| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:02:42 | |||||||
 |
1 | Flat endmill | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -0.52 |
 |
2 | Roundover | .031 Carb Radius E.M. | 0.05 | 1.5 | 0.033 | -0.033 |
 |
3 | Drill | NO. 25 DRILL VPH GDR | 0.1495 | 3.0 | 2.0 | -0.58 |
 |
4 | Countersink | 1.00 X 90 DEG. C,SINK CARBIDE | 1.0 | 2.0 | 1.0 | -0.225 |
 |
5 | Drill | 25/64 DRILL CARBIDE | 0.3906 | 3.0 | 2.0 | -1.1 |
 |
6 | Undefined | TM-437-20X THREADMILL | 0.335 | 2.0 | 1.0 | -0.9 |
 |
7 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -0.005 |