| Datum | 20.05.2016 - 13:20:31 |
| MC-Dateiname | T12.mcx-9 |
| Voller MC-Dateiname | C:\Users\Public\Documents\schulung\T12\T12.mcx-9 |
| Maschine | C30_V9.mmd-9 |
| Material | ALUMINUM inch - 2024 |
| Tl BMP | Tl # | Tl type | Tl name | Tl diam. | Tl length | Tl Cutlength | Z-Min |
|---|---|---|---|---|---|---|---|
| 0:03:26 | |||||||
 |
1 | Drill | 1/2 DRILL | 0.5 | 3.0 | 2.0 | -0.63 |
 |
2 | Endmill1 Flat | 3/8 FLAT ENDMILL | 0.375 | 2.5 | 0.75 | -0.52 |
 |
3 | Endmill1 Flat | 3/16 FLAT ENDMILL | 0.1875 | 2.375 | 0.4375 | -0.375 |
 |
4 | Roundover | 1/16 CARB CORNER ROUNDER | 0.25 | 2.0 | 0.75 | -0.125 |
 |
5 | Drill | NO. 16 DRILL | 0.177 | 3.0 | 2.0 | -0.6 |
 |
6 | Drill | NO. 25 DRILL | 0.1495 | 3.0 | 2.0 | -0.6 |
 |
7 | Drill | 1/8 DRILL | 0.125 | 3.0 | 2.0 | -0.57 |
 |
8 | Tap RH | 6-32 UNC Right-Handed Tap - 0.138 | 0.138 | 0.789 | 0.375 | -0.57 |
 |
9 | Drill | NO. 39 DRILL | 0.0995 | 2.0 | 1.0 | -0.57 |
 |
10 | Tap RH | NO. 4-40 TAPRH ROLLTAP | 0.112 | 0.711 | 0.375 | -0.57 |