| Datum | 18.07.2018 - 14:27:46 |
| MC-Dateiname | Bohrplatte.mcam |
| Voller MC-Dateiname | C:\Users\GMCCS\Desktop\Bohrplatte.mcam |
| Maschine | TNC530i_new.mcam-mmd |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:14 | |||||||
 |
1 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -0.53 |
 |
2 | Roundover | 1/8 CARB CORNER E.M. | 0.117 | 2.0 | 0.75 | -0.125 |
 |
3 | Drill | NO. 3 DRILL | 0.213 | 3.0 | 2.0 | -0.6 |
 |
4 | Right-hand tap | 1/4-20 TAPRH | 0.25 | 1.5 | 0.75 | -0.6 |