| Programmer | Alf |
| Date | 12/17/2021 - 7:52:36 AM |
| MC-Filename | Plate-Top-1st.mcam |
| File description | Merged File name = R:\RAYT\FIXTURES\DMU50 FIXTURES\V562M 4 INCH VISE ON VP56M RISER.mcx-9 Original Import File name = X:\901805_Coastal_Biogeochemical_Sensing\mpHOx\Solidworks\SW20211130\Plate-Top.SLDPRT |
| Machine | DMG_DMU_TNC.mcam-mmd |
| Postprocessor | DMG_DMU_TNC.psT |
| Stock | X12.000 Y6.000 Z0.500 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:11:27 | |||||||
 |
8 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | 2.65 |
 |
13 | Drill | LTR. F DRILL | 0.257 | 3.0 | 2.0 | -0.63 |
 |
14 | Flat endmill | 3/16 FLAT ENDMILL | 0.1875 | 2.375 | 0.4375 | -0.53 |
 |
15 | Drill | NO. 4 DRILL TAPER LENGTH | 0.209 | 3.0 | 2.0 | -0.5 |
 |
16 | Right-hand tap | 1/4-20 TAPRH | 0.25 | 3.0 | 2.0 | 2.1 |
 |
17 | Drill | LTR. F DRILL JOBBER | 0.257 | 3.0 | 2.0 | 0.65 |
 |
18 | Roundover | 1/8 CARB CORNER E.M. | 0.117 | 2.0 | 0.75 | -0.125 |