| Datum | 18.07.2018 - 14:27:46 |
| MC-Dateiname | Bohrplatte.mcam |
| Voller MC-Dateiname | C:\Users\GMCCS\Desktop\Bohrplatte.mcam |
| Maschine | TNC530i_new.mcam-mmd |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:00:44 | |||||||
 |
1 | Drill | 5/8 VPH-GDS DRILL | 0.625 | 3.0 | 2.0 | -1.45 |
 |
2 | Flat endmill | 1/2 FLAT ENDMILL | 0.5 | 3.0 | 1.0 | -1.25 |
 |
3 | Slotting | ThreadMill | 0.49 | 2.0 | 0.125 | -1.2 |
 |
4 | Drill | 25/64 CARBIDE DRILL | 0.3906 | 3.0 | 2.0 | -1.3 |
 |
5 | Undefined | SAE 4 PORT TOOL | 1.0 | 2.0 | 1.0 | -0.62 |
 |
6 | Right-hand tap | 7/16-20 TAPRH | 0.4375 | 2.6875 | 1.375 | -1.0 |
 |
7 | Drill | LTR. I CARBIDE DRILL | 0.272 | 3.0 | 2.0 | -1.3 |
 |
8 | Right-hand tap | 5/16-24 TAPRH TI TAP | 0.3125 | 1.9375 | 1.0 | -0.75 |
 |
9 | Drill | 1/2 CARBIDE DRILL | 0.5 | 3.0 | 2.0 | -1.35 |
 |
10 | Right-hand tap | 9/16-18 TAPRH | 0.5625 | 3.4375 | 1.75 | -0.6 |