| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:06:38 | |||||||
 |
1 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -0.23 |
 |
2 | Flat endmill | 3/4 FLAT ENDMILL 5 FLUTE | 0.75 | 3.75 | 2.0 | -0.25 |
 |
3 | Drill | 16.5 mm VPH-GDS DRILL | 0.65 | 3.0 | 2.0 | -0.85 |
 |
4 | Flat endmill | 1/2 FLAT ENDMILL SGS | 0.5 | 3.0 | 1.0 | -0.85 |
 |
5 | Taper mill | 3/8 X 20 DEG ENDMILL | 0.06 | 2.0 | 0.437 | -0.35 |
 |
6 | Drill | NO. 32 CARBIDE DRILL | 0.116 | 3.0 | 2.0 | -0.57 |
 |
7 | Right-hand tap | NO. 6-32 TAPRH | 0.138 | 3.0 | 2.0 | -0.45 |