| Datum | 20.05.2016 - 13:20:31 |
| MC-Dateiname | T12.mcx-9 |
| Voller MC-Dateiname | C:\Users\Public\Documents\schulung\T12\T12.mcx-9 |
| Maschine | C30_V9.mmd-9 |
| Material | STEEL inch - 1030 - 200 BHN |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:05:58 | |||||||
 |
1 | General Turning Tool | OD ROUGH RIGHT - 80 DEG. | 0.0313 | -0.7911 | ||
 |
3 | Drilling Tool | DRILL .970 DIA. | 0.97 | -1.25 | ||
 |
6 | Grooving Tool | OD GROOVE RIGHT - .094 WIDE | 0.004 | -0.3981 | ||
 |
8 | Boring Bar | ID ROUGH MIN. .5 DIA. - 75 DEG. | 0.0313 | -1.0156 | ||
 |
9 | Grooving Tool | ID GROOVE - MIN. 1.0 DIA. | 0.01 | -0.4495 | ||
 |
10 | Grooving Tool | FACE GROOVE RIGHT - NARROW | 0.004 | -0.6951 | ||