-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990295 truepoint5000alarmTributaryRemoteRadioLoopbackRequest19-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest19-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest19-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990296 truepoint5000alarmTributaryRemoteRadioLoopbackRequest20-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest20-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest20-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990297 truepoint5000alarmTributaryRemoteRadioLoopbackRequest21-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest21-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest21-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990298 truepoint5000alarmTributaryRemoteRadioLoopbackRequest22-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest22-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest22-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990299 truepoint5000alarmTributaryRemoteRadioLoopbackRequest23-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest23-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest23-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990300 truepoint5000alarmTributaryRemoteRadioLoopbackRequest24-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest24-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest24-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990301 truepoint5000alarmTributaryRemoteRadioLoopbackRequest25-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest25-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest25-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990302 truepoint5000alarmTributaryRemoteRadioLoopbackRequest26-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest26-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest26-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990303 truepoint5000alarmTributaryRemoteRadioLoopbackRequest27-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest27-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest27-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990304 truepoint5000alarmTributaryRemoteRadioLoopbackRequest28-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest28-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest28-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990305 truepoint5000alarmOC3STM1LocalInputLoopback-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1LocalInputLoopback-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1LocalInputLoopback-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990306 truepoint5000alarmOC3STM1LocalRadioLoopback-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1LocalRadioLoopback-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1LocalRadioLoopback-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990307 truepoint5000alarmOC3STM1RemoteRadioLoopback-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1RemoteRadioLoopback-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1RemoteRadioLoopback-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990308 truepoint5000alarmOC3STM1RemoteRadioLoopbackRequest-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1RemoteRadioLoopbackRequest-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1RemoteRadioLoopbackRequest-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990309 truepoint5000alarmE3DS3LocalInputLoopback1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3LocalInputLoopback1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3LocalInputLoopback1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990310 truepoint5000alarmDS3LocalInputLoopback2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalInputLoopback2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalInputLoopback2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990311 truepoint5000alarmDS3LocalInputLoopback3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalInputLoopback3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalInputLoopback3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990312 truepoint5000alarmE3DS3LocalRadioLoopback1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3LocalRadioLoopback1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3LocalRadioLoopback1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990313 truepoint5000alarmDS3LocalRadioLoopback2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalRadioLoopback2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalRadioLoopback2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990314 truepoint5000alarmDS3LocalRadioLoopback3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalRadioLoopback3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalRadioLoopback3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990315 truepoint5000alarmE3DS3RemoteRadioLoopback1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3RemoteRadioLoopback1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3RemoteRadioLoopback1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990316 truepoint5000alarmDS3RemoteRadioLoopback2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopback2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopback2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990317 truepoint5000alarmDS3RemoteRadioLoopback3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopback3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopback3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990318 truepoint5000alarmE3DS3RemoteRadioLoopbackRequest1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3RemoteRadioLoopbackRequest1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3RemoteRadioLoopbackRequest1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990319 truepoint5000alarmDS3RemoteRadioLoopbackRequest2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopbackRequest2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopbackRequest2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990320 truepoint5000alarmDS3RemoteRadioLoopbackRequest3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopbackRequest3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopbackRequest3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990321 truepoint5000alarmWaysideLocalInputLoopback1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalInputLoopback1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalInputLoopback1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990322 truepoint5000alarmWaysideLocalInputLoopback2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalInputLoopback2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalInputLoopback2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990323 truepoint5000alarmWaysideLocalInputLoopback3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalInputLoopback3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalInputLoopback3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990324 truepoint5000alarmWaysideLocalRadioLoopback1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalRadioLoopback1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalRadioLoopback1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990325 truepoint5000alarmWaysideLocalRadioLoopback2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalRadioLoopback2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalRadioLoopback2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990326 truepoint5000alarmWaysideLocalRadioLoopback3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalRadioLoopback3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalRadioLoopback3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990327 truepoint5000alarmWaysideRemoteRadioLoopback1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopback1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopback1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990328 truepoint5000alarmWaysideRemoteRadioLoopback2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopback2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopback2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990329 truepoint5000alarmWaysideRemoteRadioLoopback3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopback3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopback3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990330 truepoint5000alarmWaysideRemoteRadioLoopbackRequest1-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopbackRequest1-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopbackRequest1-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990331 truepoint5000alarmWaysideRemoteRadioLoopbackRequest2-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopbackRequest2-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopbackRequest2-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990332 truepoint5000alarmWaysideRemoteRadioLoopbackRequest3-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopbackRequest3-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopbackRequest3-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990333 truepoint5000alarmModemIFLoopback-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmModemIFLoopback-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmModemIFLoopback-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990334 truepoint5000alarmMuxHighLevelLoopback-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmMuxHighLevelLoopback-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmMuxHighLevelLoopback-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990335 truepoint5000alarmTributaryLocalInputLoopback1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990336 truepoint5000alarmTributaryLocalInputLoopback2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990337 truepoint5000alarmTributaryLocalInputLoopback3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990338 truepoint5000alarmTributaryLocalInputLoopback4-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback4-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback4-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990339 truepoint5000alarmTributaryLocalInputLoopback5-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback5-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback5-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990340 truepoint5000alarmTributaryLocalInputLoopback6-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback6-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback6-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990341 truepoint5000alarmTributaryLocalInputLoopback7-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback7-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback7-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990342 truepoint5000alarmTributaryLocalInputLoopback8-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback8-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback8-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990343 truepoint5000alarmTributaryLocalInputLoopback9-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback9-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback9-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990344 truepoint5000alarmTributaryLocalInputLoopback10-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback10-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback10-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990345 truepoint5000alarmTributaryLocalInputLoopback11-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback11-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback11-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990346 truepoint5000alarmTributaryLocalInputLoopback12-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback12-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback12-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990347 truepoint5000alarmTributaryLocalInputLoopback13-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback13-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback13-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990348 truepoint5000alarmTributaryLocalInputLoopback14-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback14-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback14-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990349 truepoint5000alarmTributaryLocalInputLoopback15-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback15-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback15-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990350 truepoint5000alarmTributaryLocalInputLoopback16-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback16-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback16-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990351 truepoint5000alarmTributaryLocalInputLoopback17-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback17-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback17-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990352 truepoint5000alarmTributaryLocalInputLoopback18-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback18-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback18-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990353 truepoint5000alarmTributaryLocalInputLoopback19-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback19-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback19-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990354 truepoint5000alarmTributaryLocalInputLoopback20-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback20-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback20-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990355 truepoint5000alarmTributaryLocalInputLoopback21-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback21-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback21-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990356 truepoint5000alarmTributaryLocalInputLoopback22-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback22-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback22-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990357 truepoint5000alarmTributaryLocalInputLoopback23-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback23-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback23-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990358 truepoint5000alarmTributaryLocalInputLoopback24-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback24-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback24-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990359 truepoint5000alarmTributaryLocalInputLoopback25-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback25-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback25-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990360 truepoint5000alarmTributaryLocalInputLoopback26-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback26-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback26-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990361 truepoint5000alarmTributaryLocalInputLoopback27-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback27-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback27-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990362 truepoint5000alarmTributaryLocalInputLoopback28-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalInputLoopback28-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalInputLoopback28-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990363 truepoint5000alarmTributaryLocalRadioLoopback1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990364 truepoint5000alarmTributaryLocalRadioLoopback2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990365 truepoint5000alarmTributaryLocalRadioLoopback3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990366 truepoint5000alarmTributaryLocalRadioLoopback4-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback4-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback4-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990367 truepoint5000alarmTributaryLocalRadioLoopback5-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback5-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback5-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990368 truepoint5000alarmTributaryLocalRadioLoopback6-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback6-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback6-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990369 truepoint5000alarmTributaryLocalRadioLoopback7-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback7-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback7-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990370 truepoint5000alarmTributaryLocalRadioLoopback8-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback8-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback8-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990371 truepoint5000alarmTributaryLocalRadioLoopback9-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback9-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback9-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990372 truepoint5000alarmTributaryLocalRadioLoopback10-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback10-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback10-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990373 truepoint5000alarmTributaryLocalRadioLoopback11-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback11-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback11-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990374 truepoint5000alarmTributaryLocalRadioLoopback12-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback12-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback12-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990375 truepoint5000alarmTributaryLocalRadioLoopback13-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback13-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback13-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990376 truepoint5000alarmTributaryLocalRadioLoopback14-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback14-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback14-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990377 truepoint5000alarmTributaryLocalRadioLoopback15-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback15-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback15-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990378 truepoint5000alarmTributaryLocalRadioLoopback16-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback16-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback16-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990379 truepoint5000alarmTributaryLocalRadioLoopback17-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback17-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback17-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990380 truepoint5000alarmTributaryLocalRadioLoopback18-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback18-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback18-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990381 truepoint5000alarmTributaryLocalRadioLoopback19-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback19-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback19-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990382 truepoint5000alarmTributaryLocalRadioLoopback20-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback20-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback20-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990383 truepoint5000alarmTributaryLocalRadioLoopback21-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback21-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback21-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990384 truepoint5000alarmTributaryLocalRadioLoopback22-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback22-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback22-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990385 truepoint5000alarmTributaryLocalRadioLoopback23-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback23-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback23-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990386 truepoint5000alarmTributaryLocalRadioLoopback24-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback24-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback24-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990387 truepoint5000alarmTributaryLocalRadioLoopback25-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback25-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback25-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990388 truepoint5000alarmTributaryLocalRadioLoopback26-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback26-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback26-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990389 truepoint5000alarmTributaryLocalRadioLoopback27-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback27-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback27-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990390 truepoint5000alarmTributaryLocalRadioLoopback28-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryLocalRadioLoopback28-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryLocalRadioLoopback28-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990391 truepoint5000alarmTributaryRemoteRadioLoopback1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990392 truepoint5000alarmTributaryRemoteRadioLoopback2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990393 truepoint5000alarmTributaryRemoteRadioLoopback3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990394 truepoint5000alarmTributaryRemoteRadioLoopback4-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback4-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback4-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990395 truepoint5000alarmTributaryRemoteRadioLoopback5-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback5-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback5-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990396 truepoint5000alarmTributaryRemoteRadioLoopback6-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback6-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback6-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990397 truepoint5000alarmTributaryRemoteRadioLoopback7-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback7-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback7-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990398 truepoint5000alarmTributaryRemoteRadioLoopback8-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback8-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback8-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990399 truepoint5000alarmTributaryRemoteRadioLoopback9-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback9-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback9-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990400 truepoint5000alarmTributaryRemoteRadioLoopback10-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback10-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback10-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990401 truepoint5000alarmTributaryRemoteRadioLoopback11-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback11-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback11-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990402 truepoint5000alarmTributaryRemoteRadioLoopback12-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback12-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback12-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990403 truepoint5000alarmTributaryRemoteRadioLoopback13-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback13-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback13-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990404 truepoint5000alarmTributaryRemoteRadioLoopback14-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback14-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback14-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990405 truepoint5000alarmTributaryRemoteRadioLoopback15-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback15-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback15-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990406 truepoint5000alarmTributaryRemoteRadioLoopback16-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback16-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback16-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990407 truepoint5000alarmTributaryRemoteRadioLoopback17-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback17-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback17-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990408 truepoint5000alarmTributaryRemoteRadioLoopback18-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback18-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback18-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990409 truepoint5000alarmTributaryRemoteRadioLoopback19-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback19-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback19-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990410 truepoint5000alarmTributaryRemoteRadioLoopback20-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback20-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback20-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990411 truepoint5000alarmTributaryRemoteRadioLoopback21-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback21-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback21-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990412 truepoint5000alarmTributaryRemoteRadioLoopback22-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback22-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback22-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990413 truepoint5000alarmTributaryRemoteRadioLoopback23-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback23-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback23-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990414 truepoint5000alarmTributaryRemoteRadioLoopback24-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback24-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback24-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990415 truepoint5000alarmTributaryRemoteRadioLoopback25-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback25-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback25-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990416 truepoint5000alarmTributaryRemoteRadioLoopback26-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback26-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback26-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990417 truepoint5000alarmTributaryRemoteRadioLoopback27-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback27-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback27-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990418 truepoint5000alarmTributaryRemoteRadioLoopback28-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopback28-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopback28-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990419 truepoint5000alarmTributaryRemoteRadioLoopbackRequest1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990420 truepoint5000alarmTributaryRemoteRadioLoopbackRequest2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990421 truepoint5000alarmTributaryRemoteRadioLoopbackRequest3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990422 truepoint5000alarmTributaryRemoteRadioLoopbackRequest4-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest4-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest4-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990423 truepoint5000alarmTributaryRemoteRadioLoopbackRequest5-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest5-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest5-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990424 truepoint5000alarmTributaryRemoteRadioLoopbackRequest6-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest6-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest6-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990425 truepoint5000alarmTributaryRemoteRadioLoopbackRequest7-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest7-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest7-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990426 truepoint5000alarmTributaryRemoteRadioLoopbackRequest8-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest8-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest8-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990427 truepoint5000alarmTributaryRemoteRadioLoopbackRequest9-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest9-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest9-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990428 truepoint5000alarmTributaryRemoteRadioLoopbackRequest10-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest10-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest10-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990429 truepoint5000alarmTributaryRemoteRadioLoopbackRequest11-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest11-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest11-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990430 truepoint5000alarmTributaryRemoteRadioLoopbackRequest12-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest12-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest12-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990431 truepoint5000alarmTributaryRemoteRadioLoopbackRequest13-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest13-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest13-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990432 truepoint5000alarmTributaryRemoteRadioLoopbackRequest14-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest14-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest14-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990433 truepoint5000alarmTributaryRemoteRadioLoopbackRequest15-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest15-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest15-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990434 truepoint5000alarmTributaryRemoteRadioLoopbackRequest16-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest16-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest16-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990435 truepoint5000alarmTributaryRemoteRadioLoopbackRequest17-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest17-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest17-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990436 truepoint5000alarmTributaryRemoteRadioLoopbackRequest18-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest18-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest18-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990437 truepoint5000alarmTributaryRemoteRadioLoopbackRequest19-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest19-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest19-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990438 truepoint5000alarmTributaryRemoteRadioLoopbackRequest20-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest20-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest20-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990439 truepoint5000alarmTributaryRemoteRadioLoopbackRequest21-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest21-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest21-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990440 truepoint5000alarmTributaryRemoteRadioLoopbackRequest22-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest22-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest22-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990441 truepoint5000alarmTributaryRemoteRadioLoopbackRequest23-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest23-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest23-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990442 truepoint5000alarmTributaryRemoteRadioLoopbackRequest24-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest24-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest24-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990443 truepoint5000alarmTributaryRemoteRadioLoopbackRequest25-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest25-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest25-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990444 truepoint5000alarmTributaryRemoteRadioLoopbackRequest26-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest26-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest26-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990445 truepoint5000alarmTributaryRemoteRadioLoopbackRequest27-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest27-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest27-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990446 truepoint5000alarmTributaryRemoteRadioLoopbackRequest28-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributaryRemoteRadioLoopbackRequest28-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributaryRemoteRadioLoopbackRequest28-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990447 truepoint5000alarmOC3STM1LocalInputLoopback-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1LocalInputLoopback-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1LocalInputLoopback-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990448 truepoint5000alarmOC3STM1LocalRadioLoopback-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1LocalRadioLoopback-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1LocalRadioLoopback-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990449 truepoint5000alarmOC3STM1RemoteRadioLoopback-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1RemoteRadioLoopback-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1RemoteRadioLoopback-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990450 truepoint5000alarmOC3STM1RemoteRadioLoopbackRequest-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1RemoteRadioLoopbackRequest-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1RemoteRadioLoopbackRequest-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990451 truepoint5000alarmE3DS3LocalInputLoopback1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3LocalInputLoopback1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3LocalInputLoopback1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990452 truepoint5000alarmDS3LocalInputLoopback2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalInputLoopback2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalInputLoopback2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990453 truepoint5000alarmDS3LocalInputLoopback3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalInputLoopback3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalInputLoopback3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990454 truepoint5000alarmE3DS3LocalRadioLoopback1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3LocalRadioLoopback1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3LocalRadioLoopback1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990455 truepoint5000alarmDS3LocalRadioLoopback2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalRadioLoopback2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalRadioLoopback2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990456 truepoint5000alarmDS3LocalRadioLoopback3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3LocalRadioLoopback3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3LocalRadioLoopback3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990457 truepoint5000alarmE3DS3RemoteRadioLoopback1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3RemoteRadioLoopback1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3RemoteRadioLoopback1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990458 truepoint5000alarmDS3RemoteRadioLoopback2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopback2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopback2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990459 truepoint5000alarmDS3RemoteRadioLoopback3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopback3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopback3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990460 truepoint5000alarmE3DS3RemoteRadioLoopbackRequest1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS3RemoteRadioLoopbackRequest1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS3RemoteRadioLoopbackRequest1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990461 truepoint5000alarmDS3RemoteRadioLoopbackRequest2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopbackRequest2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopbackRequest2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990462 truepoint5000alarmDS3RemoteRadioLoopbackRequest3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS3RemoteRadioLoopbackRequest3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS3RemoteRadioLoopbackRequest3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990463 truepoint5000alarmWaysideLocalInputLoopback1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalInputLoopback1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalInputLoopback1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990464 truepoint5000alarmWaysideLocalInputLoopback2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalInputLoopback2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalInputLoopback2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990465 truepoint5000alarmWaysideLocalInputLoopback3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalInputLoopback3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalInputLoopback3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990466 truepoint5000alarmWaysideLocalRadioLoopback1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalRadioLoopback1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalRadioLoopback1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990467 truepoint5000alarmWaysideLocalRadioLoopback2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalRadioLoopback2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalRadioLoopback2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990468 truepoint5000alarmWaysideLocalRadioLoopback3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideLocalRadioLoopback3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideLocalRadioLoopback3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990469 truepoint5000alarmWaysideRemoteRadioLoopback1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopback1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopback1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990470 truepoint5000alarmWaysideRemoteRadioLoopback2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopback2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopback2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990471 truepoint5000alarmWaysideRemoteRadioLoopback3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopback3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopback3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990472 truepoint5000alarmWaysideRemoteRadioLoopbackRequest1-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopbackRequest1-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopbackRequest1-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990473 truepoint5000alarmWaysideRemoteRadioLoopbackRequest2-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopbackRequest2-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopbackRequest2-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990474 truepoint5000alarmWaysideRemoteRadioLoopbackRequest3-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWaysideRemoteRadioLoopbackRequest3-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWaysideRemoteRadioLoopbackRequest3-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990475 truepoint5000alarmRfuMuted-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRfuMuted-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRfuMuted-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990476 truepoint5000alarmRfuMuted-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRfuMuted-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRfuMuted-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990477 truepoint5000alarmTxCwTone-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxCwTone-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxCwTone-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990478 truepoint5000alarmTxCwTone-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxCwTone-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxCwTone-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990479 truepoint5000alarmControllerExternalInput-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmControllerExternalInput-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmControllerExternalInput-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990480 truepoint5000alarmControllerExternalInput-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmControllerExternalInput-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmControllerExternalInput-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990481 truepoint5000alarmOptCard1ExternalInput-0 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-0 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-0 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990482 truepoint5000alarmOptCard1ExternalInput-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990483 truepoint5000alarmOptCard1ExternalInput-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990484 truepoint5000alarmOptCard1ExternalInput-3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990485 truepoint5000alarmOptCard1ExternalInput-4 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-4 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-4 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990486 truepoint5000alarmOptCard1ExternalInput-5 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-5 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-5 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990487 truepoint5000alarmOptCard1ExternalInput-6 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-6 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-6 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990488 truepoint5000alarmOptCard1ExternalInput-7 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-7 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-7 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990489 truepoint5000alarmOptCard1ExternalInput-8 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-8 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-8 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990490 truepoint5000alarmOptCard1ExternalInput-9 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-9 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-9 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990491 truepoint5000alarmOptCard1ExternalInput-10 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-10 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-10 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990492 truepoint5000alarmOptCard1ExternalInput-11 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-11 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-11 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990493 truepoint5000alarmOptCard1ExternalInput-12 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-12 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-12 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990494 truepoint5000alarmOptCard1ExternalInput-13 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-13 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-13 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990495 truepoint5000alarmOptCard1ExternalInput-14 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-14 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-14 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990496 truepoint5000alarmOptCard1ExternalInput-15 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-15 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-15 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990497 truepoint5000alarmOptCard1ExternalInput-16 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-16 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-16 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990498 truepoint5000alarmOptCard1ExternalInput-17 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-17 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-17 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990499 truepoint5000alarmOptCard1ExternalInput-18 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-18 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-18 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990500 truepoint5000alarmOptCard1ExternalInput-19 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-19 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-19 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990501 truepoint5000alarmOptCard1ExternalInput-20 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-20 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-20 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990502 truepoint5000alarmOptCard1ExternalInput-21 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-21 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-21 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990503 truepoint5000alarmOptCard1ExternalInput-22 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-22 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-22 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990504 truepoint5000alarmOptCard1ExternalInput-23 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-23 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-23 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990505 truepoint5000alarmOptCard1ExternalInput-24 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-24 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-24 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990506 truepoint5000alarmOptCard1ExternalInput-25 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-25 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-25 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990507 truepoint5000alarmOptCard1ExternalInput-26 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-26 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-26 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990508 truepoint5000alarmOptCard1ExternalInput-27 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-27 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-27 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990509 truepoint5000alarmOptCard1ExternalInput-28 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-28 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-28 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990510 truepoint5000alarmOptCard1ExternalInput-29 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard1ExternalInput-29 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard1ExternalInput-29 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990511 truepoint5000alarmOptCard2ExternalInput-0 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-0 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-0 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990512 truepoint5000alarmOptCard2ExternalInput-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990513 truepoint5000alarmOptCard2ExternalInput-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990514 truepoint5000alarmOptCard2ExternalInput-3 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-3 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-3 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990515 truepoint5000alarmOptCard2ExternalInput-4 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-4 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-4 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990516 truepoint5000alarmOptCard2ExternalInput-5 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-5 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-5 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990517 truepoint5000alarmOptCard2ExternalInput-6 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-6 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-6 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990518 truepoint5000alarmOptCard2ExternalInput-7 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-7 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-7 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990519 truepoint5000alarmOptCard2ExternalInput-8 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-8 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-8 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990520 truepoint5000alarmOptCard2ExternalInput-9 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-9 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-9 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990521 truepoint5000alarmOptCard2ExternalInput-10 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-10 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-10 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990522 truepoint5000alarmOptCard2ExternalInput-11 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-11 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-11 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990523 truepoint5000alarmOptCard2ExternalInput-12 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-12 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-12 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990524 truepoint5000alarmOptCard2ExternalInput-13 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-13 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-13 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990525 truepoint5000alarmOptCard2ExternalInput-14 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-14 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-14 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990526 truepoint5000alarmOptCard2ExternalInput-15 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-15 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-15 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990527 truepoint5000alarmOptCard2ExternalInput-16 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-16 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-16 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990528 truepoint5000alarmOptCard2ExternalInput-17 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-17 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-17 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990529 truepoint5000alarmOptCard2ExternalInput-18 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-18 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-18 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990530 truepoint5000alarmOptCard2ExternalInput-19 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-19 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-19 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990531 truepoint5000alarmOptCard2ExternalInput-20 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-20 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-20 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990532 truepoint5000alarmOptCard2ExternalInput-21 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-21 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-21 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990533 truepoint5000alarmOptCard2ExternalInput-22 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-22 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-22 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990534 truepoint5000alarmOptCard2ExternalInput-23 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-23 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-23 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990535 truepoint5000alarmOptCard2ExternalInput-24 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-24 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-24 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990536 truepoint5000alarmOptCard2ExternalInput-25 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-25 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-25 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990537 truepoint5000alarmOptCard2ExternalInput-26 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-26 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-26 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990538 truepoint5000alarmOptCard2ExternalInput-27 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-27 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-27 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990539 truepoint5000alarmOptCard2ExternalInput-28 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-28 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-28 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990540 truepoint5000alarmOptCard2ExternalInput-29 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCard2ExternalInput-29 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCard2ExternalInput-29 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990541 truepoint5000alarmAbsentMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAbsentMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAbsentMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990542 truepoint5000alarmAbsentMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAbsentMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAbsentMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990543 truepoint5000alarmAbsentModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAbsentModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAbsentModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990544 truepoint5000alarmAbsentModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAbsentModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAbsentModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990545 truepoint5000alarmAbsentOptionalCard1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAbsentOptionalCard1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAbsentOptionalCard1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990546 truepoint5000alarmAbsentOptionalCard2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAbsentOptionalCard2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAbsentOptionalCard2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990547 truepoint5000alarmAbsentRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAbsentRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAbsentRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990548 truepoint5000alarmAbsentRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAbsentRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAbsentRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990549 truepoint5000alarmAbsentSDM TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAbsentSDM } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAbsentSDM ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990550 truepoint5000alarmFpgaDownloadModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaDownloadModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaDownloadModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990551 truepoint5000alarmFpgaSettingsModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaSettingsModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaSettingsModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990552 truepoint5000alarmUnknownCardModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmUnknownCardModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmUnknownCardModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990553 truepoint5000alarmFwNotUpgradedModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFwNotUpgradedModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFwNotUpgradedModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990554 truepoint5000alarmReplaceMeModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmReplaceMeModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmReplaceMeModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990555 truepoint5000alarmFpgaDownloadModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaDownloadModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaDownloadModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990556 truepoint5000alarmFpgaSettingsModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaSettingsModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaSettingsModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990557 truepoint5000alarmUnknownCardModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmUnknownCardModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmUnknownCardModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990558 truepoint5000alarmFwNotUpgradedModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFwNotUpgradedModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFwNotUpgradedModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990559 truepoint5000alarmReplaceMeModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmReplaceMeModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmReplaceMeModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990560 truepoint5000alarmTxClockInputLossMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxClockInputLossMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxClockInputLossMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990561 truepoint5000alarmTributary1TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990562 truepoint5000alarmTributary2TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990563 truepoint5000alarmTributary3TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990564 truepoint5000alarmTributary4TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990565 truepoint5000alarmTributary5TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990566 truepoint5000alarmTributary6TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990567 truepoint5000alarmTributary7TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990568 truepoint5000alarmTributary8TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990569 truepoint5000alarmTributary9TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990570 truepoint5000alarmTributary10TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990571 truepoint5000alarmTributary11TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990572 truepoint5000alarmTributary12TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990573 truepoint5000alarmTributary13TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990574 truepoint5000alarmTributary14TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990575 truepoint5000alarmTributary15TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990576 truepoint5000alarmTributary16TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990577 truepoint5000alarmTributary17TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990578 truepoint5000alarmTributary18TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990579 truepoint5000alarmTributary19TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990580 truepoint5000alarmTributary20TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990581 truepoint5000alarmTributary21TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990582 truepoint5000alarmTributary22TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990583 truepoint5000alarmTributary23TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990584 truepoint5000alarmTributary24TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990585 truepoint5000alarmTributary25TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990586 truepoint5000alarmTributary26TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990587 truepoint5000alarmTributary27TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990588 truepoint5000alarmTributary28TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990589 truepoint5000alarmTributary1TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990590 truepoint5000alarmTributary2TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990591 truepoint5000alarmTributary3TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990592 truepoint5000alarmTributary4TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990593 truepoint5000alarmTributary5TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990594 truepoint5000alarmTributary6TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990595 truepoint5000alarmTributary7TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990596 truepoint5000alarmTributary8TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990597 truepoint5000alarmTributary9TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990598 truepoint5000alarmTributary10TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990599 truepoint5000alarmTributary11TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990600 truepoint5000alarmTributary12TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990601 truepoint5000alarmTributary13TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990602 truepoint5000alarmTributary14TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990603 truepoint5000alarmTributary15TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990604 truepoint5000alarmTributary16TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990605 truepoint5000alarmTributary17TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990606 truepoint5000alarmTributary18TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990607 truepoint5000alarmTributary19TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990608 truepoint5000alarmTributary20TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990609 truepoint5000alarmTributary21TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990610 truepoint5000alarmTributary22TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990611 truepoint5000alarmTributary23TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990612 truepoint5000alarmTributary24TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990613 truepoint5000alarmTributary25TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990614 truepoint5000alarmTributary26TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990615 truepoint5000alarmTributary27TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990616 truepoint5000alarmTributary28TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990617 truepoint5000alarmTributary1TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990618 truepoint5000alarmTributary2TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990619 truepoint5000alarmTributary3TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990620 truepoint5000alarmTributary4TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990621 truepoint5000alarmTributary5TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990622 truepoint5000alarmTributary6TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990623 truepoint5000alarmTributary7TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990624 truepoint5000alarmTributary8TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990625 truepoint5000alarmTributary9TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990626 truepoint5000alarmTributary10TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990627 truepoint5000alarmTributary11TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990628 truepoint5000alarmTributary12TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990629 truepoint5000alarmTributary13TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990630 truepoint5000alarmTributary14TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990631 truepoint5000alarmTributary15TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990632 truepoint5000alarmTributary16TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990633 truepoint5000alarmTributary17TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990634 truepoint5000alarmTributary18TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990635 truepoint5000alarmTributary19TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990636 truepoint5000alarmTributary20TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990637 truepoint5000alarmTributary21TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990638 truepoint5000alarmTributary22TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990639 truepoint5000alarmTributary23TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990640 truepoint5000alarmTributary24TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990641 truepoint5000alarmTributary25TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990642 truepoint5000alarmTributary26TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990643 truepoint5000alarmTributary27TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990644 truepoint5000alarmTributary28TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990645 truepoint5000alarmTributary1RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990646 truepoint5000alarmTributary2RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990647 truepoint5000alarmTributary3RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990648 truepoint5000alarmTributary4RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990649 truepoint5000alarmTributary5RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990650 truepoint5000alarmTributary6RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990651 truepoint5000alarmTributary7RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990652 truepoint5000alarmTributary8RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990653 truepoint5000alarmTributary9RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990654 truepoint5000alarmTributary10RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990655 truepoint5000alarmTributary11RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990656 truepoint5000alarmTributary12RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990657 truepoint5000alarmTributary13RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990658 truepoint5000alarmTributary14RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990659 truepoint5000alarmTributary15RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990660 truepoint5000alarmTributary16RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990661 truepoint5000alarmTributary17RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990662 truepoint5000alarmTributary18RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990663 truepoint5000alarmTributary19RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990664 truepoint5000alarmTributary20RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990665 truepoint5000alarmTributary21RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990666 truepoint5000alarmTributary22RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990667 truepoint5000alarmTributary23RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990668 truepoint5000alarmTributary24RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990669 truepoint5000alarmTributary25RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990670 truepoint5000alarmTributary26RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990671 truepoint5000alarmTributary27RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990672 truepoint5000alarmTributary28RxOutputFailedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28RxOutputFailedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28RxOutputFailedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990673 truepoint5000alarmOC3STM1TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990674 truepoint5000alarmOC3STM1TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990675 truepoint5000alarmOC3STM1TxInputDegradedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1TxInputDegradedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1TxInputDegradedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990676 truepoint5000alarmE3DS31TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990677 truepoint5000alarmDS32TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990678 truepoint5000alarmDS33TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990679 truepoint5000alarmE3DS31TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990680 truepoint5000alarmDS32TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990681 truepoint5000alarmDS33TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990682 truepoint5000alarmE3DS31TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990683 truepoint5000alarmDS32TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990684 truepoint5000alarmDS33TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990685 truepoint5000alarmE3DS31TxInputOOFMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputOOFMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputOOFMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990686 truepoint5000alarmDS32TxInputOOFMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputOOFMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputOOFMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990687 truepoint5000alarmDS33TxInputOOFMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputOOFMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputOOFMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990688 truepoint5000alarmE3DS31RxOutputFailMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31RxOutputFailMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31RxOutputFailMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990689 truepoint5000alarmDS32RxOutputFailMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32RxOutputFailMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32RxOutputFailMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990690 truepoint5000alarmDS33RxOutputFailMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33RxOutputFailMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33RxOutputFailMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990691 truepoint5000alarmWayside1TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990692 truepoint5000alarmWayside2TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990693 truepoint5000alarmWayside3TxInputAISMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3TxInputAISMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3TxInputAISMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990694 truepoint5000alarmWayside1TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990695 truepoint5000alarmWayside2TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990696 truepoint5000alarmWayside3TxInputLOSMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3TxInputLOSMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3TxInputLOSMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990697 truepoint5000alarmWayside1TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990698 truepoint5000alarmWayside2TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990699 truepoint5000alarmWayside3TxInputCodeErrorMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3TxInputCodeErrorMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3TxInputCodeErrorMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990700 truepoint5000alarmWayside1RxOutputFailMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1RxOutputFailMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1RxOutputFailMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990701 truepoint5000alarmWayside2RxOutputFailMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2RxOutputFailMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2RxOutputFailMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990702 truepoint5000alarmWayside3RxOutputFailMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3RxOutputFailMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3RxOutputFailMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990703 truepoint5000alarmFpgaDownloadMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaDownloadMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaDownloadMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990704 truepoint5000alarmFpgaSettingsMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaSettingsMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaSettingsMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990705 truepoint5000alarmUnknownCardMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmUnknownCardMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmUnknownCardMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990706 truepoint5000alarmFwNotUpgradedMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFwNotUpgradedMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFwNotUpgradedMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990707 truepoint5000alarmReplaceMeMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmReplaceMeMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmReplaceMeMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990708 truepoint5000alarmTxClockInputLossMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxClockInputLossMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxClockInputLossMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990709 truepoint5000alarmTributary1TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990710 truepoint5000alarmTributary2TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990711 truepoint5000alarmTributary3TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990712 truepoint5000alarmTributary4TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990713 truepoint5000alarmTributary5TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990714 truepoint5000alarmTributary6TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990715 truepoint5000alarmTributary7TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990716 truepoint5000alarmTributary8TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990717 truepoint5000alarmTributary9TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990718 truepoint5000alarmTributary10TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990719 truepoint5000alarmTributary11TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990720 truepoint5000alarmTributary12TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990721 truepoint5000alarmTributary13TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990722 truepoint5000alarmTributary14TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990723 truepoint5000alarmTributary15TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990724 truepoint5000alarmTributary16TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990725 truepoint5000alarmTributary17TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990726 truepoint5000alarmTributary18TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990727 truepoint5000alarmTributary19TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990728 truepoint5000alarmTributary20TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990729 truepoint5000alarmTributary21TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990730 truepoint5000alarmTributary22TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990731 truepoint5000alarmTributary23TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990732 truepoint5000alarmTributary24TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990733 truepoint5000alarmTributary25TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990734 truepoint5000alarmTributary26TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990735 truepoint5000alarmTributary27TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990736 truepoint5000alarmTributary28TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990737 truepoint5000alarmTributary1TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990738 truepoint5000alarmTributary2TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990739 truepoint5000alarmTributary3TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990740 truepoint5000alarmTributary4TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990741 truepoint5000alarmTributary5TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990742 truepoint5000alarmTributary6TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990743 truepoint5000alarmTributary7TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990744 truepoint5000alarmTributary8TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990745 truepoint5000alarmTributary9TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990746 truepoint5000alarmTributary10TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990747 truepoint5000alarmTributary11TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990748 truepoint5000alarmTributary12TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990749 truepoint5000alarmTributary13TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990750 truepoint5000alarmTributary14TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990751 truepoint5000alarmTributary15TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990752 truepoint5000alarmTributary16TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990753 truepoint5000alarmTributary17TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990754 truepoint5000alarmTributary18TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990755 truepoint5000alarmTributary19TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990756 truepoint5000alarmTributary20TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990757 truepoint5000alarmTributary21TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990758 truepoint5000alarmTributary22TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990759 truepoint5000alarmTributary23TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990760 truepoint5000alarmTributary24TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990761 truepoint5000alarmTributary25TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990762 truepoint5000alarmTributary26TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990763 truepoint5000alarmTributary27TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990764 truepoint5000alarmTributary28TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990765 truepoint5000alarmTributary1TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990766 truepoint5000alarmTributary2TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990767 truepoint5000alarmTributary3TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990768 truepoint5000alarmTributary4TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990769 truepoint5000alarmTributary5TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990770 truepoint5000alarmTributary6TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990771 truepoint5000alarmTributary7TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990772 truepoint5000alarmTributary8TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990773 truepoint5000alarmTributary9TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990774 truepoint5000alarmTributary10TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990775 truepoint5000alarmTributary11TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990776 truepoint5000alarmTributary12TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990777 truepoint5000alarmTributary13TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990778 truepoint5000alarmTributary14TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990779 truepoint5000alarmTributary15TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990780 truepoint5000alarmTributary16TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990781 truepoint5000alarmTributary17TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990782 truepoint5000alarmTributary18TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990783 truepoint5000alarmTributary19TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990784 truepoint5000alarmTributary20TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990785 truepoint5000alarmTributary21TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990786 truepoint5000alarmTributary22TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990787 truepoint5000alarmTributary23TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990788 truepoint5000alarmTributary24TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990789 truepoint5000alarmTributary25TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990790 truepoint5000alarmTributary26TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990791 truepoint5000alarmTributary27TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990792 truepoint5000alarmTributary28TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990793 truepoint5000alarmTributary1RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990794 truepoint5000alarmTributary2RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990795 truepoint5000alarmTributary3RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990796 truepoint5000alarmTributary4RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990797 truepoint5000alarmTributary5RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990798 truepoint5000alarmTributary6RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990799 truepoint5000alarmTributary7RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990800 truepoint5000alarmTributary8RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990801 truepoint5000alarmTributary9RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990802 truepoint5000alarmTributary10RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990803 truepoint5000alarmTributary11RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990804 truepoint5000alarmTributary12RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990805 truepoint5000alarmTributary13RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990806 truepoint5000alarmTributary14RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990807 truepoint5000alarmTributary15RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990808 truepoint5000alarmTributary16RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990809 truepoint5000alarmTributary17RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990810 truepoint5000alarmTributary18RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990811 truepoint5000alarmTributary19RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990812 truepoint5000alarmTributary20RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990813 truepoint5000alarmTributary21RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990814 truepoint5000alarmTributary22RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990815 truepoint5000alarmTributary23RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990816 truepoint5000alarmTributary24RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990817 truepoint5000alarmTributary25RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990818 truepoint5000alarmTributary26RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990819 truepoint5000alarmTributary27RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990820 truepoint5000alarmTributary28RxOutputFailedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28RxOutputFailedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28RxOutputFailedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990821 truepoint5000alarmOC3STM1TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990822 truepoint5000alarmOC3STM1TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990823 truepoint5000alarmOC3STM1TxInputDegradedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1TxInputDegradedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOC3STM1TxInputDegradedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990824 truepoint5000alarmE3DS31TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990825 truepoint5000alarmDS32TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990826 truepoint5000alarmDS33TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990827 truepoint5000alarmE3DS31TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990828 truepoint5000alarmDS32TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990829 truepoint5000alarmDS33TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990830 truepoint5000alarmE3DS31TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990831 truepoint5000alarmDS32TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990832 truepoint5000alarmDS33TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990833 truepoint5000alarmE3DS31TxInputOOFMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputOOFMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputOOFMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990834 truepoint5000alarmDS32TxInputOOFMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputOOFMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputOOFMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990835 truepoint5000alarmDS33TxInputOOFMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputOOFMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputOOFMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990836 truepoint5000alarmE3DS31RxOutputFailMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31RxOutputFailMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31RxOutputFailMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990837 truepoint5000alarmDS32RxOutputFailMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32RxOutputFailMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32RxOutputFailMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990838 truepoint5000alarmDS33RxOutputFailMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33RxOutputFailMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33RxOutputFailMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990839 truepoint5000alarmWayside1TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990840 truepoint5000alarmWayside2TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990841 truepoint5000alarmWayside3TxInputAISMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3TxInputAISMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3TxInputAISMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990842 truepoint5000alarmWayside1TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990843 truepoint5000alarmWayside2TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990844 truepoint5000alarmWayside3TxInputLOSMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3TxInputLOSMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3TxInputLOSMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990845 truepoint5000alarmWayside1TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990846 truepoint5000alarmWayside2TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990847 truepoint5000alarmWayside3TxInputCodeErrorMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3TxInputCodeErrorMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3TxInputCodeErrorMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990848 truepoint5000alarmWayside1RxOutputFailMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1RxOutputFailMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1RxOutputFailMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990849 truepoint5000alarmWayside2RxOutputFailMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2RxOutputFailMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2RxOutputFailMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990850 truepoint5000alarmWayside3RxOutputFailMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3RxOutputFailMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3RxOutputFailMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990851 truepoint5000alarmFpgaDownloadMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaDownloadMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaDownloadMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990852 truepoint5000alarmFpgaSettingsMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaSettingsMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaSettingsMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990853 truepoint5000alarmUnknownCardMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmUnknownCardMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmUnknownCardMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990854 truepoint5000alarmFwNotUpgradedMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFwNotUpgradedMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFwNotUpgradedMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990855 truepoint5000alarmReplaceMeMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmReplaceMeMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmReplaceMeMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990856 truepoint5000alarmRxEquipmentRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRxEquipmentRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRxEquipmentRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990857 truepoint5000alarmTxEquipmentRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxEquipmentRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxEquipmentRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990858 truepoint5000alarmEepromRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmEepromRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmEepromRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990859 truepoint5000alarmSynthesizerRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSynthesizerRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSynthesizerRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990860 truepoint5000alarmPALowRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmPALowRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmPALowRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990861 truepoint5000alarmPAOuputOutOfRangeRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmPAOuputOutOfRangeRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmPAOuputOutOfRangeRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990862 truepoint5000alarmCalibrationTblMismatchRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmCalibrationTblMismatchRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmCalibrationTblMismatchRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990863 truepoint5000alarmTxSilentFailureRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxSilentFailureRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxSilentFailureRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990864 truepoint5000alarmSwDownloadErrorRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSwDownloadErrorRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSwDownloadErrorRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990865 truepoint5000alarmSettingsRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSettingsRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSettingsRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990866 truepoint5000alarmSwNotUpgradedRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSwNotUpgradedRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSwNotUpgradedRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990867 truepoint5000alarmFailRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFailRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFailRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990868 truepoint5000alarmReplaceMeRfu-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmReplaceMeRfu-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmReplaceMeRfu-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990869 truepoint5000alarmRxEquipmentRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRxEquipmentRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRxEquipmentRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990870 truepoint5000alarmTxEquipmentRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxEquipmentRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxEquipmentRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990871 truepoint5000alarmEepromRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmEepromRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmEepromRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990872 truepoint5000alarmSynthesizerRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSynthesizerRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSynthesizerRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990873 truepoint5000alarmPALowRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmPALowRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmPALowRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990874 truepoint5000alarmPAOuputOutOfRangeRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmPAOuputOutOfRangeRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmPAOuputOutOfRangeRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990875 truepoint5000alarmCalibrationTblMismatchRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmCalibrationTblMismatchRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmCalibrationTblMismatchRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990876 truepoint5000alarmTxSilentFailureRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxSilentFailureRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxSilentFailureRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990877 truepoint5000alarmSwDownloadErrorRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSwDownloadErrorRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSwDownloadErrorRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990878 truepoint5000alarmSettingsRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSettingsRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSettingsRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990879 truepoint5000alarmSwNotUpgradedRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSwNotUpgradedRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSwNotUpgradedRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990880 truepoint5000alarmFailRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFailRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFailRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990881 truepoint5000alarmReplaceMeRfu-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmReplaceMeRfu-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmReplaceMeRfu-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990882 truepoint5000alarmEthernetOver64kPort1LinkTestFailOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmEthernetOver64kPort1LinkTestFailOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmEthernetOver64kPort1LinkTestFailOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990884 truepoint5000alarmEthernetOver64kPort2LinkTestFailOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmEthernetOver64kPort2LinkTestFailOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmEthernetOver64kPort2LinkTestFailOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990885 truepoint5000alarmAISInsertG703V11Opt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAISInsertG703V11Opt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAISInsertG703V11Opt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990886 truepoint5000alarmTxInputLossG703V11Opt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxInputLossG703V11Opt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxInputLossG703V11Opt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990887 truepoint5000alarmFpgaDownloadOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaDownloadOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaDownloadOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990888 truepoint5000alarmFpgaSettingsOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaSettingsOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaSettingsOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990889 truepoint5000alarmUnknownCardOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmUnknownCardOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmUnknownCardOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990890 truepoint5000alarmFwNotUpgradedOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFwNotUpgradedOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFwNotUpgradedOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990891 truepoint5000alarmNotSupportedInSimplexOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmNotSupportedInSimplexOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmNotSupportedInSimplexOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990892 truepoint5000alarmCeTunnelCommFailOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmCeTunnelCommFailOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmCeTunnelCommFailOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990893 truepoint5000alarmCeTunnelConflictOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmCeTunnelConflictOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmCeTunnelConflictOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990894 truepoint5000alarmReplaceMeOpt-1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmReplaceMeOpt-1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmReplaceMeOpt-1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990895 truepoint5000alarmEthernetOver64kPort1LinkTestFailOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmEthernetOver64kPort1LinkTestFailOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmEthernetOver64kPort1LinkTestFailOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990896 truepoint5000alarmEthernetOver64kPort2LinkTestFailOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmEthernetOver64kPort2LinkTestFailOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmEthernetOver64kPort2LinkTestFailOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990897 truepoint5000alarmAISInsertG703V11Opt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmAISInsertG703V11Opt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmAISInsertG703V11Opt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990898 truepoint5000alarmTxInputLossG703V11Opt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTxInputLossG703V11Opt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTxInputLossG703V11Opt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990899 truepoint5000alarmFpgaDownloadOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaDownloadOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaDownloadOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990900 truepoint5000alarmFpgaSettingsOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFpgaSettingsOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFpgaSettingsOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990901 truepoint5000alarmUnknownCardOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmUnknownCardOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmUnknownCardOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990902 truepoint5000alarmFwNotUpgradedOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmFwNotUpgradedOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmFwNotUpgradedOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990903 truepoint5000alarmNotSupportedInSimplexOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmNotSupportedInSimplexOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmNotSupportedInSimplexOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990904 truepoint5000alarmCeTunnelCommFailOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmCeTunnelCommFailOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmCeTunnelCommFailOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990905 truepoint5000alarmCeTunnelConflictOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmCeTunnelConflictOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmCeTunnelConflictOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990906 truepoint5000alarmReplaceMeOpt-2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmReplaceMeOpt-2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmReplaceMeOpt-2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990907 truepoint5000alarmTributary1TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990908 truepoint5000alarmTributary2TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990909 truepoint5000alarmTributary3TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990910 truepoint5000alarmTributary4TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990911 truepoint5000alarmTributary5TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990912 truepoint5000alarmTributary6TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990913 truepoint5000alarmTributary7TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990914 truepoint5000alarmTributary8TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990915 truepoint5000alarmTributary9TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990916 truepoint5000alarmTributary10TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990917 truepoint5000alarmTributary11TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990918 truepoint5000alarmTributary12TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990919 truepoint5000alarmTributary13TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990920 truepoint5000alarmTributary14TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990921 truepoint5000alarmTributary15TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990922 truepoint5000alarmTributary16TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990923 truepoint5000alarmTributary17TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990924 truepoint5000alarmTributary18TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990925 truepoint5000alarmTributary19TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990926 truepoint5000alarmTributary20TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990927 truepoint5000alarmTributary21TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990928 truepoint5000alarmTributary22TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990929 truepoint5000alarmTributary23TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990930 truepoint5000alarmTributary24TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990931 truepoint5000alarmTributary25TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990932 truepoint5000alarmTributary26TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990933 truepoint5000alarmTributary27TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990934 truepoint5000alarmTributary28TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990935 truepoint5000alarmTributary1TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990936 truepoint5000alarmTributary2TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990937 truepoint5000alarmTributary3TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990938 truepoint5000alarmTributary4TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990939 truepoint5000alarmTributary5TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990940 truepoint5000alarmTributary6TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990941 truepoint5000alarmTributary7TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990942 truepoint5000alarmTributary8TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990943 truepoint5000alarmTributary9TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990944 truepoint5000alarmTributary10TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990945 truepoint5000alarmTributary11TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990946 truepoint5000alarmTributary12TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990947 truepoint5000alarmTributary13TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990948 truepoint5000alarmTributary14TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990949 truepoint5000alarmTributary15TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990950 truepoint5000alarmTributary16TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990951 truepoint5000alarmTributary17TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990952 truepoint5000alarmTributary18TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990953 truepoint5000alarmTributary19TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990954 truepoint5000alarmTributary20TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990955 truepoint5000alarmTributary21TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990956 truepoint5000alarmTributary22TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990957 truepoint5000alarmTributary23TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990958 truepoint5000alarmTributary24TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990959 truepoint5000alarmTributary25TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990960 truepoint5000alarmTributary26TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990961 truepoint5000alarmTributary27TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990962 truepoint5000alarmTributary28TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990963 truepoint5000alarmTributary1TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990964 truepoint5000alarmTributary2TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990965 truepoint5000alarmTributary3TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990966 truepoint5000alarmTributary4TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990967 truepoint5000alarmTributary5TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990968 truepoint5000alarmTributary6TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990969 truepoint5000alarmTributary7TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990970 truepoint5000alarmTributary8TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990971 truepoint5000alarmTributary9TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990972 truepoint5000alarmTributary10TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990973 truepoint5000alarmTributary11TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990974 truepoint5000alarmTributary12TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990975 truepoint5000alarmTributary13TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990976 truepoint5000alarmTributary14TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990977 truepoint5000alarmTributary15TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990978 truepoint5000alarmTributary16TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990979 truepoint5000alarmTributary17TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990980 truepoint5000alarmTributary18TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990981 truepoint5000alarmTributary19TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990982 truepoint5000alarmTributary20TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990983 truepoint5000alarmTributary21TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990984 truepoint5000alarmTributary22TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990985 truepoint5000alarmTributary23TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990986 truepoint5000alarmTributary24TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990987 truepoint5000alarmTributary25TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990988 truepoint5000alarmTributary26TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990989 truepoint5000alarmTributary27TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990990 truepoint5000alarmTributary28TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990991 truepoint5000alarmTributary1RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary1RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary1RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990992 truepoint5000alarmTributary2RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary2RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary2RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990993 truepoint5000alarmTributary3RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary3RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary3RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990994 truepoint5000alarmTributary4RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary4RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary4RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990995 truepoint5000alarmTributary5RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary5RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary5RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990996 truepoint5000alarmTributary6RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary6RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary6RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990997 truepoint5000alarmTributary7RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary7RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary7RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990998 truepoint5000alarmTributary8RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary8RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary8RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 990999 truepoint5000alarmTributary9RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary9RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary9RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991000 truepoint5000alarmTributary10RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary10RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary10RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991001 truepoint5000alarmTributary11RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary11RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary11RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991002 truepoint5000alarmTributary12RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary12RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary12RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991003 truepoint5000alarmTributary13RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary13RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary13RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991004 truepoint5000alarmTributary14RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary14RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary14RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991005 truepoint5000alarmTributary15RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary15RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary15RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991006 truepoint5000alarmTributary16RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary16RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary16RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991007 truepoint5000alarmTributary17RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary17RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary17RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991008 truepoint5000alarmTributary18RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary18RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary18RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991009 truepoint5000alarmTributary19RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary19RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary19RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991010 truepoint5000alarmTributary20RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary20RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary20RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991011 truepoint5000alarmTributary21RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary21RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary21RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991012 truepoint5000alarmTributary22RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary22RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary22RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991013 truepoint5000alarmTributary23RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary23RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary23RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991014 truepoint5000alarmTributary24RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary24RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary24RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991015 truepoint5000alarmTributary25RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary25RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary25RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991016 truepoint5000alarmTributary26RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary26RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary26RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991017 truepoint5000alarmTributary27RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary27RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary27RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991018 truepoint5000alarmTributary28RxOutputFailed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTributary28RxOutputFailed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTributary28RxOutputFailed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991019 truepoint5000alarmE3DS31TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991020 truepoint5000alarmDS32TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991021 truepoint5000alarmDS33TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991022 truepoint5000alarmE3DS31TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991023 truepoint5000alarmDS32TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991024 truepoint5000alarmDS33TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991025 truepoint5000alarmE3DS31TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991026 truepoint5000alarmDS32TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991027 truepoint5000alarmDS33TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991028 truepoint5000alarmE3DS31TxInputOOF TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31TxInputOOF } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31TxInputOOF ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991029 truepoint5000alarmDS32TxInputOOF TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32TxInputOOF } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32TxInputOOF ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991030 truepoint5000alarmDS33TxInputOOF TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33TxInputOOF } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33TxInputOOF ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991031 truepoint5000alarmE3DS31RxOutputFail TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmE3DS31RxOutputFail } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmE3DS31RxOutputFail ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991032 truepoint5000alarmDS32RxOutputFail TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS32RxOutputFail } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS32RxOutputFail ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991033 truepoint5000alarmDS33RxOutputFail TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDS33RxOutputFail } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDS33RxOutputFail ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991034 truepoint5000alarmWayside1TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991035 truepoint5000alarmWayside2TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991036 truepoint5000alarmWayside3TxInputAIS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3TxInputAIS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3TxInputAIS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991037 truepoint5000alarmWayside1TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991038 truepoint5000alarmWayside2TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991039 truepoint5000alarmWayside3TxInputLOS TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3TxInputLOS } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3TxInputLOS ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991040 truepoint5000alarmWayside1TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991041 truepoint5000alarmWayside2TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991042 truepoint5000alarmWayside3TxInputCodeError TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3TxInputCodeError } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3TxInputCodeError ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991043 truepoint5000alarmWayside1RxOutputFail TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside1RxOutputFail } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside1RxOutputFail ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991044 truepoint5000alarmWayside2RxOutputFail TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside2RxOutputFail } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside2RxOutputFail ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991045 truepoint5000alarmWayside3RxOutputFail TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWayside3RxOutputFail } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWayside3RxOutputFail ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991046 truepoint5000alarmUnknownCardSdm TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmUnknownCardSdm } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmUnknownCardSdm ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991047 truepoint5000alarmSynthesizerModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSynthesizerModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSynthesizerModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991048 truepoint5000alarmSynthesizerModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmSynthesizerModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmSynthesizerModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991049 truepoint5000alarmModemCablesCrossed TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmModemCablesCrossed } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmModemCablesCrossed ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991050 truepoint5000alarmDemuxSyncLoss-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDemuxSyncLoss-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDemuxSyncLoss-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991051 truepoint5000alarmDemuxSyncLoss-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmDemuxSyncLoss-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmDemuxSyncLoss-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991052 truepoint5000alarmBandwidthNotSupported TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmBandwidthNotSupported } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmBandwidthNotSupported ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991053 truepoint5000alarmRfuMutingForTelemetryFailure-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRfuMutingForTelemetryFailure-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRfuMutingForTelemetryFailure-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991054 truepoint5000alarmRfuMutingForTelemetryFailure-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRfuMutingForTelemetryFailure-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRfuMutingForTelemetryFailure-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991055 truepoint5000alarmWrongOptionModem-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWrongOptionModem-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWrongOptionModem-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991056 truepoint5000alarmWrongOptionModem-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmWrongOptionModem-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmWrongOptionModem-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991057 truepoint5000alarmOC3STM1TxRdiTrib1Mux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1TxRdiTrib1Mux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 truepoint5000alarmOC3STM1TxRdiTrib1Mux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991058 truepoint5000alarmOC3STM1TxRdiTrib1Mux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOC3STM1TxRdiTrib1Mux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 truepoint5000alarmOC3STM1TxRdiTrib1Mux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991059 truepoint5000alarmTimingReferenceRadioMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceRadioMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceRadioMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991060 truepoint5000alarmTimingReferenceRadioMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceRadioMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceRadioMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991061 truepoint5000alarmTimingReferenceInputMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceInputMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceInputMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991062 truepoint5000alarmTimingReferenceInputMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceInputMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceInputMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991063 truepoint5000alarmTimingReferenceSpurMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceSpurMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceSpurMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991064 truepoint5000alarmTimingReferenceSpurMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceSpurMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceSpurMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991065 -- =============== truepoint5000alarmTimingReferencePdhMux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferencePdhMux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferencePdhMux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991066 truepoint5000alarmTimingReferencePdhMux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferencePdhMux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferencePdhMux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991067 truepoint5000alarmTimingReferenceExtClockInput1Mux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceExtClockInput1Mux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceExtClockInput1Mux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991068 truepoint5000alarmTimingReferenceExtClockInput1Mux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceExtClockInput1Mux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceExtClockInput1Mux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991069 truepoint5000alarmTimingReferenceExtClockInput2Mux-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceExtClockInput2Mux-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceExtClockInput2Mux-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991070 truepoint5000alarmTimingReferenceExtClockInput2Mux-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceExtClockInput2Mux-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceExtClockInput2Mux-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991071 truepoint5000alarmRemoteSyncLoss-A TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRemoteSyncLoss-A } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRemoteSyncLoss-A ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991072 truepoint5000alarmRemoteSyncLoss-B TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmRemoteSyncLoss-B } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmRemoteSyncLoss-B ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991073 truepoint5000alarmTimingReferencePdh TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferencePdh } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferencePdh ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991074 truepoint5000alarmTimingReferenceExtClockInput1 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceExtClockInput1 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceExtClockInput1 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991075 truepoint5000alarmTimingReferenceExtClockInput2 TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmTimingReferenceExtClockInput2 } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmTimingReferenceExtClockInput2 ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991076 truepoint5000alarmOptCardConfigurationConflict TRAP-TYPE ENTERPRISE rtp VARIABLES { alarmOptCardConfigurationConflict } DESCRIPTION "This Notification is issued every time the value of the MIB object in the VARIABLES list changed. This Notification can be individually DISABLED or ENABLED using Trap Configuration objects." --#SUMMARY "TRuepoint 5000 alarmOptCardConfigurationConflict ($S): $>0" --#SEVERITY MINOR --#CATEGORY "Error Events" REFERENCE " " ::= 991077 END