README_FAB_MAIN.TXT

Monterey Bay Aquarium Research Institute

Date: JANUARY 7, 2002

QUOTE REQUEST

Board name:  Smart Shutter Controller

Board Number: 101357

Contact: Lance McBride
Voice:   831-775-2046
Fax:     831-775-1620
e-mail:  lance@mbari.org
 
Address:   MBARI
	   7700 Sandholdt Rd
	   Moss Landing, CA 95039-9644


Fabrication data included in gerber.ZIP:

shutter.bsm - bottom solder mask
shutter.bss - bottom silk screen
shutter.cmp - top layer (layer 1)
shutter.dim - board dimensions/notes/drill table
shutter.drd - excellon drill file
shutter.dri - excellon drill station info file
shutter.dril - gerber drill file
shutter.drl - excellon drill rack
shutter.glc - top glue 
shutter.gls - bottom glue
shutter.gpi - photoplotter information file
shutter.psc - top paste
shutter.pss - bottom paste
shutter.rt2 - inner layer (layer 2)
shutter.rt3 - inner layer (layer 3)
shutter.sol - bottom layer (layer 4)
shutter.tsm - top solder mask
shutter.tss - top silk screen

Notes:

1. layer 1 is impedance controlled at 50ohms.  This requires a 0.031" thick board.
    
Overall Dimensions:  2.875" diam

Number of layers:  4

.062" nominal PWB thickness, FR4 material

1/2oz. copper layers 1 & 4
1 oz. copper layers 2 & 3

Blue soldermask over bare copper, 2 sides

White silkscreen, top and bottom.

Minimum air gap:  7 mil

Minimum line width:  7 mil

Minimum hole size: 16 mil

Finished hole sizes are dimensions  +/-.003

Lead time:  1 wk.

Qty SMD pads bottom: 108

Qty SMD pads top: 205

SMD pitch: 50 mil

CNC route points: circular

Scoring: no

Quantities:  10

Special Needs: 

* Electrical test required

* 2X check plots requested





 
