From: Mark Gilbert [MarkG@foxonline.com]
Sent: Thursday, January 03, 2002 7:14 AM
To: 'lance@mbari.org'
Subject: RE: Thermal coefficients for JITO-2 MIN6 4.000MHz

Lance,

Below is the only information we currently have available for the part you
are asking about:


            SAMPLE                 THETA JA

          1. 1.2MHZ 5V           AROUND 140C/W

          2. 250MHZ 5V           AROUND 100C/W

          3. 250MHZ 3.3V         AROUND 180C/W

 

Maximum junction temperature is 125C.

I hope this was helpful in answering your questions.  Please contact me if I
can assist you in any other way.  Thank you.



Regards,

Mark Gilbert, Product Engineer
FOX Electronics
For Frequency Control Solutions. . . Fast:
1-888-GET2FOX, ext. 2289
Direct Phone: 941-690-2289
Direct Fax: 941-693-3489

http://www.foxonline.com/

-----Original Message-----
From: Receptionist 
Sent: Wednesday, January 02, 2002 1:48 PM
To: Mark Gilbert
Subject: FW: Thermal coefficients for JITO-2 MIN6 4.000MHz


-----Original Message-----
From: McBride, Lance [mailto:lance@mbari.org]
Sent: Wednesday, January 02, 2002 1:47 PM
To: 'tech_support@foxonline.com'
Subject: Thermal coefficients for JITO-2 MIN6 4.000MHz


I need the thermal coefficients for a 4.000MHz JITO-2 in a MIN 6 package. 

What is Theta-JC & Theta-JA?

Thanks.
--
Lance McBride
Electrical Engineer
MBARI
831-775-2046