| Programmer | Alf |
| Date | 10/7/2020 - 6:33:22 AM |
| MC-Filename | StealthCam_Housing_Endcap-Port-End-1stOpp.mcam |
| File description | Original Import File name = X:\902000_StealthCam\Mechanical\Electronics_Housing\StealthCam_Housing_Endcap.SLDPRT |
| Machine | GENERIC HAAS 4X MILL2.mcam-mmd |
| Postprocessor | GENERIC HAAS 4X MILL.PST |
| Stock | D6.250 x L0.625 |
MyComment
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:24:47 | |||||||
 |
1 | Drill | NO. 23 DRILL | 0.154 | 3.0 | 2.0 | -0.35 |
 |
2 | Flat endmill | 3/16 FLAT ENDMILL | 0.1875 | 2.375 | 0.4375 | -0.125 |
 |
3 | Drill | 1/8 DRILL | 0.125 | 3.0 | 2.0 | -0.35 |
 |
4 | Right-hand tap | NO. 6-32 ROLL TAPRH | 0.138 | 3.0 | 2.0 | -0.37 |
 |
5 | Drill | 25/64 DRILL | 0.3906 | 3.0 | 2.0 | -0.75 |
 |
6 | Flat endmill | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -0.64 |
 |
7 | Slotting | 0.5 Slotting Tool or Saw x .140 wide | 0.5 | 2.0 | 0.14 | -0.328 |
 |
8 | Slotting | 0.375 Slotting Keycutter x .39 wide | 0.375 | 2.0 | 0.039 | -0.083 |