| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:01:56 | |||||||
 |
1 | Drill | 5/8 DRILL | 0.625 | 3.0 | 2.0 | -1.75 |
 |
2 | Drill | NO. 39 DRILL | 0.0995 | 2.0 | 1.0 | -0.27 |
 |
3 | Right-hand tap | NO. 4-40 ROLL TAP RH | 0.112 | 3.0 | 2.0 | -0.18 |
 |
4 | Roundover | 0.031 Corner Rounder Tool | 0.108 | 2.0 | 0.031 | -0.031 |
 |
5 | Taper mill | 3/8 X 20 DEG ENDMILL | 0.06 | 2.0 | 0.437 | -0.075 |
 |
25 | Flat endmill | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -0.4 |