; Renishaw Productivity+ Custom Macro
; Do NOT remove the preceeding line or this macro will not load
; Definition File for TS27/R Contact Toolsetting Tool Length/Diameter Setting
; Version: 0.01.

[FileType]
; Do NOT remove this section or this Custom Macro will not load
Product		Renishaw Productivity+
File		Custom Macro
Version		0.07.002

[MachineType]
MACHINETYPE Siemens

[Toolsetting Type]
"Contact"

; Definition File Language - language of displayable text strings in this file
[Language]
English

; Existing Menu Item in application that Custom Macro name and its Parent Menu are to appear under
; FIELD CAN BE OMITTED
[Existing Menu]
"Tool setting"

; Parent Menu - used as parent menu item text 
; FIELD CAN BE OMITTED
[Parent Menu]
"Contact (TS27R, TS20, OTS...)"

; Custom Macro Name - used as menu item text. ID MUST BE UNIQUE FOR EACH CUSTOM MACRO!
; FIELD IS COMPULSORY
[Custom Macro]
; Name										ID
"Broken Tool - Length (Siemens)"			48831

; This field specifies the default name given to a statement of this type
; The name must NOT include any of the following characters and cannot start with a numeric character
; {}[]/\:<>@~#-=+()*&^%$£!"`¬|;,.'?
[Default Statement Name]
"Broken_Tool_Length"

; Name or Program Number of macro
[MacroID]
921

; Properties - Do not use IDs 1-19
; Name										ID	Datatype	Default		Range		Category	Output Parameter	Metafile ID (optional)	Help Text			
[Properties]
"Controller Type"							50	CNC_TYPE	0			{NA}		100				-					12050				"Type of target controller"
"Measurement Type (R00)"					20	MEAS_TYPE	6			{NA}		100				CM_AA				12050				"Type of Measurement to perform."

"Tolerance (R04)"							22	LINEAR		0.5			{NA}		100				CM_I				12050				"Tolerance value that defines when the tool length is out of tolerance."

"Write To Broken Tool Flag R13 (R05)"		23	YESNO		NO			{NA}		100				-					12050				"Setting this value to 'Yes' will include a broken tool flag (R13)"
"Broken Tool Flag (R05)"					24	INT			0			{NA}		100				CM_J				12050				"Setting this variable (R05) to any value will enable the setting of error flag R13."

"Include Nominal Tool Diameter (R03)"		32	YESNO		NO			{NA}		100				-					12050				"Set this value to 'Yes' to specify a Cutter Diameter. Setting this value will offset the tool on the datum stylus and cause tool rotation."
"Cutter Diameter (R03)"						33	LINEAR		0			{NA}		100				CM_C				12050				"Cutter Diameter. Use a positive value for right-handed cutting tools and a negative value for left-handed tools."

;	"Use Current Tool Change ID (R01)"		27	YESNO		YES			{NA}		100				-					12050				"When this value is set to 'Yes' the current tool change ID is used as the Length Offset Number. When set to 'No' you can specfy a Length Offset number."
;	"Tool Offset Edge (R01)"				28	LINEAR		0			GT0:LE999	100				CM_SPECIAL_T		12050				"Length Offset Number. This is the offset location in which the measured tool length is stored."

"Use Default Overtravel Distance (R09)"		29	YESNO		YES			{NA}		100				-					12050				"Use the toolsetting macro's default value for Length Overtravel. Set this value to 'No' to specify a custom Length Overtravel."
"Overtravel Distance (R09)"					30	LINEAR		4.0			{NA}		100				CM_F				12050				"Length Overtravel"

"Change Spindle Rotation Direction (R10)"	34	YESNO		NO			{NA}		100				-					12050				"Set this value to 'Yes' to specify spindle rotation direction."
"Spindle Rotation Direction (R10)"			35	INT			0			GE0:LE1		100				CM_G				12050				"Spindle rotation direction. Set to '0' for left-handed cutting tools and set to '1' for right-handed tools.


[Visibility]
PROPERTIES	24
CTRL_PROPS		23 ("Write To Broken Tool Flag R13")
CTRL_VALUES		2 ("YES")

PROPERTIES	33
CTRL_PROPS		32 ("Include Nominal Tool Diameter (R03)")
CTRL_VALUES		2 ("YES")

PROPERTIES	30
CTRL_PROPS		29 ("Use Default Overtravel Distance (R09)")
CTRL_VALUES		1 ("NO")

;	PROPERTIES	28
;	CTRL_PROPS		27 ("Use Current Tool Change ID (R01)")
;	CTRL_VALUES		1 ("NO")

PROPERTIES	35
CTRL_PROPS		34 ("Change Spindle Rotation Direction (R10)")
CTRL_VALUES		2 ("YES")

[Enums]
; N.B. When post processing, the selected enum item ID will be outputted with the Output Parameter.
;	e.g.	enum type			: YESNO
;			selected enum item	: YES
;			enum item value		: 1
;			Output Parameter	: CM_B
;			Output				= B1
;												ID		Index (order in which they will appear)
ENUM_NAME		MEAS_TYPE						
ENUM_ITEM		"Broken Tool Length"			6		0

ENUM_NAME		CNC_TYPE						
ENUM_ITEM		"Siemens"						0		0


[Categories]
; Name							ID
"Nominals"						100

[Resources]
; Path and File name of resource DLL containing metafiles (optional)
PP_tsToolSettingRes.dll

; The post processor section to call when post processing occurs
[Post Section]
TOOLSETTING_CUSTOM_MACRO_CONTACT_TOOL_CHANGE