| Tl BMP | Tl # | Tl type | Tl name | Z-Min | Cycle time | Holder (old) |
|---|---|---|---|---|---|---|
| 0:00:08 | ||||||
 |
1 | Drill | NO. 2 DRILL | -0.42 | 0:00:08 | |
 |
2 | Drill | 1/8 DRILL | -0.42 | 0:00:16 | |
 |
3 | Drill | 33/64 DRILL | -0.5 | 0:00:04 | |
 |
4 | Drill | NO. 29 DRILL | -0.53 | 0:00:23 | |
 |
5 | Tap RH | NO. 8-32 TAPRH | -0.45 | 0:00:14 | |
 |
6 | Drill | NO. 36 DRILL | -0.52 | 0:00:25 | |
 |
7 | Tap RH | NO. 6-32 TAPRH | -0.45 | 0:00:19 | |
 |
8 | Drill | NO. 12 DRILL | -0.45 | 0:00:11 | |
 |
9 | Endmill1 Flat | 1/4 FLAT ENDMILL | -0.032 | 0:00:03 | |