GARMIN GPSCFG Version 3.10

             Owner's Manual Additions/Corrections


     Copyright 1995-2000 GARMIN, 1200 E 151st St, Olathe, KS 66062, USA

         GARMIN Product Support 1-800-800-1020 or 1-913-397-8200.







     All rights reserved.  No part of this file may be reproduced or
     transmitted in any form or by any means, electronic or mechanical,
     including photocopying and recording, for any purpose without the
     express written permission of GARMIN.

     Information in this document is subject to change without notice.
     GARMIN reserves the right to change or improve their products and to
     make changes in the content without obligation to notify any person
     or organization of such changes or improvements.


     April 2000






     1. Introduction

     The configuration program will configure the GPS sensor boards based
     on user selected parameters.  Some program features include the ability
     to download sensor board configuration, maintain different configurations
     in files, and perform  sensor board configurations quickly with the use
     of one function key.  Online program help is available.

     This file contains additions and/or corrections to the Owner's Manual
     that came with your sensor board evaluation software.  Due to the lead
     time necessary for printing a manual, some information about certain
     features of the sensor board evaluation software may not defined at
     press time.


     2. Installation Files

     The sensor board evaluation software setup file installs the following
     files:


        GPSCFG   EXE   Version 3.10
        GPSCFG   HLP
        GPSCFG   ICO
        GPSCFG   TXT
        GPS25PM  EXE   Version 1.03
        GPS25PM  TXT
        GPS25PM  ICO
        NMEAVWR  EXE   Version 1.06
        NMEAVWR  TXT
        NMEAVWR  ICO
        TEXTTYPE ICO


     3. Un-Install

     To un-install the evaluation software, delete the following files
     from the user selected directory (usually C:\GARMIN\SENSORBD):

        GPSCFG   EXE   
        GPSCFG   HLP
        GPSCFG   ICO
        GPSCFG   TXT
        GPS25PM  EXE   
        GPS25PM  TXT
        GPS25PM  ICO
        NMEAVWR  EXE   
        NMEAVWR  TXT
        NMEAVWR  ICO
        TEXTTYPE ICO

     Delete any user configuration files from the user selected
     directory (usually C:\GARMIN\SENSORBD).


     If the directory is empty, it can also be deleted.

     Using the windows program manager, delete the following icons from
     the Garmin Program Group:

        NMEA VWR
        NMEA VWR NOTES
        GPSCFG
        GPSCFG NOTES
        GPS25PM
        GPS25PM NOTES

     If the Garmin Program Group is empty it can also be deleted with the
     Windows Program Manager.

     In the windows subdirectory delete the GPSCFG.INI file.