| Programmer | Alf |
| Date | 10/2/2020 - 12:41:00 PM |
| MC-Filename | StealthCam_Housing_Endcap-Default-2ndOpp.mcam |
| File description | Original Import File name = X:\902000_StealthCam\Mechanical\Electronics_Housing\StealthCam_Housing_Endcap.SLDPRT |
| Machine | GENERIC HAAS 4X MILL2.mcam-mmd |
| Postprocessor | GENERIC HAAS 4X MILL.PST |
| Stock | D6.250 x L0.625 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:02:47 | |||||||
 |
1 | Drill | NO. 27 DRILL | 0.144 | 3.0 | 2.0 | -0.35 |
 |
2 | Flat endmill | 3/16 FLAT ENDMILL | 0.1875 | 2.375 | 0.4375 | -0.125 |
 |
3 | Drill | 25/64 DRILL | 0.3906 | 3.0 | 2.0 | -0.8 |
 |
4 | Undefined | SAE#4 PORT TOOL | 1.0 | 2.0 | 1.0 | -0.62 |
 |
5 | Right-hand tap | 7/16-20 TAPRH | 0.4375 | 3.0 | 2.0 | -0.5 |
 |
6 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -0.64 |
 |
7 | Taper mill | 1/4 X 20 DEG ENDMILL | 0.06 | 2.0 | 0.26 | -0.09 |