| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:01:03 | |||||||
 |
1 | Drill | NO. 30 DRILL | 0.1285 | 3.0 | 2.0 | -0.25 |
 |
2 | Countersink | 1.0 X 82 DEG. C,SINK | 1.0 | 2.0 | 1.0 | -0.146 |
 |
3 | Drill | NO. 43 DRILL | 0.089 | 2.0 | 1.0 | -0.3 |
 |
4 | Right-hand tap | NO. 4-40 TAPRH | 0.112 | 0.711 | 0.375 | -0.25 |
 |
5 | Flat endmill | 1/4 FLAT ENDMILL | 0.25 | 2.5 | 0.5 | -0.21 |