STL Application Status Page
Site Type&LSetup(3,"%s",536,B,0,"Studio Encoder");&LSetup(3,"%s",536,B,1,"Transmitter Decoder");&LSetup(3,"%s",536,B,2,"Studio Encoder / Decoder");&LSetup(3,"%s",536,B,3,"Transmitter Encoder / Decoder");
StreamMethodURL/IPPort
Outgoing Stream 1&LSetup(4,"%s",600,S);&LSetup(1,"%u",864,W);
Outgoing Stream 2&LSetup(4,"%s",632,S);&LSetup(1,"%u",866,W);
Outgoing Stream 3&LSetup(4,"%s",664,S);&LSetup(1,"%u",868,W);
Outgoing Stream 4&LSetup(4,"%s",696,S);&LSetup(1,"%u",870,W);
Outgoing Stream 5&LSetup(4,"%s",728,S);&LSetup(1,"%u",872,W);
Outgoing Stream 6&LSetup(4,"%s",760,S);&LSetup(1,"%u",874,W);
Outgoing Stream 7&LSetup(4,"%s",792,S);&LSetup(1,"%u",876,W);
Outgoing Stream 8&LSetup(4,"%s",824,S);&LSetup(1,"%u",878,W);
Incoming Stream&LSetup(4,"%s",890,S);&LSetup(1,"%u",534,W);
Streaming Mode&LSetup(3,"%s",520,B,0,"send always");&LSetup(3,"%s",520,B,1,"send on input1");&LSetup(3,"%s",520,B,2,"send on input2");&LSetup(3,"%s",520,B,3,"send on level");&LSetup(3,"%s",520,B,4,"respond");&LSetup(3,"%s",520,B,5,"never");
Input Trigger Level&LSetup(1,"%u",521,W);
Inactivity Timeout&LSetup(1,"%u",523,W); msecs.
Keep-alive Period&LSetup(3,"%s",529,B,255,"Disabled");&LSetup(3,"%s",529,B, 0,"0 (Passive)");&LSetup(3,"%s",529,B, 5,"50");&LSetup(3,"%s",529,B, 10,"100");&LSetup(3,"%s",529,B, 25,"250");&LSetup(3,"%s",529,B, 50,"500");&LSetup(3,"%s",529,B,100,"1000");&LSetup(3,"%s",529,B,250,"2500");
Buffer level&LSetup(1,"%u",525,W); bytes
Audio 
Encoding Audio Format&LSetup(3,"%s",511,B,0,"G.711 uLaw mono");&LSetup(3,"%s",511,B,1,"G.711 aLaw mono");&LSetup(3,"%s",511,B,2,"PCM 16bit mono big endian");&LSetup(3,"%s",511,B,3,"PCM 16bit mono little endian");&LSetup(3,"%s",511,B,4,"PCM 16bit stereo big endian");&LSetup(3,"%s",511,B,5,"PCM 16bit stereo little endian");&LSetup(3,"%s",511,B,6,"MPEG mono");&LSetup(3,"%s",511,B,7,"MPEG stereo");
Encoding Sample Rate&LSetup(3,"%s",512,B,0,"8 kHz";&LSetup(3,"%s",512,B,1,"12 kHz");&LSetup(3,"%s",512,B,2,"16 kHz");&LSetup(3,"%s",512,B,3,"22.05 kHz");&LSetup(3,"%s",512,B,4,"24 kHz");&LSetup(3,"%s",512,B,5,"32 kHz");&LSetup(3,"%s",512,B,6,"44.1 kHz");&LSetup(3,"%s",512,B,7,"48 kHz");
Encoding Quality (MPEG only)&LSetup(1,"%u",513,B);
Input Source&LSetup(3,"%s",510,B,1, "Analog Line");&LSetup(3,"%s",510,B,9,"AES/EBU");
Input Gain
Output Audio Level
Fading Effect&LSetup(3,"%s",507,B,1,"On");&LSetup(3,"%s",507,B,0,"Off");
I/O and Control 
Front Panel LEDs
Relay 1 Mode
Relay 2 Mode
Relay 3 Mode
Relay 4 Mode
SNMP Destination IP(s)&LSetup(4,"%s",540,S);
SMTP Server IP/DNS&LSetup(4,"%s",1000,S);
Local e-mail (FROM:)&LSetup(4,"%s",1050,S);
Destination e-mail(s) (TO:)&LSetup(4,"%s",1100,S);
Serial 
Serial Port 1, baud rate
Serial Port 1, data bits&LSetup(3,"%s",80,b2-3,2,"7");&LSetup(3,"%s",80,b2-3,3,"8");
Serial Port 1, parity&LSetup(3,"%s",80,b4-5,0,"no");&LSetup(3,"%s",80,b4-5,3,"even");&LSetup(3,"%s",80,b4-5,1,"odd");
Serial Port 1, stop&LSetup(3,"%s",80,b6-7,1,"1");&LSetup(3,"%s",80,b6-7,3,"2");
Serial Port 1, handshake
TCP Port for COM1&LSetup(1,"%d",503,W);
Serial Port 2, baud rate
Serial Port 2, data bits&LSetup(3,"%s",83,b2-3,2,"7");&LSetup(3,"%s",83,b2-3,3,"8");
Serial Port 2, parity&LSetup(3,"%s",83,b4-5,0,"no");&LSetup(3,"%s",83,b4-5,3,"even");&LSetup(3,"%s",83,b4-5,1,"odd");
Serial Port 2, stop&LSetup(3,"%s",83,b6-7,1,"1");&LSetup(3,"%s",83,b6-7,3,"2");
Serial Port 2, handshake
TCP Port for COM2&LSetup(1,"%d",505,W);
RTP Statistics 
Lost Frames&LBAS(1,"%u",rtplo);
Duplicated Frames&LBAS(1,"%u",rtpdu);
Dropped Frames&LBAS(1,"%u",rtpdr);
Latency&LBAS(1,"%u",rtpla); msec
Save this data before contacting Barix support service.