| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:18:49 | |||||||
 |
1 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -1.65 |
 |
2 | Flat endmill | 1/4 FLAT ENDMILL | 0.25 | 2.5 | 0.5 | -1.65 |
 |
3 | Flat endmill | 1/4 STUBBY ENDMILL | 0.25 | 2.5 | 0.5 | -0.716 |
 |
4 | Drill | 3/32 DRILL CARBIDE | 0.0938 | 2.0 | 1.0 | -1.05 |
 |
5 | Right-hand tap | NO. 4-40 Ti TAPRH | 0.112 | 3.0 | 2.0 | -0.93 |
 |
6 | Chamfer mill | 1/8 CHAMFER MILL | 0.125 | 2.0 | 1.0 | -0.625 |