| Datum | 20.05.2016 - 13:20:31 |
| MC-Dateiname | T12.mcx-9 |
| Voller MC-Dateiname | C:\Users\Public\Documents\schulung\T12\T12.mcx-9 |
| Maschine | C30_V9.mmd-9 |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:43 | |||||||
 |
1 | Drill | 9/64 DRILL | 0.1406 | 3.0 | 2.0 | -0.66 |
 |
2 | Tap RH | NO. 8-32 TAPRH FOR TITANIUM | 0.164 | 0.992 | 0.5 | -0.58 |
 |
3 | Drill | NO. 15 DRILL CARBIDE | 0.18 | 3.0 | 2.0 | -0.6 |
 |
4 | Drill | 25/64 DRILL CARBIDE | 0.3906 | 3.0 | 2.0 | -0.675 |
 |
5 | Undefined | SAE#4 PORT TOOL | 1.0 | 2.0 | 1.0 | -0.62 |
 |
6 | Tap RH | 7/16-20 TAPRH | 0.4375 | 2.6875 | 1.375 | -0.45 |
 |
7 | Drill | 9/16 DRILL VPH GDS | 0.5625 | 3.0 | 2.0 | -1.5 |
 |
8 | Endmill1 Flat | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -1.28 |
 |
9 | Slotting | ThreadMill | 0.75 | 2.0 | 0.125 | -1.36 |
 |
10 | Endmill1 Flat | 3/4 FLAT ENDMILL | 0.75 | 3.75 | 2.0 | -0.01 |
 |
11 | Drill | NO. 34 DRILL | 0.111 | 3.0 | 2.0 | -0.45 |
 |
12 | Tap RH | NO. 6-32 TAPRH | 0.138 | 0.789 | 0.375 | -0.3 |
 |
13 | Endmill1 Flat | 1/4 FLAT ENDMILL | 0.25 | 2.5 | 0.5 | -0.164 |
 |
14 | Chamfer mill | 1/2 CARB CHAMFERMILL | 0.5 | 2.0 | 1.0 | -0.045 |
 |
15 | Endmill2 Sphere | 1/16 BALL ENDMILL | 0.0625 | 2.25 | 0.375 | -0.164 |