1002055 rev B notes:

1)	Make support pins on J6 Samtec connector plated through.
2)	R29 is missing from and not accounted for in Luke's revision document.
3)	Original U21 footprint (3.3V supply) traces were setup for much more current.  New footprint looks like a "light-weight"
4)	Remove "Fuse" gap in order to create more board space.
5)	Current footprint for Q3, 7,9,11,12 (BSS84LT1) IS TSOT-132.  Correct footprint should be... (TSOT 132) 1g,2s,3d.
6)	U21.8 input voltage line... Make it thicker.  Also goes to U18 and U19.