| Tl BMP | Tl # | Tl type | Tl name | Z-Min | Cycle time | Holder (old) |
|---|---|---|---|---|---|---|
| 0:00:02 | ||||||
 |
1 | Drill | 11/32 DRILL | -2.3 | 0:00:27 | |
 |
2 | Endmill1 Flat | 1/2 FLAT ENDMILL | -0.656 | 0:10:30 | |
 |
3 | Drill | NO. 4 DRILL | -2.2 | 0:00:59 | |
 |
4 | Endmill1 Flat | 3/16 FLAT ENDMILL | -0.563 | 0:25:05 | |
 |
5 | Drill | NO. 20 DRILL | -1.1 | 0:00:23 | |
 |
6 | Tap RH | NO. 10-32 TAPRH | -0.9 | 0:00:08 | |
 |
7 | Endmill1 Flat | 5/16 FLAT ENDMILL | -0.394 | 0:00:02 | |
 |
8 | CSink | 1.00 X 90 DEG. C,SINK | -0.594 | 0:00:13 | |