\t (00:00:01) allegro 16.3 S021 (v16-3-85BG) i86
\t (00:00:01) 

\t (00:00:03) Starting new drawing...
\i (00:00:03) trapsize 468
\i (00:00:03) trapsize 462
\i (00:00:03) trapsize 459
\i (00:00:04) trapsize 625
\i (00:00:04) replay soic254p916x380-6n.scr 
\f (00:00:04) Select Script to Replay
\i (00:00:04) version 16.2 
\t (00:00:04) Script version: 16.2
\i (00:00:04) setwindow pcb 
\i (00:00:04) new 
\i (00:00:04) newdrawfillin soic254p916x380-6n.dra 'Package Symbol' 
\t (00:00:04) Starting new drawing...
\i (00:00:05) trapsize 625
\i (00:00:05) trapsize 625
\i (00:00:05) setwindow Form.vf_vis 
\i (00:00:05) FORM vf_vis 1 all_colorvisible YES 
\i (00:00:05) FORM vf_vis 2 all_colorvisible YES 
\i (00:00:05) setwindow pcb 
\i (00:00:05) Color 
\i (00:00:05) FORM cvf_main class_list Geometry
\i (00:00:05) setwindow Form.cvf_main 
\i (00:00:05) FORM cvf_main class_list Components 
\i (00:00:05) FORM cvf_main all_visible1 YES 
\i (00:00:05) FORM cvf_main all_visible2 YES 
\i (00:00:05) FORM cvf_main all_visible3 YES 
\i (00:00:05) FORM cvf_main class_list Geometry 
\i (00:00:06) FORM cvf_main all_visible5 YES 
\i (00:00:06) FORM cvf_main package_geometry/pin_number/visible NO 
\i (00:00:06) FORM cvf_main class_list Stack-Up 
\i (00:00:06) FORM cvf_main all_visible1 YES 
\i (00:00:06) FORM cvf_main ok 
\i (00:00:06) generaledit 
\i (00:00:06) prmed 
\i (00:00:06) setwindow Form.prmedit 
\i (00:00:06) FORM prmedit design 
\i (00:00:07) FORM prmedit units Millimeter 
\e (00:00:07) Change may cause round-off; run dbcheck.
\i (00:00:07) FORM prmedit accuracy 4 
\i (00:00:07) FORM prmedit size Other 
\i (00:00:07) FORM prmedit width 21.2 
\i (00:00:07) FORM prmedit height 19.4 
\i (00:00:07) FORM prmedit x 0 
\i (00:00:07) FORM prmedit y 0 
\i (00:00:07) FORM prmedit move_x 10.6 
\i (00:00:07) FORM prmedit move_y 9.7 
\i (00:00:07) FORM prmedit done 
\w (00:00:07) WARNING(SPMHUT-48): Scaled value has been rounded off.
\w (00:00:07) WARNING(SPMHDB-63): Small extents ... sector size decreased to: 12933,12933
\i (00:00:07) trapsize 714
\t (00:00:07) Performing DRC...
\t (00:00:07) No DRC errors detected.
\i (00:00:07) setwindow pcb 
\i (00:00:07) add pin 
\i (00:00:07) setwindow Form.mini 
\i (00:00:07) FORM mini pad_name r205_185 
\t (00:00:07) Using 'R205_185.pad'.
\i (00:00:07) FORM mini next_pin_number 1 
\i (00:00:07) rotate 
\t (00:00:07) Spin the element(s).
\i (00:00:07) iangle 0 
\t (00:00:07) last angle:  +0.000 Degrees
\t (00:00:07) Pin rotated by '0.000' degrees.
\t (00:00:07) Using 'R205_185.pad'.
\i (00:00:07) FORM mini pin_type_mechanical NO 
\e (00:00:07) Form field label not found
\i (00:00:07) FORM mini offsetx 0 
\i (00:00:07) FORM mini offsety 0 
\i (00:00:07) setwindow pcb 
\i (00:00:07) pick -4.3 2.54 
\t (00:00:07) last pick:  -4.3000  2.5400
\t (00:00:07) Using 'R205_185.pad'.
\i (00:00:08) pick -4.3 0 
\t (00:00:08) last pick:  -4.3000  0.0000
\t (00:00:08) Using 'R205_185.pad'.
\i (00:00:08) pick -4.3 -2.54 
\t (00:00:08) last pick:  -4.3000  -2.5400
\t (00:00:08) Using 'R205_185.pad'.
\i (00:00:08) pick 4.3 -2.54 
\t (00:00:08) last pick:  4.3000  -2.5400
\t (00:00:08) Using 'R205_185.pad'.
\i (00:00:08) pick 4.3 0 
\t (00:00:08) last pick:  4.3000  0.0000
\t (00:00:08) Using 'R205_185.pad'.
\i (00:00:08) pick 4.3 2.54 
\t (00:00:08) last pick:  4.3000  2.5400
\t (00:00:08) Using 'R205_185.pad'.
\i (00:00:08) done 
\t (00:00:08) Exiting from Add Pin.
\i (00:00:08) add line 
\i (00:00:08) setwindow Form.mini 
\i (00:00:08) FORM mini class PACKAGE GEOMETRY 
\i (00:00:08) FORM mini subclass DISPLAY_TOP 
\i (00:00:08) FORM mini line_width 0.001 
\i (00:00:08) setwindow pcb 
\i (00:00:08) pick -3.3 -4.445 
\t (00:00:08) last pick:  -3.3000  -4.4450
\i (00:00:08) pick -3.3 4.445 
\t (00:00:08) last pick:  -3.3000  4.4450
\i (00:00:08) pick 3.3 4.445 
\t (00:00:08) last pick:  3.3000  4.4450
\i (00:00:08) pick 3.3 -4.445 
\t (00:00:08) last pick:  3.3000  -4.4450
\i (00:00:08) pick -3.3 -4.445 
\t (00:00:08) last pick:  -3.3000  -4.4450
\i (00:00:08) done 
\i (00:00:08) shape add 
\i (00:00:09) setwindow Form.mini 
\i (00:00:09) FORM mini class PACKAGE GEOMETRY 
\i (00:00:09) FORM mini subclass DFA_BOUND_TOP 
\i (00:00:09) FORM mini dyns_fill_type Static solid 
\i (00:00:09) FORM mini dyns_grid None 
\i (00:00:09) FORM mini dyns_lock_mode Line 
\i (00:00:09) setwindow pcb 
\i (00:00:09) pick -5.6 -4.7 
\t (00:00:09) last pick:  -5.6000  -4.7000
\i (00:00:09) pick -5.6 4.7 
\t (00:00:09) last pick:  -5.6000  4.7000
\i (00:00:09) pick 5.6 4.7 
\t (00:00:09) last pick:  5.6000  4.7000
\i (00:00:09) pick 5.6 -4.7 
\t (00:00:09) last pick:  5.6000  -4.7000
\i (00:00:09) pick -5.6 -4.7 
\t (00:00:09) last pick:  -5.6000  -4.7000
\i (00:00:09) done 
\i (00:00:09) shape add 
\i (00:00:09) setwindow Form.mini 
\i (00:00:09) FORM mini class PACKAGE GEOMETRY 
\i (00:00:09) FORM mini subclass PLACE_BOUND_TOP 
\i (00:00:09) FORM mini dyns_fill_type Static solid 
\i (00:00:09) FORM mini dyns_grid None 
\i (00:00:09) FORM mini dyns_lock_mode Line 
\i (00:00:09) setwindow pcb 
\i (00:00:09) pick -5.6 -4.7 
\t (00:00:09) last pick:  -5.6000  -4.7000
\i (00:00:09) pick -5.6 4.7 
\t (00:00:09) last pick:  -5.6000  4.7000
\i (00:00:09) pick 5.6 4.7 
\t (00:00:09) last pick:  5.6000  4.7000
\i (00:00:09) pick 5.6 -4.7 
\t (00:00:09) last pick:  5.6000  -4.7000
\i (00:00:09) pick -5.6 -4.7 
\t (00:00:09) last pick:  -5.6000  -4.7000
\i (00:00:09) done 
\i (00:00:10) add circle 
\t (00:00:10) Pick center point of the circle.
\i (00:00:10) setwindow Form.mini 
\i (00:00:10) FORM mini class PACKAGE GEOMETRY 
\i (00:00:10) FORM mini subclass PLACE_BOUND_TOP 
\i (00:00:10) FORM mini line_width 0.05 
\i (00:00:10) setwindow pcb 
\i (00:00:10) pick 0 0 
\t (00:00:10) last pick:  0.0000  0.0000
\t (00:00:10) Pick a perimeter point on the circle.
\i (00:00:10) pick 0.35 0 
\t (00:00:10) last pick:  0.3500  0.0000
\t (00:00:10) Pick center point of the circle.
\i (00:00:10) done 
\i (00:00:10) add line 
\i (00:00:10) setwindow Form.mini 
\i (00:00:10) FORM mini class PACKAGE GEOMETRY 
\i (00:00:10) FORM mini subclass PLACE_BOUND_TOP 
\i (00:00:10) FORM mini line_width 0.05 
\i (00:00:10) setwindow pcb 
\i (00:00:10) pick 0 -0.5 
\t (00:00:10) last pick:  0.0000  -0.5000
\i (00:00:10) pick 0 0.5 
\t (00:00:10) last pick:  0.0000  0.5000
\i (00:00:10) done 
\i (00:00:10) add line 
\i (00:00:11) setwindow Form.mini 
\i (00:00:11) FORM mini class PACKAGE GEOMETRY 
\i (00:00:11) FORM mini subclass PLACE_BOUND_TOP 
\i (00:00:11) FORM mini line_width 0.05 
\i (00:00:11) setwindow pcb 
\i (00:00:11) pick -0.5 0 
\t (00:00:11) last pick:  -0.5000  0.0000
\i (00:00:11) pick 0.5 0 
\t (00:00:11) last pick:  0.5000  0.0000
\i (00:00:11) done 
\i (00:00:11) add circle 
\t (00:00:11) Pick center point of the circle.
\i (00:00:11) setwindow Form.mini 
\i (00:00:11) FORM mini class PACKAGE GEOMETRY 
\i (00:00:11) FORM mini subclass ASSEMBLY_TOP 
\i (00:00:11) FORM mini line_width 0.1 
\i (00:00:11) setwindow pcb 
\i (00:00:11) pick -2.175 3.255 
\t (00:00:11) last pick:  -2.1750  3.2550
\t (00:00:11) Pick a perimeter point on the circle.
\i (00:00:11) pick -1.675 3.255 
\t (00:00:11) last pick:  -1.6750  3.2550
\t (00:00:11) Pick center point of the circle.
\i (00:00:11) done 
\i (00:00:11) add line 
\i (00:00:12) setwindow Form.mini 
\i (00:00:12) FORM mini class PACKAGE GEOMETRY 
\i (00:00:12) FORM mini subclass ASSEMBLY_TOP 
\i (00:00:12) FORM mini line_width 0.1 
\i (00:00:12) setwindow pcb 
\i (00:00:12) pick -3.175 -4.255 
\t (00:00:12) last pick:  -3.1750  -4.2550
\i (00:00:12) pick -3.175 4.255 
\t (00:00:12) last pick:  -3.1750  4.2550
\i (00:00:12) pick 3.175 4.255 
\t (00:00:12) last pick:  3.1750  4.2550
\i (00:00:12) pick 3.175 -4.255 
\t (00:00:12) last pick:  3.1750  -4.2550
\i (00:00:12) pick -3.175 -4.255 
\t (00:00:12) last pick:  -3.1750  -4.2550
\i (00:00:12) done 
\i (00:00:12) add line 
\i (00:00:12) setwindow Form.mini 
\i (00:00:12) FORM mini class PACKAGE GEOMETRY 
\i (00:00:12) FORM mini subclass SILKSCREEN_TOP 
\i (00:00:12) FORM mini line_width 0.2 
\i (00:00:12) setwindow pcb 
\i (00:00:12) pick -2.95 -4.25 
\t (00:00:12) last pick:  -2.9500  -4.2500
\i (00:00:12) pick -2.95 4.25 
\t (00:00:12) last pick:  -2.9500  4.2500
\i (00:00:12) pick 2.95 4.25 
\t (00:00:12) last pick:  2.9500  4.2500
\i (00:00:12) pick 2.95 -4.25 
\t (00:00:12) last pick:  2.9500  -4.2500
\i (00:00:12) pick -2.95 -4.25 
\t (00:00:12) last pick:  -2.9500  -4.2500
\i (00:00:12) done 
\i (00:00:12) add circle 
\t (00:00:12) Pick center point of the circle.
\i (00:00:12) setwindow Form.mini 
\i (00:00:12) FORM mini class PACKAGE GEOMETRY 
\i (00:00:12) FORM mini subclass SILKSCREEN_TOP 
\i (00:00:12) FORM mini line_width 0.5 
\i (00:00:12) setwindow pcb 
\i (00:00:12) pick -1.95 3.25 
\t (00:00:12) last pick:  -1.9500  3.2500
\t (00:00:12) Pick a perimeter point on the circle.
\i (00:00:12) pick -1.7 3.25 
\t (00:00:12) last pick:  -1.7000  3.2500
\t (00:00:12) Pick center point of the circle.
\i (00:00:12) done 
\i (00:00:13) add circle 
\t (00:00:13) Pick center point of the circle.
\i (00:00:13) setwindow Form.mini 
\i (00:00:13) FORM mini class PACKAGE GEOMETRY 
\i (00:00:13) FORM mini subclass SILKSCREEN_TOP 
\i (00:00:13) FORM mini line_width 0.25 
\i (00:00:13) setwindow pcb 
\i (00:00:13) pick -5.05 4 
\t (00:00:13) last pick:  -5.0500  4.0000
\t (00:00:13) Pick a perimeter point on the circle.
\i (00:00:13) pick -4.925 4 
\t (00:00:13) last pick:  -4.9250  4.0000
\t (00:00:13) Pick center point of the circle.
\i (00:00:13) done 
\i (00:00:13) setwindow pcb 
\i (00:00:13) package_height 
\i (00:00:13) pick grid 0 0 
\t (00:00:13) last pick:  0.0000  0.0000
\i (00:00:13) setwindow Form.mini 
\i (00:00:13) FORM mini height_max 3.8mm 
\i (00:00:13) done 
\e (00:00:13) Form field label not found
\i (00:00:13) Label refdes 
\t (00:00:14) Pick text location.
\i (00:00:14) setwindow Form.mini 
\i (00:00:14) FORM mini text_block 3 
\i (00:00:14) FORM mini angle 90 
\i (00:00:14) FORM mini mirror NO 
\i (00:00:14) FORM mini text_justification Center 
\i (00:00:14) FORM mini class REF DES 
\i (00:00:14) FORM mini subclass ASSEMBLY_TOP 
\i (00:00:14) setwindow pcb 
\i (00:00:14) pick 0 0.75 
\t (00:00:14) last pick:  0.0000  0.7500
\t (00:00:14) Enter text string.
\i (00:00:14) Text REF 
\i (00:00:14) done 
\i (00:00:14) setwindow pcb 
\i (00:00:14) Label refdes 
\t (00:00:14) Pick text location.
\i (00:00:14) setwindow Form.mini 
\i (00:00:14) FORM mini text_block 3 
\i (00:00:14) FORM mini angle 90 
\i (00:00:14) FORM mini mirror NO 
\i (00:00:14) FORM mini text_justification Center 
\i (00:00:14) FORM mini class REF DES 
\i (00:00:14) FORM mini subclass SILKSCREEN_TOP 
\i (00:00:14) setwindow pcb 
\i (00:00:14) pick 0 0.75 
\t (00:00:14) last pick:  0.0000  0.7500
\t (00:00:14) Enter text string.
\i (00:00:14) Text REF 
\i (00:00:14) done 
\i (00:00:14) setwindow pcb 
\i (00:00:14) Label device 
\t (00:00:14) Pick text location.
\i (00:00:14) setwindow Form.mini 
\i (00:00:14) FORM mini text_block 3 
\i (00:00:14) FORM mini angle 90 
\i (00:00:14) FORM mini mirror NO 
\i (00:00:14) FORM mini text_justification Center 
\i (00:00:14) FORM mini class DEVICE TYPE 
\i (00:00:14) FORM mini subclass SILKSCREEN_TOP 
\i (00:00:14) setwindow pcb 
\i (00:00:14) pick 0 0.75 
\t (00:00:14) last pick:  0.0000  0.7500
\t (00:00:14) Enter text string.
\i (00:00:14) Text DEV 
\t (00:00:14) Enter text string.
\i (00:00:14) done 
\i (00:00:15) setwindow pcb 
\i (00:00:15) save 
\t (00:00:15) Symbol 'soic254p916x380-6n.psm' created.
\i (00:00:15) exit