Magdalena Carranza (@MBARI), Nov 10-2021
Performed a series of bench tests, with instrument lying horizontally on a cart, by the test tank.
SH1 SMC cable was wrapped inside a small ziplog with a dessicant and left overnight.

DAT_016.P: bench test with pressure sensor pointing upward. No improvement.
DAT_017.P: bench test with pressure sensor rotated 90deg counterclockwise (ref, looking into the top/probes).
DAT_018.P: bench test with pressure sensor rotated 90deg clockwise.
DAT_019.P: bench test with pressure sensor rotated 180deg clockwise, i.e. facing downward.

NOTE: orientation of S1 test probe. flat surface facing inward