| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:01:24 | |||||||
 |
1 | General turning tool | OD ROUGH RIGHT - 80 DEG. | 0.0313 | 0.0 | ||
 |
5 | Drilling tool | END MILL 1.00 DIA. -.015R | 1.0 | -0.93 | ||
 |
7 | Boring bar | ID ROUGH MIN. .75 DIA. - 75 DEG. | 0.0313 | -0.8912 | ||
 |
9 | Grooving tool | ID GROOVE - 080W ID GRV TOOL | 0.008 | -0.375 | ||
 |
11 | Threading tool | ID THREAD - MIN. .25 DIA. | 0.0108 | 0.2133 | ||