| Datum | 18.07.2018 - 14:27:46 |
| MC-Dateiname | Bohrplatte.mcam |
| Voller MC-Dateiname | C:\Users\GMCCS\Desktop\Bohrplatte.mcam |
| Maschine | TNC530i_new.mcam-mmd |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:01:28 | |||||||
 |
1 | Drill | 45/64 DRILL VPH-GDS | 0.7031 | 3.0 | 2.0 | -2.1625 |
 |
2 | Flat endmill | 5/8 ENDMILL DATAFLUTE SS30625C4 | 0.625 | 3.75 | 1.5 | -1.85 |
 |
6 | Flat endmill | 1/4 FLAT ENDMILL SGS | 0.25 | 2.5 | 0.5 | -0.2375 |
 |
7 | Chamfer mill | 1/2 CARB CHAMFERMILL | 0.5 | 2.0 | 1.0 | -0.2675 |
 |
8 | Drill | NO. 19 DRILL VPH-GDS | 0.166 | 3.0 | 2.0 | -0.825 |
 |
9 | Right-hand tap | NO. 10-32 TAP FOR TITANIUM | 0.19 | 3.0 | 2.0 | -0.6 |
 |
10 | Flat endmill | 1/2 FLAT ENDMILL SGS | 0.5 | 3.0 | 1.0 | -0.231 |