| Datum | 20.05.2016 - 13:20:31 |
| MC-Dateiname | T12.mcx-9 |
| Voller MC-Dateiname | C:\Users\Public\Documents\schulung\T12\T12.mcx-9 |
| Maschine | C30_V9.mmd-9 |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:16 | |||||||
 |
10 | Endmill1 Flat | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -0.01 |
 |
11 | Drill | 45/64 DRILL VPH-DGS | 0.7031 | 3.0 | 2.0 | -2.3 |
 |
13 | Endmill1 Flat | 1/2 FLAT ENDMILL 5 FLUTE | 0.5 | 3.0 | 1.0 | -1.2 |
 |
14 | Thread | Thread Mill - 0.495 | 0.495 | 3.0 | 0.375 | -1.2 |
 |
15 | CSink | 1.25 X 90 DEG. C,SINK | 1.25 | 2.0 | 1.0 | -0.39 |
 |
16 | Drill | 25/64 DRILL CARBIDE | 0.3906 | 3.0 | 2.0 | -2.25 |
 |
17 | Undefined | SAE#4 PORT TOOL | 0.39 | 2.0 | 0.61 | -0.62 |
 |
18 | Tap RH | 7/16-20 TAPRH | 0.4375 | 2.6875 | 1.375 | -0.5 |