G04 ================== begin FILE IDENTIFICATION RECORD ==================*
G04 Layout Name:  arduino_conn_adapt.brd*
G04 Film Name:    10020873_SSBOT*
G04 File Format:  Gerber RS274X*
G04 File Origin:  Cadence Allegro 16.5-S022*
G04 Origin Date:  Thu Jul 19 09:51:04 2012*
G04 *
G04 Layer:  REF DES/SILKSCREEN_BOTTOM*
G04 Layer:  PACKAGE GEOMETRY/SILKSCREEN_BOTTOM*
G04 Layer:  BOARD GEOMETRY/OUTLINE*
G04 Layer:  BOARD GEOMETRY/SILKSCREEN_BOTTOM*
G04 *
G04 Offset:    (0.00 0.00)*
G04 Mirror:    No*
G04 Mode:      Positive*
G04 Rotation:  0*
G04 FullContactRelief:  No*
G04 UndefLineWidth:     0.00*
G04 ================== end FILE IDENTIFICATION RECORD ====================*
%FSLAX25Y25*MOIN*%
%IR0*IPPOS*OFA0.00000B0.00000*MIA0B0*SFA1.00000B1.00000*%
%ADD10C,.001*%
%ADD11C,.006*%
G75*
%LPD*%
G75*
G54D10*
G01X0Y0D02*
X315000D01*
Y190000D01*
X281000D01*
X0Y80000D01*
Y0D01*
G54D11*
G01X42125Y7660D02*
X41733Y7030D01*
X41263Y6610D01*
X40715Y6400D01*
X40088Y6610D01*
X39618Y7030D01*
X39148Y7660D01*
X38991Y8500D01*
Y12700D01*
G01X34258Y6400D02*
Y12700D01*
X35198Y11440D01*
G01Y6400D02*
X33318D01*
M02*