| Tl BMP | Tl # | Tl type | Tl name | Z-Min | Cycle time | Holder (old) |
|---|---|---|---|---|---|---|
| 0:32:08 | ||||||
 |
1 | Drill | 3/8 DRILL | -1.9 | 0:00:59 | |
 |
1 | Drill | 3/8 DRILL JOBBER | -1.9 | 0:00:54 | |
 |
2 | Endmill1 Flat | 5/16 FLAT ENDMILL | -0.563 | 0:32:08 | |
 |
3 | Endmill1 Flat | 1/4 FLAT ENDMILL | -0.751 | 0:02:45 | |
 |
4 | Endmill2 Sphere | 1/8 BALL ENDMILL | -0.7505 | 0:15:02 | |
 |
5 | Endmill1 Flat | 3/8 FLAT ENDMILL | -1.82 | 0:02:04 | |
 |
6 | Chamfer mill | 1/2 CARB CHAMFERMILL | -0.05 | 0:02:11 | |
 |
7 | Endmill1 Flat | 1/2 FLAT ENDMILL | -0.656 | 0:00:09 | |